On Sat, 15 Aug 2015, Donovan Watteau wrote:
> Hi,
>
> I saw some new PowerMac11,2 support in plus58.html. It mentions a
> Quad G5, while I have a Dual Core G5 (and an NVIDIA...), so here's
> what happens.
>
> I'm booting cd58.iso, with "boot cd:,ofwboot /5.8/macppc/bsd.rd" on
> OpenFirmware.
>
> However, it panics quickly, and the screen gets a bit corrupted
> (I have pictures if it helps, this one is copied by hand).
>
> Copyright (c) 1982, 1986, 1989, 1991, 19[corrupted]
> The Regents of the University of[corrupted]
> Copyright (c) 1995-2015 OpenBSD. All rig[corrupted]org
>
> OpenBSD 5.8 (RAMDISK) #644: Thu Aug 6 1[corrupted]
> dera...@macppc.openbsd.org:/usr/src/[corrupted]mpile/RAMDISK
> real mem = 3758096384 (3584MB)
> avail mem = 2019610624 (1926MB)
> mainbus0 at root: model PowerMac11,2
> cpu0 at mainbus0: 970MP (Revision 0x101)[corrupted] MHz
> cpu at mainbus0 not configured
> mem at mainbus0 not configured
> memc0 at mainbus0: u4 rev 0x42
> kiic0 at memc0 offset 0xf8001000
> iic0 at kiic0
> "ds1775" at iic0 addr 0x4a not configured
> [other corrupted line, but has similarities with the previous line]
> "max6690" at iic0 addr 0x4c not configured
> "max6690" at iic0 addr 0x4e not configured
> "dart" at memc0 offset 0xf8033000 not configured
> openpic0 at memc0 offset 0xf8040000: version 0x4614 feature 7b0302 BE
> mpcpcibr0 at mainbus0 pci: u4-pcie
> pci0 at mpcpcibr0 bus 0
> vgafb0 at pci0 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2, mmio
> vgafb0: aperture needed
> wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
> ht0 at mainbus0: u3-ht, 10 devices
> pci1 at ht0 bus0
> ppb0 at pci1 dev 1 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
> pci2 at ppb0 bus 4
> ppb1 at pci1 dev 2 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
> pci3 at ppb1 bus 5
> bge0 at pci3 dev 4 function 0 "Broadcom BCM5780" rev 0x03, BCM5714 B3
> (0x8003)panic: trap type 400 at 7000000 (0+0x7000000) lr 333dd8
> halted
> ok
> 0>
>
> Then it goes back to OpenFirmware and I can't type anything.
>
> I have another macppc I can use to compile kernels, if that helps.
>
> ...
I did some more testing, and it looks like this issue only shows
up with bsd.rd. bsd.mp works fine once the system is installed.
I had to disable bge(4) with "boot -c" in order to work around
this.
Here's bsd.rd dmesg, after disabling bge:
User Kernel Config
UKC> disable bge
76 bge* disabled
UKC> quit
Continuing...
console out [NVDA,Display-A] console in [keyboard], using USB
using parent NVDA,Parent:: memaddr 98000000, size 8000000 : consaddr 98020000 :
ioaddr 92000000, size 1000000: width 1920 linebytes 2048 height 1080 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8 (RAMDISK) #644: Thu Aug 6 13:59:43 MDT 2015
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/RAMDISK
real mem = 3758096384 (3584MB)
avail mem = 2019610624 (1926MB)
mainbus0 at root: model PowerMac11,2
cpu0 at mainbus0: 970MP (Revision 0x101): 2000 MHz
cpu at mainbus0 not configured
mem at mainbus0 not configured
memc0 at mainbus0: u4 rev 0x42
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
"ds1775" at iic0 addr 0x4a not configured
"ds1631" at iic0 addr 0x4b not configured
"max6690" at iic0 addr 0x4c not configured
"max6690" at iic0 addr 0x4e not configured
"dart" at memc0 offset 0xf8033000 not configured
openpic0 at memc0 offset 0xf8040000: version 0x4614 feature 7b0302 BE
mpcpcibr0 at mainbus0 pci: u4-pcie
pci0 at mpcpcibr0 bus 0
vgafb0 at pci0 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2, mmio
vgafb0: aperture needed
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
ht0 at mainbus0: u3-ht, 10 devices
pci1 at ht0 bus 0
ppb0 at pci1 dev 1 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci2 at ppb0 bus 4
ppb1 at pci1 dev 2 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci3 at ppb1 bus 5
"Broadcom BCM5780" rev 0x03 at pci3 dev 4 function 0 not configured
"Broadcom BCM5780" rev 0x03 at pci3 dev 4 function 1 not configured
ppb2 at pci1 dev 3 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci4 at ppb2 bus 6
ppb3 at pci1 dev 4 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci5 at ppb3 bus 7
ppb4 at pci1 dev 5 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci6 at ppb4 bus 8
ppb5 at pci1 dev 6 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci7 at ppb5 bus 9
hpb0 at pci1 dev 7 function 0 "Apple Shasta PCI" rev 0x00: 85 sources
pci8 at hpb0 bus 2
ppb6 at pci1 dev 8 function 0 "Apple Shasta PCI" rev 0x00
pci9 at ppb6 bus 1
macobio0 at pci9 dev 7 function 0 "Apple Shasta" rev 0x00
macgpio0 at macobio0 offset 0x50
"smu-doorbell" at macgpio0 offset 0x12 not configured
"smu-interrupt" at macgpio0 offset 0xd not configured
"programmer-switch" at macgpio0 offset 0xc not configured
"chip-fault" at macgpio0 offset 0xe not configured
"slewing-done" at macgpio0 offset 0x38 not configured
"mlb-good" at macgpio0 offset 0x13 not configured
"vdnap0" at macgpio0 offset 0x14 not configured
"timebase-enable" at macgpio0 offset 0x26 not configured
"amp-mute" at macgpio0 offset 0x30 not configured
"dig-hw-reset-c" at macgpio0 offset 0x9 not configured
"codec-error-irq" at macgpio0 offset 0x32 not configured
"codec-clock-mux" at macgpio0 offset 0x31 not configured
"headphone-detect" at macgpio0 offset 0x2c not configured
"headphone-mute" at macgpio0 offset 0x2f not configured
"hw-reset" at macgpio0 offset 0xa not configured
"lineout-detect" at macgpio0 offset 0x28 not configured
"linein-detect" at macgpio0 offset 0x2a not configured
"lineout-mute" at macgpio0 offset 0x2e not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 23,24
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
"i2c" at macobio0 offset 0x18000 not configured
"i2s" at macobio0 offset 0x0 not configured
"timer" at macobio0 offset 0x15000 not configured
ohci0 at pci9 dev 11 function 0 "NEC USB" rev 0x43: irq 70, version 1.0
ohci1 at pci9 dev 11 function 1 "NEC USB" rev 0x43: irq 70, version 1.0
ehci0 at pci9 dev 11 function 2 "NEC USB" rev 0x04: irq 70
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ppb7 at pci1 dev 9 function 0 "Apple Shasta PCI" rev 0x00
pci10 at ppb7 bus 3
pciide0 at pci10 dev 12 function 0 "ServerWorks K2 SATA" rev 0x00: DMA
pciide0: using irq 10 for native-PCI interrupt
pciide0: port 0: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <HDS722516VLSA80>
wd0: 16-sector PIO, LBA48, 157066MB, 321672960 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: port 1: PHY offline
kauaiata0 at pci10 dev 13 function 0 "Apple Shasta ATA" rev 0x00
wdc0 at kauaiata0 irq 38: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RW GWA-4165B, C006> ATAPI 5/cdrom
removable
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
"Apple Shasta Firewire" rev 0x00 at pci10 dev 14 function 0 not configured
smu0 at mainbus0
uhidev0 at uhub1 port 2 configuration 1 interface 0 "vendor 0x04f3 product
0x0103" rev 1.10/1.07 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "vendor 0x04f3 product
0x0103" rev 1.10/1.07 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
softraid0 at root
scsibus1 at softraid0: 256 targets
bootpath: /ht/pci@9/ata-6/disk@0:/5.8/macppc/bsd.rd
root on rd0a swap on rd0b dump on rd0b
WARNING: unable to get date/time -- CHECK AND RESET THE DATE!
And here's bsd.mp dmesg:
[ using 551356 bytes of bsd ELF symbol table ]
console out [NVDA,Display-A] console in [keyboard], using USB
using parent NVDA,Parent:: memaddr 98000000, size 8000000 : consaddr 98020000 :
ioaddr 92000000, size 1000000: width 1920 linebytes 2048 height 1080 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8 (GENERIC.MP) #728: Sun Aug 16 05:05:32 MDT 2015
dera...@macppc.openbsd.org:/usr/src/sys/arch/macppc/compile/GENERIC.MP
real mem = 3758096384 (3584MB)
avail mem = 2019983360 (1926MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac11,2
cpu0 at mainbus0: 970MP (Revision 0x101): 2000 MHz
cpu1 at mainbus0: 970MP (Revision 0x101): 2000 MHz
mem0 at mainbus0
spdmem0 at mem0: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at mem0: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem2 at mem0: 512MB DDR2 SDRAM non-parity PC2-4200CL5
spdmem3 at mem0: 512MB DDR2 SDRAM non-parity PC2-4200CL5
spdmem4 at mem0: 256MB DDR2 SDRAM non-parity PC2-4200CL4
spdmem5 at mem0: 256MB DDR2 SDRAM non-parity PC2-4200CL4
memc0 at mainbus0: u4 rev 0x42
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
lmtemp0 at iic0 addr 0x4a: ds1775
maxds0 at iic0 addr 0x4b: ds1631
maxtmp0 at iic0 addr 0x4c: max6690
maxtmp1 at iic0 addr 0x4e: max6690
"dart" at memc0 offset 0xf8033000 not configured
openpic0 at memc0 offset 0xf8040000: version 0x4614 feature 7b0302 BE
mpcpcibr0 at mainbus0 pci: u4-pcie
pci0 at mpcpcibr0 bus 0
vgafb0 at pci0 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ht0 at mainbus0: u3-ht, 10 devices
pci1 at ht0 bus 0
ppb0 at pci1 dev 1 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci2 at ppb0 bus 4
ppb1 at pci1 dev 2 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci3 at ppb1 bus 5
bge0 at pci3 dev 4 function 0 "Broadcom BCM5780" rev 0x03, BCM5714 B3 (0x8003):
irq 66, address XXX
brgphy0 at bge0 phy 1: BCM5780 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci3 dev 4 function 1 "Broadcom BCM5780" rev 0x03, BCM5714 B3 (0x8003):
irq 67, address XXX
brgphy1 at bge1 phy 1: BCM5780 10/100/1000baseT/SX PHY, rev. 0
ppb2 at pci1 dev 3 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci4 at ppb2 bus 6
ppb3 at pci1 dev 4 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci5 at ppb3 bus 7
ppb4 at pci1 dev 5 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci6 at ppb4 bus 8
ppb5 at pci1 dev 6 function 0 "ServerWorks HT-2000 PCIE" rev 0xa3
pci7 at ppb5 bus 9
hpb0 at pci1 dev 7 function 0 "Apple Shasta PCI" rev 0x00: 85 sources
pci8 at hpb0 bus 2
ppb6 at pci1 dev 8 function 0 "Apple Shasta PCI" rev 0x00
pci9 at ppb6 bus 1
macobio0 at pci9 dev 7 function 0 "Apple Shasta" rev 0x00
macgpio0 at macobio0 offset 0x50
"smu-doorbell" at macgpio0 offset 0x12 not configured
"smu-interrupt" at macgpio0 offset 0xd not configured
"programmer-switch" at macgpio0 offset 0xc not configured
"chip-fault" at macgpio0 offset 0xe not configured
"slewing-done" at macgpio0 offset 0x38 not configured
"mlb-good" at macgpio0 offset 0x13 not configured
"vdnap0" at macgpio0 offset 0x14 not configured
"timebase-enable" at macgpio0 offset 0x26 not configured
"amp-mute" at macgpio0 offset 0x30 not configured
"dig-hw-reset-c" at macgpio0 offset 0x9 not configured
"codec-error-irq" at macgpio0 offset 0x32 not configured
"codec-clock-mux" at macgpio0 offset 0x31 not configured
"headphone-detect" at macgpio0 offset 0x2c not configured
"headphone-mute" at macgpio0 offset 0x2f not configured
"hw-reset" at macgpio0 offset 0xa not configured
"lineout-detect" at macgpio0 offset 0x28 not configured
"linein-detect" at macgpio0 offset 0x2a not configured
"lineout-mute" at macgpio0 offset 0x2e not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 23,24
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
"pcm3052" at iic1 addr 0x46 not configured
"cs8416" at iic1 addr 0x12 not configured
onyx0 at macobio0 offset 0x0: irq 28,11,12
"timer" at macobio0 offset 0x15000 not configured
audio0 at onyx0
ohci0 at pci9 dev 11 function 0 "NEC USB" rev 0x43: irq 70, version 1.0
ohci1 at pci9 dev 11 function 1 "NEC USB" rev 0x43: irq 70, version 1.0
ehci0 at pci9 dev 11 function 2 "NEC USB" rev 0x04: irq 70
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
ppb7 at pci1 dev 9 function 0 "Apple Shasta PCI" rev 0x00
pci10 at ppb7 bus 3
pciide0 at pci10 dev 12 function 0 "ServerWorks K2 SATA" rev 0x00: DMA
pciide0: using irq 10 for native-PCI interrupt
pciide0: port 0: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <HDS722516VLSA80>
wd0: 16-sector PIO, LBA48, 157066MB, 321672960 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: port 1: PHY offline
kauaiata0 at pci10 dev 13 function 0 "Apple Shasta ATA" rev 0x00
wdc0 at kauaiata0 irq 38: DMA
atapiscsi0 at wdc0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-RW GWA-4165B, C006> ATAPI 5/cdrom
removable
cd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
"Apple Shasta Firewire" rev 0x00 at pci10 dev 14 function 0 not configured
smu0 at mainbus0
iic2 at smu0
"smu-sat" at iic2 addr 0x58 not configured
"smu-pulsar" at iic2 addr 0x6a not configured
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Elan product 0x0103" rev
1.10/1.07 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Elan product 0x0103" rev
1.10/1.07 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /ht/pci@9/k2-sata-root/k2-sata@0/disk@0:/bsd
root on wd0a (a1631327f82d6e92.a) swap on wd0b dump on wd0b
WARNING: unable to get date/time -- CHECK AND RESET THE DATE!
Except for this bsd.rd bug, it works great (well, X doesn't like the
NVIDIA videocard, but I'll find an ATI). Thanks to Martin and whoever
helped making this possible.
