If you're speaking in terms of what type of samples do I use, I use a variety of stuff from different artists, and I use Southern hip-hop vocals, trap house, and many many more. I purchased the samples off of eBay, and they are pretty good quality. All in all like I said, I have probably over 120 gigs worth of these different samples from drums, bases, guitars, keys, strings, vocals, and many many more.
Sent from my iPhone > On May 24, 2016, at 6:39 PM, TheOreoMonster <[email protected]> wrote: > > anything in logic. Sound Flower or Loop back are virtual audio devices. you > set one as the output in logic and use it as your input audio device in > protools basically. BTW what are your sources for third party EXS 24 samples? >> On May 24, 2016, at 7:35 PM, Darwin May <[email protected]> wrote: >> >> Hello, I was wanting to know, if this would work with all of the soft >> instruments and logic Pro? Or, would it only work with the software >> instruments that is built into the logic Pro and not the EX24 sampler. The >> reason I ask, is because I have over 120 gigs worth of samples that I use >> and logic Pro. of course not all at the same time. >> >> Sent from my iPhone >> >>> On May 24, 2016, at 2:28 PM, TheOreoMonster <[email protected]> >>> wrote: >>> >>> There are a few legit sites that had sound flower for download and while >>> its not being developed anymore it still works. I do however have loopback >>> and it works great in the use case i have tried but haven’t tried it in a >>> DAW setting yet. But its been rock solid so i can’t imagine it won’t work. >>> >>> Regarding Kontakt, They are working on an update as discussed previously >>> that will allow it to self voice using system voice and if you are using >>> one of their Contact ss series keyboard. Since all the knobs and buttons on >>> the keyboard are already mapped to appropriate controls in Contact you can >>> control contact easily from this keyboard. When you touch a button or knob >>> on the keyboard it will announce what that button is assigned to in the >>> current window of contact that’s visible and when you turn the knob or >>> press a button it will announce the parameter change as well. While the >>> demo was done using the stand alone player they said plug instances >>> should work the same and last i checked their plug in instances were VST, >>> AAX and AU, so it should work in all the Major DAW’s including ProTools no >>> wrapper needed. >>> hat >>> For those not in the know, system voice is the voice the OS can use for >>> announcements of all types. It has access to all the same voices as voice >>> over and like voice over is set to alex by default. For example you can >>> set the time to be announced every hour, half hour or quarter hour and that >>> uses system voice. If you have keyboard commanders turned on and you press >>> right option t to announce the time its also using system voice. You can >>> set its speed and voices separate of voice overs settings in the System >>> preferences Speech pane. >>> >>>> On May 24, 2016, at 2:58 PM, Slau Halatyn <[email protected]> wrote: >>>> >>>> Hi Joy, >>>> >>>> I'd imagine it's the same kind of deal with the OmniSphere stuff. The >>>> trouble, of course, is that, like Native Instruments' stuff, we're talking >>>> about thousands of sounds so saving out presets to TFX format is virtually >>>> inconceivable. >>>> >>>> Yes, Rogue Amoeba did put out LoopBack a little while ago and I purchased >>>> it but haven't tried it yet. >>>> >>>> Cheers, >>>> >>>> Slau >>>> >>>>> On May 24, 2016, at 12:30 PM, 'Joy Bausch' via Pro Tools Accessibility >>>>> <[email protected]> wrote: >>>>> >>>>> Hi Slau, >>>>> thanks so much for your reply. As for your suggestion concerning >>>>> SoundFlower, I checked it out, and it looks like it is currently not >>>>> supported. However, Rogue Amoeba, who apparently were the last >>>>> distributors, now have an add-on available called LoopBack, which does >>>>> the same thing. I'll definitely give that a go, knowing that this Company >>>>> has some other great products out, like Audio Hijack. >>>>> Thanks for pointing me that way. >>>>> As for virtual instruments, I haven't taken the plunge into buying any, >>>>> mostly because I couldn't find reliable info on what works. >>>>> All I know is what we all know: Native Instruments is a no-no. But what >>>>> about Omnisphere or Nexus or something down that road? I'm mainly after >>>>> hig-quality bread-and-butter-sounds, plus orchestral. Of course some >>>>> electronic/synth sounds are always welcome1but since I'm a bit of an >>>>> analogue nerd i would make my own...:) >>>>> So any advice on that? I am thinking about giving the NI Komplete Kontrol >>>>> keyboard a try, but if I could find something similar and less costly >>>>> that would be great. >>>>> >>>>> Kindest regards, and again thanks. >>>>> >>>>> Joy >>>>> >>>>> Von meinem iPhone gesendet >>>>> >>>>>> Am 24.05.2016 um 17:39 schrieb Slau Halatyn <[email protected]>: >>>>>> >>>>>> Hi Joy, >>>>>> >>>>>> Pretty much anything that has automation parameters is going to be >>>>>> accessible. The only aspect of virtual plug-ins that is generally not >>>>>> accessible is the presets. Once the presets are accessed and saved as >>>>>> .tfx files, they can be shared. Incidentally, the Logic sounds can be >>>>>> accessed from within Pro Tools by using Soundflower. There are videos >>>>>> and tutorials online on how to do this dating back to Pro Tools version >>>>>> 11. I did it back then and it does work. I haven't done it in a while >>>>>> but it's certainly possible. You might want to look into that. Aside >>>>>> from Logic's stock sounds, which third party virtual instruments have >>>>>> you used in Logic? >>>>>> >>>>>> Slau >>>>>> >>>>>>> On May 24, 2016, at 1:14 AM, 'Joy Bausch' via Pro Tools Accessibility >>>>>>> <[email protected]> wrote: >>>>>>> >>>>>>> Cheers guys, >>>>>>> subject already states what I'm curious about: what software >>>>>>> instruments (synths, samplers, drum machinees etc.) are you using, what >>>>>>> is VoiceOver-friendly and so on. >>>>>>> Coming from Logic Pro myself i have to say PTs selection leaves a lot >>>>>>> to be disered, although that is a personal taste matter too. >>>>>>> Anyways, would appreciate any input on this. >>>>>>> Thanks! >>>>>>> Joy >>>>>>> >>>>>>> >>>>>>> >>>>>>> Von meinem iPhone gesendet >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "Pro Tools Accessibility" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>>> an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Pro Tools Accessibility" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>>> an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "Pro Tools Accessibility" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "Pro Tools Accessibility" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Pro Tools Accessibility" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Pro Tools Accessibility" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Pro Tools Accessibility" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Pro Tools Accessibility" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
