On Fri, Dec 09, 2016 at 11:02:09AM -0800, Bryan Vyhmeister wrote: > The only other issue is that one of the fans runs at full blast which > is fairly loud. If I remember correctly, I have seen work on the G5 > fans on src-changes@ but not sure if this machine was one that would > benefit from that work.
I made one silly mistake on the fans. The fan control is working perfectly. I had just forgotten to put the clear plastic air shroud back in after I switched my SSD to this system. Once I put the shroud back in, the fans slowed down and are working perfectly as can be seen from sysctl hw output below. Bryan hw.machine=macppc hw.model=970 (Revision 0x202) hw.ncpu=2 hw.byteorder=4321 hw.pagesize=4096 hw.disknames=cd0:,wd0:657a501240a85374 hw.diskcount=2 hw.sensors.lmtemp0.temp0=17.50 degC hw.sensors.maxtmp0.temp0=33.38 degC (Internal) hw.sensors.maxtmp0.temp1=45.50 degC (External) hw.sensors.maxtmp1.temp0=22.88 degC (Internal) hw.sensors.maxtmp1.temp1=16.50 degC (External) hw.sensors.fcu0.fan0=0 RPM hw.sensors.fcu0.fan1=999 RPM hw.sensors.fcu0.fan2=1000 RPM hw.sensors.fcu0.fan3=1000 RPM hw.sensors.fcu0.fan4=999 RPM hw.sensors.fcu0.fan5=1000 RPM hw.sensors.fcu0.percent0=26.67% (PWM) hw.sensors.fcu0.percent1=26.67% (PWM) hw.sensors.adc0.temp0=33.00 degC (Internal) hw.sensors.adc0.raw0=1023 hw.sensors.adc0.raw1=1023 hw.sensors.adc0.raw2=1023 hw.sensors.adc0.raw3=1023 hw.sensors.adc1.temp0=31.25 degC (Internal) hw.sensors.adc1.raw0=1023 hw.sensors.adc1.raw1=1023 hw.sensors.adc1.raw2=1023 hw.sensors.adc1.raw3=1023 hw.cpuspeed=1800 hw.vendor=Apple Computer, Inc. hw.product=PowerMac7,3 hw.physmem=805306368 hw.usermem=805294080 hw.ncpufound=2 hw.allowpowerdown=1
