I tried this again setting '-d' as an argument in petitboot.
It just gives the same output, is there any way I can share verbose or debug output for this issue with mpii? On 06/09/2020 10:16, Daniel Pocock wrote: > > > I had another go today, using the latest snapshot: > > sha256sum install68.iso > c8f2f053f4647acb719704eb7a3416b76ec41a0fec4983bafe23a224f21521ea > > Last message in the console: > > mpii0 at pci3 dev 0 function 0 "Symbios Logic SAS2308" rev 0x05: msi > > I left it sitting there for 30 minutes to see if anything else appeared > on the console but it didn't. > > I tried removing the HBA from the slot, then it can boot all the way to > the first question: > > Welcome to the OpenBSD/powerpc64 6.8 installation program. > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? > > The petitboot code had some patch for a crash in mpt3sas, I don't know > if that is related to the mpii code: > https://wiki.raptorcs.com/wiki/Talos_II/Firmware/Public_Beta#Changelog > > Do you have any machine like this yourself or could it be useful to have > remote access to one of them via the BMC? Snapshots can be accessed > over TFTP. > > Will the installer allow me to install to a USB external drive? I could > use that to test further stages of the installation without the HBA. > > I captured all the output from the successful boot (without HBA) in case > it is useful > > Full output from failed boot: > > > > [ 27.647029] kexec_core: Starting new kernel > Hello, World! > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2020 OpenBSD. All rights reserved. > https://www.OpenBSD.org > > OpenBSD 6.8-beta (RAMDISK) #50: Sat Sep 5 14:22:54 MDT 2020 > > dera...@powerpc64.openbsd.org:/usr/src/sys/arch/powerpc64/compile/RAMDISK > real mem = 137438953472 (131072MB) > avail mem = 130714361856 (124658MB) > random: boothowto does not indicate good seed > mainbus0 at root: T2P9D01 REV 1.00 > cpu0 at mainbus0 pir 4: IBM POWER9 2.3, 3000 MHz > cpu0: 32KB 128b/line 8-way L1 I-cache, 32KB 128b/line 8-way L1 D-cache > cpu0: 512KB 128b/line 8-way L2 cache > cpu0: 10MB 128b/line 8-way L3 cache > "bmc" at mainbus0 not configured > "ibm,firmware-versions" at mainbus0 not configured > "ibm,hostboot" at mainbus0 not configured > opal0 at mainbus0: skiboot-9858186 > opalcons0 at opal0: console > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "core-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "mem-temp" at opal0 not configured > "proc-energy" at opal0 not configured > "proc-energy" at opal0 not configured > "proc-energy" at opal0 not configured > "proc-energy" at opal0 not configured > "proc-energy" at opal0 not configured > "proc-energy" at opal0 not configured > "proc-in" at opal0 not configured > "proc-in" at opal0 not configured > "proc-in" at opal0 not configured > "proc-in" at opal0 not configured > "proc-power" at opal0 not configured > "proc-power" at opal0 not configured > "proc-power" at opal0 not configured > "proc-power" at opal0 not configured > "proc-power" at opal0 not configured > "proc-power" at opal0 not configured > "proc-temp" at opal0 not configured > "proc-temp" at opal0 not configured > "vrm-curr" at opal0 not configured > "vrm-curr" at opal0 not configured > "vrm-curr" at opal0 not configured > "vrm-curr" at opal0 not configured > "vrm-in" at opal0 not configured > "vrm-in" at opal0 not configured > "vrm-in" at opal0 not configured > "vrm-in" at opal0 not configured > "vrm-temp" at opal0 not configured > "vrm-temp" at opal0 not configured > "ibm,pcie-slots" at mainbus0 not configured > "ibm,secureboot" at mainbus0 not configured > "imc-counters" at mainbus0 not configured > xics0 at mainbus0 > xive0 at mainbus0 > "ipl-params" at mainbus0 not configured > "lpcm-opb" at mainbus0 not configured > phb0 at mainbus0: chip 0x0 > pci0 at phb0 > ppb0 at pci0 dev 0 function 0 "IBM POWER9 Host" rev 0x00 > pci1 at ppb0 bus 1 > phb1 at mainbus0: chip 0x0 > pci2 at phb1 > ppb1 at pci2 dev 0 function 0 "IBM POWER9 Host" rev 0x00 > pci3 at ppb1 bus 1 > mpii0 at pci3 dev 0 function 0 "Symbios Logic SAS2308" rev 0x05: msi >
