Oh thanks for that tip! Ok, so:
- I set `machdep.allowaperture=2` in /etc/sysctl.conf
- I ran `doas rcctl enable xenodm`
- I got an xorg.conf online
(https://gist.githubusercontent.com/AdrianKoshka/c6c4a7718de43f6708711c7664e70aa0/raw/85cff6844bf1320193e3158258657dc43954a0c2/xorg.conf)
and put it in /etc/X11/
After rebooting, xenodm won't start and startx hangs. I have the
Xorg.0.log and dmesg attached. Am I missing anything else?
On 7/17/23 10:18 PM, George Koehler wrote:
On Mon, 17 Jul 2023 17:15:34 +0000
Jag Talon <jag.ta...@posteo.net> wrote:
Ah I forgot to mention that it doesn't have X running! Do you know if
there's an equivalent for the console?
I want you to run X and use the command
$ xset dpms force off
This works on my Cube G4, and might work on your iMac G3 because both
machines have ATI Rage 128 graphics. To start X on your iMac, put
put "machdep.allowaperture=2" in /etc/sysctl.conf, do
"rcctl enable xenodm", and reboot.
I have an external display on my Cube's VGA port, so my other option
is the display's power button. Your iMac's internal display doesn't
have a power button, but does use much electricity (it's an old CRT),
so I suggest running X for xset(1).
There is no Rage 128 driver in OpenBSD's kernel, but there is r128(4)
in X, so X is the only way to off the display.
[ 104.634] (--) no aperture driver access: only wsfb driver useable
[ 104.882] (--) Using wscons driver on /dev/ttyC4
[ 105.729]
X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
[ 105.730] Current Operating System: OpenBSD jagtalon.com 7.3 GENERIC#100 macppc
[ 105.730]
[ 105.730] Current version of pixman: 0.40.0
[ 105.730] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 105.730] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 105.733] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 18 08:07:40 2023
[ 105.983] (==) Using config file: "/etc/X11/xorg.conf"
[ 105.983] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[ 106.287] (==) No Layout section. Using the first Screen section.
[ 106.338] (**) |-->Screen "Default Screen" (0)
[ 106.338] (**) | |-->Monitor "Generic Monitor"
[ 106.395] (**) | |-->Device "ATI Technologies Inc Rage 128 RL/VR AGP"
[ 106.396] (==) Automatically adding devices
[ 106.396] (==) Automatically enabling devices
[ 106.396] (==) Not automatically adding GPU devices
[ 106.396] (==) Automatically binding GPU devices
[ 106.431] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 107.359] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 107.359] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 107.359] (II) The server relies on wscons to provide the list of input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[ 107.421] (II) Loader magic: 0x2bc23598
[ 107.422] (II) Module ABI versions:
[ 107.422] X.Org ANSI C Emulation: 0.4
[ 107.422] X.Org Video Driver: 25.2
[ 107.422] X.Org XInput driver : 24.4
[ 107.422] X.Org Server Extension : 10.0
[ 107.547] (--) PCI:*(0@0:16:0) 1002:5052:1002:5052 rev 0, Mem @ 0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256
[ 107.597] (II) LoadModule: "glx"
[ 107.953] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 109.406] (II) Module glx: vendor="X.Org Foundation"
[ 109.406] compiled for 1.21.1.6, module version = 1.0.0
[ 109.406] ABI class: X.Org Server Extension, version 10.0
[ 109.463] (II) LoadModule: "r128"
[ 109.466] (II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.so
[ 109.506] (II) Module r128: vendor="X.Org Foundation"
[ 109.506] compiled for 1.21.1.6, module version = 6.12.0
[ 109.506] Module class: X.Org Video Driver
[ 109.506] ABI class: X.Org Video Driver, version 25.2
[ 109.520] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 109.541] (**) R128(0): Depth 8, (--) framebuffer bpp 8
[ 109.541] (==) R128(0): Default visual is PseudoColor
[ 109.541] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 109.542] (II) R128(0): PCI bus 0 card 16 func 0
[ 109.542] (II) R128(0): Pixel depth = 8 bits stored in 1 byte (8 bpp pixmaps)
[ 109.543] (II) R128(0): Acceleration of RENDER operations will be enabled upon successful loading of DRI and EXA.
[ 109.543] (II) R128(0): VGAAccess option set to FALSE, VGA module load skipped.
[ 109.543] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[ 109.543] (--) R128(0): Chipset: "ATI Rage 128 Pro VR PR (PCI)" (ChipID = 0x5052)
[ 109.543] (--) R128(0): Linear framebuffer at 0x94000000
[ 109.543] (--) R128(0): MMIO registers at 0x90000000
[ 109.544] (EE) R128(0): Unable to map MMIO aperture. Invalid argument (22)
[ 109.545] (WW) R128(0): No outputs definitely connected, trying again...
[ 109.545] (WW) R128(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 109.545] (==) R128(0): DPI set to (96, 96)
[ 109.545] (II) Loading sub module "fb"
[ 109.545] (II) LoadModule: "fb"
[ 109.545] (II) Module "fb" already built-in
[ 109.545] (II) R128(0): Loading EXA module...
[ 109.545] (II) Loading sub module "exa"
[ 109.546] (II) LoadModule: "exa"
[ 109.561] (II) Loading /usr/X11R6/lib/modules/libexa.so
[ 109.575] (II) Module exa: vendor="X.Org Foundation"
[ 109.575] compiled for 1.21.1.6, module version = 2.6.0
[ 109.575] ABI class: X.Org Video Driver, version 25.2
[ 109.575] (II) R128(0): Loading EXA module.
[ 109.601] (EE) R128(0): No modes.
[ 109.601] (II) UnloadModule: "r128"
[ 109.601] (II) UnloadSubModule: "exa"
[ 109.601] (II) Unloading exa
[ 109.602] (EE) Screen(s) found, but none have a usable configuration.
[ 109.602] (EE)
Fatal server error:
[ 109.602] (EE) no screens found(EE)
[ 109.602] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 109.603] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 109.603] (EE)
[ 109.625] (EE) Server terminated with error (1). Closing log file.
eserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3 (GENERIC) #100: Sun Mar 26 02:04:55 MDT 2023
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 502931456 (479MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac2,2
cpu0 at mainbus0: 750 (Revision 0x8302): 500 MHz: 512KB backside cache
mem0 at mainbus0
spdmem0 at mem0: 256MB SDRAM non-parity PC133CL3
spdmem1 at mem0: 256MB SDRAM non-parity PC133CL3
memc0 at mainbus0: uni-n rev 0x8
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
agp at pchb0 not configured
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0: irq 47
pgs0 at macgpio0: irq 55
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker
audio0 at awacs0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x9, 0% charged
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct15 30>
wd0: 16-sector PIO, LBA, 28652MB, 58680720 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8184, AA32> removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at macobio0 offset 0x20000 irq 20: DMA
wdc2 at macobio0 offset 0x21000 irq 21: DMA
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:15:83:d6
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
"Apple Uni-N Eth Firewire" rev 0x01 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, address
00:30:65:d9:9c:52
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
uhub2 at uhub0 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in
Apple Extended USB Keyboard" rev 1.10/4.20 addr 2
uhidev0 at uhub2 port 3 configuration 1 interface 0 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 3 configuration 1 interface 1 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 3: 4 usages, 4 keys, enum
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
root on wd0a (b97b4c05d4aff06c.a) swap on wd0b dump on wd0b
syncing disks... done
[ using 1327268 bytes of bsd ELF symbol table ]
console out [ATY,Rage128Pk] console in [keyboard], using USB
: memaddr 94000000, size 4000000 : consaddr 96008000 : ioaddr 90020000, size
20000: width 800 linebytes 1024 height 600 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3 (GENERIC) #100: Sun Mar 26 02:04:55 MDT 2023
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 502927360 (479MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac2,2
cpu0 at mainbus0: 750 (Revision 0x8302): 500 MHz: 512KB backside cache
mem0 at mainbus0
spdmem0 at mem0: 256MB SDRAM non-parity PC133CL3
spdmem1 at mem0: 256MB SDRAM non-parity PC133CL3
memc0 at mainbus0: uni-n rev 0x8
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
agp at pchb0 not configured
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0: irq 47
pgs0 at macgpio0: irq 55
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker
audio0 at awacs0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x9, 0% charged
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct15 30>
wd0: 16-sector PIO, LBA, 28652MB, 58680720 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8184, AA32> removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at macobio0 offset 0x20000 irq 20: DMA
wdc2 at macobio0 offset 0x21000 irq 21: DMA
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:15:83:d6
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
"Apple Uni-N Eth Firewire" rev 0x01 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, address
00:30:65:d9:9c:52
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
uhub2 at uhub0 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in
Apple Extended USB Keyboard" rev 1.10/4.20 addr 2
uhidev0 at uhub2 port 3 configuration 1 interface 0 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 3 configuration 1 interface 1 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 3: 4 usages, 4 keys, enum
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
root on wd0a (b97b4c05d4aff06c.a) swap on wd0b dump on wd0b
syncing disks...bio0 o
[ using 1328872 bytes of bsd ELF symbol table ]
console out [ATY,Rage128Pk] console in [keyboard], using USB
: memaddr 94000000, size 4000000 : consaddr 96008000 : ioaddr 90020000, size
20000: width 800 linebytes 1024 height 600 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3 (GENERIC) #100: Sun Mar 26 02:04:55 MDT 2023
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 502931456 (479MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac2,2
cpu0 at mainbus0: 750 (Revision 0x8302): 500 MHz: 512KB backside cache
mem0 at mainbus0
spdmem0 at mem0: 256MB SDRAM non-parity PC133CL3
spdmem1 at mem0: 256MB SDRAM non-parity PC133CL3
memc0 at mainbus0: uni-n rev 0x8
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
agp at pchb0 not configured
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0: irq 47
pgs0 at macgpio0: irq 55
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker
audio0 at awacs0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x9, 0% charged
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct15 30>
wd0: 16-sector PIO, LBA, 28652MB, 58680720 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8184, AA32> removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at macobio0 offset 0x20000 irq 20: DMA
wdc2 at macobio0 offset 0x21000 irq 21: DMA
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:15:83:d6
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
"Apple Uni-N Eth Firewire" rev 0x01 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, address
00:30:65:d9:9c:52
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
uhub2 at uhub0 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in
Apple Extended USB Keyboard" rev 1.10/4.20 addr 2
uhidev0 at uhub2 port 3 configuration 1 interface 0 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 3 configuration 1 interface 1 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 3: 4 usages, 4 keys, enum
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
root on wd0a (b97b4c05d4aff06c.a) swap on wd0b dump on wd0b
syncing disks... done
[ using 1330968 bytes of bsd ELF symbol table ]
console out [ATY,Rage128Pk] console in [keyboard], using USB
: memaddr 94000000, size 4000000 : consaddr 96008000 : ioaddr 90020000, size
20000: width 800 linebytes 1024 height 600 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2023 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.3 (GENERIC) #100: Sun Mar 26 02:04:55 MDT 2023
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 502927360 (479MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac2,2
cpu0 at mainbus0: 750 (Revision 0x8302): 500 MHz: 512KB backside cache
mem0 at mainbus0
spdmem0 at mem0: 256MB SDRAM non-parity PC133CL3
spdmem1 at mem0: 256MB SDRAM non-parity PC133CL3
memc0 at mainbus0: uni-n rev 0x8
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N AGP" rev 0x00
agp at pchb0 not configured
vgafb0 at pci0 dev 16 function 0 "ATI Rage 128" rev 0x00, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0: irq 47
pgs0 at macgpio0: irq 55
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
awacs0 at macobio0 offset 0x14000: irq 24,9,10 speaker
audio0 at awacs0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x9, 0% charged
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <QUANTUM FIREBALLlct15 30>
wd0: 16-sector PIO, LBA, 28652MB, 58680720 sectors
atapiscsi0 at wdc0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8184, AA32> removable
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
cd0(wdc0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wdc1 at macobio0 offset 0x20000 irq 20: DMA
wdc2 at macobio0 offset 0x21000 irq 21: DMA
wi0 at macobio0 offset 0x30000 irq 57:
wi0: Firmware 8.70 variant 1, address 00:30:65:15:83:d6
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00
addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
"Apple Uni-N Eth Firewire" rev 0x01 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41, address
00:30:65:d9:9c:52
bmtphy0 at gem0 phy 0: BCM5201 10/100 PHY, rev. 2
uhub2 at uhub0 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in
Apple Extended USB Keyboard" rev 1.10/4.20 addr 2
uhidev0 at uhub2 port 3 configuration 1 interface 0 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 3 configuration 1 interface 1 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 3: 4 usages, 4 keys, enum
wskbd1 at ucc0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
root on wd0a (b97b4c05d4aff06c.a) swap on wd0b dump on wd0b
