Good to hear it is working now.
Another option if it had been a hardware issue is to get a USB sd card
holder. They are cheap now and work well.
On 2/10/2014 10:01 AM, Kurt @ VR-FX wrote:
Strangely enough - from in Dev. Mgr. - I accessed the SD Host
Controller Properties - Disabled it - then Re-Enabled it - and now it
works!
Duh - Stupid MS OS...
-K-
On 2/10/2014 11:10 AM, Kurt @ VR-FX wrote:
MY BAD - I just found SD Host Controller under Device Manager.
It claims it IS Working Properly!
-K-
On 2/10/2014 11:06 AM, Kurt @ VR-FX wrote:
Hey Dave - thanks for such quick feedback!
Yes - when card is in the BOT - its Readable - and I can select
files to print - so, its definitely not a Card issue.
I looked under Device Mangler - and could not find a reference to
where I would find SD card management. I even went to Disk
Management - but, of course - drive was NOT showing up!
-K-
On 2/10/2014 10:59 AM, Dave Crozier wrote:
First thing to do is see if you can read the card on another
machine.. Assuming that is true I would check the drivers for the
SDCard in the Computer/Manage section to see if they are working
OK. If they have simply been corrupted then you can remov the
drivers and refresh the devices screen to get it to pick up the
card reader device.
Dave
-----Original Message-----
From: ProFox [mailto:[email protected]] On Behalf Of Kurt @
VR-FX
Sent: 10 February 2014 15:56
To: [email protected]
Subject: [NF] SD Card Access Problem...
Hey Folks,
I know I haven't posted on here very much for a while - especially
re:Fox - but, these days I've moved more in the direction of 3D
Printing.
So - I got this Bot - and it prints for an SD Card. Problem is - I
only got 1 PC w/SD Card slot. And, today - upon putting the card in
- its NOT Coming up on the PC (which is actually my old Laptop).
Not sure if there is a true HW problem on the machine. But - unless
I can write to the SD card - I can't even do 3D Printing on my Bot!
As such - I am kinda SOL - and really desperate.
Any suggestions?
Laptop is an OLD Alienware - running Vista.
TIA,
-K-
[excessive quoting removed by server]
_______________________________________________
Post Messages to: [email protected]
Subscription Maintenance: http://mail.leafe.com/mailman/listinfo/profox
OT-free version of this list: http://mail.leafe.com/mailman/listinfo/profoxtech
Searchable Archive: http://leafe.com/archives/search/profox
This message: http://leafe.com/archives/byMID/profox/[email protected]
** All postings, unless explicitly stated otherwise, are the opinions of the
author, and do not constitute legal or medical advice. This statement is added
to the messages for those lawyers who are too stupid to see the obvious.
