It is possible to set the number of spares and the size of
data stripes via draidspares & dreaddata parameters.
Signed-off-by: Stefan Hrdlicka <s.hrdli...@proxmox.com>
---
PVE/API2/Disks/ZFS.pm | 44 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/PVE/API2/Disks/ZFS.pm b/PVE/API2/Disks/ZFS.pm
index eeb9f48..571bc90 100644
--- a/PVE/API2/Disks/ZFS.pm
+++ b/PVE/API2/Disks/ZFS.pm
@@ -299,12 +299,28 @@ __PACKAGE__->register_method ({
raidlevel => {
type => 'string',
description => 'The RAID level to use.',
- enum => ['single', 'mirror', 'raid10', 'raidz', 'raidz2',
'raidz3'],
+ enum => [
+ 'single', 'mirror',
+ 'raid10', 'raidz', 'raidz2', 'raidz3',
+ 'draid', 'draid2', 'draid3',
+ ],
},
devices => {
type => 'string', format => 'string-list',
description => 'The block devices you want to create the zpool
on.',
},
+ draiddata => {
+ type => 'integer',
+ minimum => 1,
+ optional => 1,
+ description => 'The number of data devices per redundancy
group. (dRAID)',
+ },
+ draidspares => {
+ type => 'integer',
+ minimum => 0,
+ optional => 1,
+ description => 'Number of dRAID spares.',
+ },
ashift => {
type => 'integer',
minimum => 9,
@@ -339,6 +355,8 @@ __PACKAGE__->register_method ({
my $devs = [PVE::Tools::split_list($param->{devices})];
my $raidlevel = $param->{raidlevel};
my $compression = $param->{compression} // 'on';
+ my $draid_data = $param->{draiddata};
+ my $draid_spares = $param->{draidspares};
for my $dev (@$devs) {
$dev = PVE::Diskmanage::verify_blockdev_path($dev);
@@ -354,6 +372,9 @@ __PACKAGE__->register_method ({
raidz => 3,
raidz2 => 4,
raidz3 => 5,
+ draid => 3,
+ draid2 => 4,
+ draid3 => 5,
};
# sanity checks
@@ -366,6 +387,22 @@ __PACKAGE__->register_method ({
die "$raidlevel needs at least $mindisks->{$raidlevel} disks\n"
if $numdisks < $mindisks->{$raidlevel};
+ # draid checks
+ if ($raidlevel =~ m/^draid/) {
+ # bare minimum would be two drives:
+ # one parity & one data drive this code doesn't allow that because
+ # it makes no sense, at least one spare disk should be used
+ my $draidmin = $mindisks->{$raidlevel} - 2;
+ $draidmin += $draid_data if $draid_data;
+ $draidmin += $draid_spares if $draid_spares;
+
+ die "At least $draidmin disks needed for current dRAID config\n"
+ if $numdisks < $draidmin;
+ } else {
+ die "draidspares and/or draiddata set without using dRAID"
+ if ($draid_spares or $draid_data);
+ }
+
my $code = sub {
for my $dev (@$devs) {
PVE::Diskmanage::assert_disk_unused($dev);
@@ -402,6 +439,11 @@ __PACKAGE__->register_method ({
}
} elsif ($raidlevel eq 'single') {
push @$cmd, $devs->[0];
+ } elsif ($raidlevel =~ m/^draid/) {
+ my $draid_cmd = $raidlevel;
+ $draid_cmd .= ":${draid_data}d" if $draid_data;
+ $draid_cmd .= ":${draid_spares}s" if $draid_spares;
+ push @$cmd, $draid_cmd, @$devs;
} else {
push @$cmd, $raidlevel, @$devs;
}
--
2.30.2
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
