Run NEAT from the console. It should see and configure the card to a certain extent. Then go and edit the card settings as you would a normal network card. I installed a wireless card in a notebook, and neat brough the card up and allowed me to configure it with in minutes.
This should help Wolf |-----Original Message----- |From: Charles Johnson [mailto:charles.johnson@;centerstone.org] |Sent: Friday, 15 November 2002 01:50 am |To: [EMAIL PROTECTED] |Subject: Wireless newbie | | |I am running RedHat 8.0, kernel 2.4.18-17.8.0 and I have an |Orinoco gold PCMCIA card with a PCI adapter card. I am trying |to get this card to come up in the system. There is an |orinoco_cs driver on the system, but I was under the |impression that I needed an orinoco_plx driver for this |particular set up. | |So, can someone point me in the right direction for brining up |this card? I googled for information, but nothing struck |me...I must be really dense about this. :-) | |Assistance would be most welcome. | |Charles Johnson |Manager, IS Applications |Phone: 463-6527 |Fax: 463-6503 |Help Desk: 463-6516 ###################################################################### Attention: This e-mail message is privileged and confidential. If you are not the intended recipient please delete the message and notify the sender. Any views or opinions presented are solely those of the author. This e-mail has been scanned and cleared by MailMarshal www.marshalsoftware.com ###################################################################### -- Psyche-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/psyche-list
