Hi!!
I decide to test openbsd in my macppc
restaurador# sysctl hw
hw.machine=macppc
hw.model=970MP (Revision 0x101)
hw.ncpu=2
hw.byteorder=4321
hw.pagesize=4096
hw.disknames=wd0:03c5614775517f10,cd0:
hw.diskcount=2
hw.sensors.lmtemp0.temp0=28.50 degC
hw.sensors.maxds0.temp0=29.69 degC (Internal)
hw.sensors.maxtmp0.temp0=38.12 degC (Internal)
hw.sensors.maxtmp0.temp1=51.00 degC (External)
hw.sensors.maxtmp1.temp0=36.00 degC (Internal)
hw.sensors.maxtmp1.temp1=34.50 degC (External)
hw.cpuspeed=2000
hw.vendor=Apple Computer, Inc.
hw.product=PowerMac11,2
hw.physmem=2684354560
hw.usermem=2684342272
hw.ncpufound=2
hw.allowpowerdown=1
It was my first time using openfirmware, I do not have any problem with
installation and boot process but I had issues with sata disk and video driver.
An output of a dimes after machine crash (12 hours running without any error,
only two tty with top and other with irrsi in text mode)
restaurador# dmesg
[ using 1151580 bytes of bsd ELF symbol table ]
console out [NVDA,Display-A] console in [keyboard], using USB
using parent NVDA,Parent:: memaddr 98000000, size 8000000 : consaddr 98020000 :
ioaddr 92000000, size 1000000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.2-current (GENERIC.MP) #12: Mon Feb 26 21:33:13 MST 2018
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC.MP
real mem = 2684354560 (2560MB)
avail mem = 2015129600 (1921MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac11,2
cpu0 at mainbus0: 970MP (Revision 0x101): 2000 MHz
cpu1 at mainbus0: 970MP (Revision 0x101): 2000 MHz
mem0 at mainbus0
spdmem0 at mem0: 256MB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at mem0: 256MB DDR2 SDRAM non-parity PC2-4200CL5
spdmem2 at mem0: 1GB DDR2 SDRAM non-parity PC2-4200CL4
spdmem3 at mem0: 1GB DDR2 SDRAM non-parity PC2-4200CL4
memc0 at mainbus0: u4 rev 0x42
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
lmtemp0 at iic0 addr 0x4a: ds1775
maxds0 at iic0 addr 0x4b: ds1631
maxtmp0 at iic0 addr 0x4c: max6690
maxtmp1 at iic0 addr 0x4e: max6690
"dart" at memc0 offset 0xf8033000 not configured
openpic0 at memc0 offset 0xf8040000: version 0x4614 feature 7b0302 BE
mpcpcibr0 at mainbus0 pci: u4-pcie
pci0 at mpcpcibr0 bus 0
vgafb0 at pci0 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ht0 at mainbus0: u3-ht, 10 devices
pci1 at ht0 bus 0
hpb0 at pci1 dev 7 function 0 "Apple Shasta PCI" rev 0x00: 85 sources
pci2 at hpb0 bus 2
ppb0 at pci1 dev 1 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci3 at ppb0 bus 4
ppb1 at pci1 dev 2 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci4 at ppb1 bus 5
bge0 at pci4 dev 4 function 0 "Broadcom BCM5780" rev 0x03, BCM5714 B3 (0x8003):
irq 66, address 00:14:51:68:33:0e
brgphy0 at bge0 phy 1: BCM5780 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci4 dev 4 function 1 "Broadcom BCM5780" rev 0x03, BCM5714 B3 (0x8003):
irq 67, address 00:14:51:68:33:0f
brgphy1 at bge1 phy 1: BCM5780 10/100/1000baseT/SX PHY, rev. 0
ppb2 at pci1 dev 3 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci5 at ppb2 bus 6
ppb3 at pci1 dev 4 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci6 at ppb3 bus 7
ppb4 at pci1 dev 5 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci7 at ppb4 bus 8
ppb5 at pci1 dev 6 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci8 at ppb5 bus 9
ppb6 at pci1 dev 8 function 0 "Apple Shasta PCI" rev 0x00
pci9 at ppb6 bus 1
macobio0 at pci9 dev 7 function 0 "Apple Shasta" rev 0x00
macgpio0 at macobio0 offset 0x50
"smu-doorbell" at macgpio0 offset 0x12 not configured
"smu-interrupt" at macgpio0 offset 0xd not configured
"programmer-switch" at macgpio0 offset 0xc not configured
"chip-fault" at macgpio0 offset 0xe not configured
"slewing-done" at macgpio0 offset 0x38 not configured
"mlb-good" at macgpio0 offset 0x13 not configured
"vdnap0" at macgpio0 offset 0x14 not configured
"timebase-enable" at macgpio0 offset 0x26 not configured
"amp-mute" at macgpio0 offset 0x30 not configured
"dig-hw-reset-c" at macgpio0 offset 0x9 not configured
"codec-error-irq" at macgpio0 offset 0x32 not configured
"codec-clock-mux" at macgpio0 offset 0x31 not configured
"headphone-detect" at macgpio0 offset 0x2c not configured
"headphone-mute" at macgpio0 offset 0x2f not configured
"hw-reset" at macgpio0 offset 0xa not configured
"lineout-detect" at macgpio0 offset 0x28 not configured
"linein-detect" at macgpio0 offset 0x2a not configured
"lineout-mute" at macgpio0 offset 0x2e not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zs0 at macobio0 offset 0x13000: irq 23,24
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
"pcm3052" at iic1 addr 0x46 not configured
"cs8416" at iic1 addr 0x12 not configured
onyx0 at macobio0 offset 0x0: irq 28,11,12
"timer" at macobio0 offset 0x15000 not configured
audio0 at onyx0
ohci0 at pci9 dev 11 function 0 "NEC USB" rev 0x43: irq 70, version 1.0
ohci1 at pci9 dev 11 function 1 "NEC USB" rev 0x43: irq 70, version 1.0
ehci0 at pci9 dev 11 function 2 "NEC USB" rev 0x04: irq 70
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00
addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00
addr 1
ppb7 at pci1 dev 9 function 0 "Apple Shasta PCI" rev 0x00
pci10 at ppb7 bus 3
pciide0 at pci10 dev 12 function 0 "ServerWorks K2 SATA" rev 0x00: DMA
pciide0: using irq 10 for native-PCI interrupt
pciide0: port 0: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <WDC WD1600JS-41MVB1>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
pciide0: port 1: PHY offline
kauaiata0 at pci10 dev 13 function 0 "Apple Shasta ATA" rev 0x00
wdc0 at kauaiata0 irq 38: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RW GWA-4165B, C006> ATAPI 5/cdrom
removable
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
"Apple Shasta Firewire" rev 0x00 at pci10 dev 14 function 0 not configured
smu0 at mainbus0
iic2 at smu0
"smu-sat" at iic2 addr 0x58 not configured
"smu-pulsar" at iic2 addr 0x6a not configured
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Microdia / Sonix
Technology Co., Ltd. USB Keyboard" rev 2.00/1.06 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Microdia / Sonix
Technology Co., Ltd. USB Keyboard" rev 2.00/1.06 addr 2
uhidev1: iclass 3/1, 6 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=1, output=0, feature=0
ukbd1 at uhidev1 reportid 4: 48 variable keys, 0 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
ukbd2 at uhidev1 reportid 5: 56 variable keys, 0 key codes
wskbd2 at ukbd2 mux 1
wskbd2: connecting to wsdisplay0
ukbd3 at uhidev1 reportid 6: 56 variable keys, 0 key codes
wskbd3 at ukbd3 mux 1
wskbd3: connecting to wsdisplay0
uhidev2 at uhub2 port 2 configuration 1 interface 0 "Primax Electronics Apple
Optical USB Mouse" rev 1.10/1.10 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 4 buttons, Z and W dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /ht/pci@9/k2-sata-root/k2-sata@0/disk@0:/bsd
root on wd0a (03c5614775517f10.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
WARNING: unable to get date/time -- CHECK AND RESET THE DATE!
I have random problem with disk, several time appear messages like :
wd0a : device timeout writing fsbn ......number..... of .....number......
Never come back after that and sometime the cooler run more faster and server
hang.
I think I need to test boot or install with external disk to check if the
problem is with my sata cable , maybe sata driver. Normally if do several I/O
task the server crash in one hour but I uses normal without less I/O will work
fine but sometime crash.
And other issue is VIDEO, I want to use xorg with standard values,
I read /usr/X11R6/README, wsbf works for me.
vgafb0 at pci0 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2, mmio
I test my own xorg.conf and wsbf works but start in Depth 1 in monochrome
status.
Any suggestions to configure my box ¿?
Regards
---
Rondan Rino
[Certificado en LPIC-3 ](https://cs.lpi.org/caf/Xamman/certification)
LPI ID:LPI000209832
Verification Code:gbblvwyfxu
[Red Hat Certified Engineer -- RHCE --
RHCVA](https://www.redhat.com/rhtapps/certification/verify/?certId=120-175-658)
Phone:+1210 888 0738
Blog:[http://www.itrestauracion.com.ar](http://www.itrestauracion.com.ar/)
Cv:[ http://cv.rinorondan.com.ar](http://www.rinorondan.com.ar/)
[http://counter.li.org](http://counter.li.org/) Linux User -> #517918
Viva La Santa Federacion!!
Mueran Los Salvages Unitarios!!
^^^Transcripcion de la epoca ^^^
Sent from [ProtonMail](https://protonmail.ch), encrypted email based in
Switzerland.
