Re: USB Camera and SCSI Mass Storage device

[Dan Devine]

OK, tried that....all devices /dev/sda --> /dev/sdd return with "mount: /dev/sd? is not a valid block device"... I've also read through the PDF http://www.omniflashproducts.com/downloads/OmniFlash/Linux/LinuxMountingInstructions.PDF Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00   Vendor: FUJIFILM Model: USB-DRIVEUNIT    Rev: 1.00   Type:   Direct-Access                    ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00   Vendor: ASUS     Model: CRW-4816A        Rev: 1.0   Type:   CD-ROM                           ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 00 Lun: 00   Vendor:          Model:                  Rev:   Type:   <NULL>                ANSI SCSI revision: ffffffff It's there....how do I get to it? Thanks, DD On Sun, 2003-02-02 at 19:10, HakanTerzioglu wrote:  Hi, Your camera , as a mass-storage device, is  a emulated SCSI device for Linux, so if you look at your logs you can see which drive it is bounded to, and so you can mount that drive and reach your photos. For mine ( a cheap digital camera costed me 100$) it is /dev/sdb, cause i have a scsi disk at /dev/sda. I mount usb cam like : mount /dev/sdb /mnt/camera and it just works. (My cam is not supported by gtkam either by the way) Be careful not to give something like /dev/sdb1 sdb2 or so, you have to give only the device not a partiton.   Generally digi cams have fat fs inside the internal memory so it wont be a problem for Psyche to mount it with its default kernel.   YOu can examine the logs to see the usb mass storage like ; dmesg|grep usb     Cheers; hakan. ----- Original Message ----- From: Dan Devine To: RedHat 8.0 mailing list Sent: Monday, February 03, 2003 3:53 AM Subject: Re: USB Camera and SCSI Mass Storage device Thanks for the help Stephen, here's what I'm seeing right now (directory/contents)... /proc/scsi ide-scsi  scsi  usb-storage-0  usb-storage-1 Also, I got the following......... /proc/bus/usb 001  002  003  devices  drivers I can see how /dev/scd0    (scsi disk 0)... get's mapped to /dev/cdrom.  I just had to redo that with "ln -s /dev/scd0 /dev/cdrom" since I first posted on the list. Where is the USB device?  I've successfully mounted /dev/scd1 with the addition of this line to the /etc/fstab /dev/scd1 /camera usbfs defaults 0 0 when examining the mount, I get the following directory...... /camera 001  002  003  devices  drivers I've read the devices file and have found the entry for the camera, but I'm unable to actually get any of the data or even find a "drive" where I could see the files..... What am I doing wrong? Thanks, Dan I've also tried to map -- Dan Devine <[EMAIL PROTECTED]> -- Dan Devine <[EMAIL PROTECTED]>