On Tue, 2002-10-22 at 18:55, Donald E. Stidwell wrote: > From: Donald E. Stidwell <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Subject: Wireless Question > Date: 22 Oct 2002 18:53:07 -0400 > > Okay,I'm happier than a pig in you know what with my laptop running RH8. > It didn't even whine about my using 128-bit WEP on my wireless card and > the wireless networking configuration is a snap. > > Only one issue. I always get a boot message "eth0: channel out of range > (0)" when the ssh daemon starts. Needless to say, I can not ssh into my > laptop when using my wireless card (it works fine with my wired card). > Note this only affects ssh. Normal wireless operations work as expected. > I get this error whether WEP is turned on or off, so WEP is not the > problem. > > Any ideas on this? Anyone seen any error like this using a wireless card > and ssh? > > Oh, and distance is not an issue either. I'm sitting less than two feet > from my AP and signal strength is a perfect 92/92. > > Don >
Found problem. When I installed Psyche, I did it with my wired ethernet card and set the firewall rules to allow incoming ssh. Forgot that the wireless card is a different interface and never set the firewall rules for it. Problem solved. Sheesh - sometimes I'm not the brightest bulb around! :) Don
