Hi,
I saw some new PowerMac11,2 support in plus58.html. It mentions a
Quad G5, while I have a Dual Core G5 (and an NVIDIA...), so here's
what happens.
I'm booting cd58.iso, with "boot cd:,ofwboot /5.8/macppc/bsd.rd" on
OpenFirmware.
However, it panics quickly, and the screen gets a bit corrupted
(I have pictures if it helps, this one is copied by hand).
Copyright (c) 1982, 1986, 1989, 1991, 19[corrupted]
The Regents of the University of[corrupted]
Copyright (c) 1995-2015 OpenBSD. All rig[corrupted]org
OpenBSD 5.8 (RAMDISK) #644: Thu Aug 6 1[corrupted]
dera...@macppc.openbsd.org:/usr/src/[corrupted]mpile/RAMDISK
real mem = 3758096384 (3584MB)
avail mem = 2019610624 (1926MB)
mainbus0 at root: model PowerMac11,2
cpu0 at mainbus0: 970MP (Revision 0x101)[corrupted] MHz
cpu at mainbus0 not configured
mem at mainbus0 not configured
memc0 at mainbus0: u4 rev 0x42
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
"ds1775" at iic0 addr 0x4a not configured
[other corrupted line, but has similarities with the previous line]
"max6690" at iic0 addr 0x4c not configured
"max6690" at iic0 addr 0x4e not configured
"dart" at memc0 offset 0xf8033000 not configured
openpic0 at memc0 offset 0xf8040000: version 0x4614 feature 7b0302 BE
mpcpcibr0 at mainbus0 pci: u4-pcie
pci0 at mpcpcibr0 bus 0
vgafb0 at pci0 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2, mmio
vgafb0: aperture needed
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
ht0 at mainbus0: u3-ht, 10 devices
pci1 at ht0 bus0
ppb0 at pci1 dev 1 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci2 at ppb0 bus 4
ppb1 at pci1 dev 2 function 0 "ServerWorks HT-2000 PCIX" rev 0xa3
pci3 at ppb1 bus 5
bge0 at pci3 dev 4 function 0 "Broadcom BCM5780" rev 0x03, BCM5714 B3
(0x8003)panic: trap type 400 at 7000000 (0+0x7000000) lr 333dd8
halted
ok
0>
Then it goes back to OpenFirmware and I can't type anything.
I have another macppc I can use to compile kernels, if that helps.
Since I can't get a full dmesg from OpenBSD, here's some info from
Linux 4.0.0. Thanks.
$ dmesg
Allocated 131072 bytes for 32 pacas at c00000000ffe0000
DART table allocated at: c00000007f000000
Using PowerMac machine description
Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
cma: Reserved 192 MiB at 0x0000000150000000
Found initrd at 0xc000000001b00000:0xc000000002c4e000
Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42
Mapped at 0xd000080080000000
Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080050000
PowerMac motherboard: PowerMac G5 Dual Core
DART IOMMU initialized for U4 type chipset
bootconsole [udbg0] enabled
CPU maps initialized for 1 thread per core
(thread shift is 0)
Freed 65536 bytes for unused pacas
Starting Linux PPC64 #1 SMP Debian 4.0.4-1 (2015-05-26)
-----------------------------------------------------
ppc64_pft_size = 0x0
phys_mem_size = 0xe0000000
cpu_features = 0x0804806318100448
possible = 0x1fffffef18500649
always = 0x0000000018100040
cpu_user_features = 0xdc080000 0x00000000
mmu_features = 0x0c000001
firmware_features = 0x0000000000000000
htab_address = 0xc00000015c000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.0.0-2-powerpc64 (debian-ker...@lists.debian.org) (gcc version
4.9.2 (Debian 4.9.2-18) ) #1 SMP Debian 4.0.4-1 (2015-05-26)
Top of RAM: 0x160000000, Total RAM: 0xe0000000
Memory hole size: 2048MB
numa: Initmem setup node 0 [mem 0x00000000-0x15fffffff]
numa: NODE_DATA [mem 0x14ffbc000-0x14ffc6fff]
Found U4-PCIE PCI host bridge. Firmware bus number: 0->255
PCI host bridge /pci@0,f0000000 ranges:
MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI host bridge /ht@0,f2000000 (primary) ranges:
SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp.
nvram: Checking bank 0...
nvram: gen0=598, gen1=599
nvram: Active bank is: 1
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Top of RAM: 0x160000000, Total RAM: 0xe0000000
Memory hole size: 2048MB
Zone ranges:
DMA [mem 0x0000000000000000-0x000000015fffffff]
DMA32 empty
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000007fffffff]
node 0: [mem 0x0000000100000000-0x000000015fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000015fffffff]
On node 0 totalpages: 57344
DMA zone: 56 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 57344 pages, LIFO batch:1
PERCPU: Embedded 3 pages/cpu @c00000014fe00000 s118040 r0 d78568 u524288
pcpu-alloc: s118040 r0 d78568 u524288 alloc=1*1048576
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 57288
Policy zone: DMA
Kernel command line: root=/dev/sda3 ro nomodeset
PID hash table entries: 4096 (order: -1, 32768 bytes)
Sorting __ex_table...
Memory: 3341376K/3670016K available (7616K kernel code, 1728K rwdata, 1948K
rodata, 960K init, 2071K bss, 132032K reserved, 196608K cma-reserved)
Hierarchical RCU implementation.
CONFIG_RCU_FANOUT set to non-default value of 32
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:512 nr_irqs:512 16
mpic: Resetting
mpic: Setting up MPIC " MPIC 1 " version 1.2 at f8040000, max 2 CPUs
mpic: ISU size: 124, shift: 7, mask: 7f
mpic: Initializing for 124 sources
mpic: Setting up HT PICs workarounds for U3/U4
mpic: - HT:01.0 disabled MSI mapping found @ 0xfee00000
mpic: - HT:02.0 disabled MSI mapping found @ 0xfee00000
mpic: - HT:03.0 disabled MSI mapping found @ 0xfee00000
mpic: - HT:04.0 disabled MSI mapping found @ 0xfee00000
mpic: - HT:05.0 disabled MSI mapping found @ 0xfee00000
mpic: - HT:06.0 disabled MSI mapping found @ 0xfee00000
mpic: - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency = 2000.000000 MHz
clocksource: timebase mult[1e000005] shift[24] registered
clockevent: decrementer mult[8888887] shift[32] cpu[0]
Console: colour dummy device 80x25
console [tty0] enabled
bootconsole [udbg0] disabled
mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing=
or the kernel.numa_balancing sysctl
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 0, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
ftrace: allocating 20935 entries in 8 pages
PowerMac SMP probe found 2 cpus
KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000
channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1
KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000
channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
SMU i2c /smu@0,0/smu-i2c-control@0
channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b
channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e
Processor timebase sync using platform function
mpic: requesting IPIs...
PPC970/FX/MP performance monitor hardware support registered
Brought up 2 CPUs
devtmpfs: initialized
EEH: devices created
device-tree: Duplicate name in i2c@18000, renamed to "i2c-bus@0#1"
NET: Registered protocol family 16
eeh_init: Platform EEH operation not found
IBM eBus Device Driver
cpuidle: using governor ladder
cpuidle: using governor menu
PCI: Probing PCI hardware
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x10000-0x80ffff] (bus address
[0x0000-0x7fffff])
pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400
PCI: Fixup U4 PCIe bridge range: [mem 0x90000000-0x9fffffff]
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
IOMMU table initialized, virtual merging enabled
pci 0000:0a:00.0: [10de:0142] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0x92000000-0x92ffffff]
pci 0000:0a:00.0: reg 0x14: [mem 0x98000000-0x9fffffff 64bit pref]
pci 0000:0a:00.0: reg 0x1c: [mem 0x91000000-0x91ffffff 64bit]
pci 0000:0a:00.0: reg 0x30: [mem 0x90000000-0x9001ffff pref]
pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it
with 'pcie_aspm=force'
pci 0000:00:0b.0: PCI bridge to [bus 0a]
pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff]
pci 0000:00:0b.0: bridge window [mem 0x90000000-0x9fffffff]
pci 0000:00:0b.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0a
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [io 0x820000-0xc1ffff] (bus address
[0x0000-0x3fffff])
pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff]
pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
pci_bus 0001:00: root bus resource [mem 0xa0000000-0xefffffff]
pci_bus 0001:00: root bus resource [bus 00-ef]
pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff
pci 0001:00:00.0: [106b:0074] type 00 class 0x060000
pci 0001:00:01.0: [1166:0130] type 01 class 0x060400
pci 0001:00:02.0: [1166:0130] type 01 class 0x060400
pci 0001:00:03.0: [1166:0132] type 01 class 0x060400
pci 0001:00:04.0: [1166:0132] type 01 class 0x060400
pci 0001:00:05.0: [1166:0132] type 01 class 0x060400
pci 0001:00:06.0: [1166:0132] type 01 class 0x060400
pci 0001:00:07.0: [106b:0053] type 01 class 0x060400
pci 0001:00:08.0: [106b:0054] type 01 class 0x060400
pci 0001:00:09.0: [106b:0055] type 01 class 0x060400
pci 0001:00:01.0: PCI bridge to [bus 04]
pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000
pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff 64bit]
pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff 64bit]
pci 0001:05:04.0: PME# supported from D3hot D3cold
pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000
pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff 64bit]
pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff 64bit]
pci 0001:05:04.1: PME# supported from D3hot D3cold
pci 0001:00:02.0: PCI bridge to [bus 05]
pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff]
pci 0001:00:03.0: PCI bridge to [bus 06]
pci 0001:00:04.0: PCI bridge to [bus 07]
pci 0001:00:05.0: PCI bridge to [bus 08]
pci 0001:00:06.0: PCI bridge to [bus 09]
pci 0001:00:07.0: PCI bridge to [bus 02]
pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff]
pci 0001:00:07.0: bridge window [mem 0x00000000-0x000fffff pref]
pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000
pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff]
pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310
pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff]
pci 0001:01:0b.0: supports D1 D2
pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310
pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff]
pci 0001:01:0b.1: supports D1 D2
pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320
pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff]
pci 0001:01:0b.2: supports D1 D2
pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0001:00:08.0: PCI bridge to [bus 01]
pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff]
pci 0001:00:08.0: bridge window [mem 0x00000000-0x000fffff pref]
pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f
pci 0001:03:0c.0: reg 0x10: [io 0x820000-0x820007]
pci 0001:03:0c.0: reg 0x14: [io 0x820000-0x820003]
pci 0001:03:0c.0: reg 0x18: [io 0x820000-0x820007]
pci 0001:03:0c.0: reg 0x1c: [io 0x820000-0x820003]
pci 0001:03:0c.0: reg 0x20: [io 0x820000-0x82000f]
pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff]
pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000
pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff]
pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010
pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff]
pci 0001:03:0e.0: supports D1 D2
pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0001:00:09.0: PCI bridge to [bus 03]
pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff]
pci 0001:00:09.0: bridge window [mem 0x00000000-0x000fffff pref]
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 09
PCI 0000:00 Cannot reserve Legacy IO [io 0x10000-0x10fff]
pci 0000:00:0b.0: BAR 15: assigned [mem 0xf1000000-0xf10fffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 0a]
pci 0000:00:0b.0: bridge window [io 0x10000-0x1ffff]
pci 0000:00:0b.0: bridge window [mem 0x90000000-0x9fffffff]
pci 0000:00:0b.0: bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x10000-0x80ffff]
pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff]
pci_bus 0000:0a: resource 0 [io 0x10000-0x1ffff]
pci_bus 0000:0a: resource 1 [mem 0x90000000-0x9fffffff]
pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref]
pci 0001:00:01.0: PCI bridge to [bus 04]
pci 0001:00:02.0: PCI bridge to [bus 05]
pci 0001:00:02.0: bridge window [mem 0xfa500000-0xfa5fffff]
pci 0001:00:03.0: PCI bridge to [bus 06]
pci 0001:00:04.0: PCI bridge to [bus 07]
pci 0001:00:05.0: PCI bridge to [bus 08]
pci 0001:00:06.0: PCI bridge to [bus 09]
pci 0001:00:07.0: PCI bridge to [bus 02]
pci 0001:00:07.0: bridge window [mem 0xfa000000-0xfa3fffff]
pci 0001:00:08.0: PCI bridge to [bus 01]
pci 0001:00:08.0: bridge window [mem 0x80000000-0x800fffff]
pci 0001:00:09.0: PCI bridge to [bus 03]
pci 0001:00:09.0: bridge window [mem 0xfa400000-0xfa4fffff]
pci_bus 0001:00: resource 4 [io 0x820000-0xc1ffff]
pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff]
pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
pci_bus 0001:00: resource 7 [mem 0xa0000000-0xefffffff]
pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff]
pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff]
pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff]
PCI: Probing PCI hardware done
vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0a:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
Switched to clocksource timebase
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 2, 262144 bytes)
TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 0, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (32 != 64), using 128 bytes
pci 0001:00:03.0: Found enabled HT MSI Mapping
pci 0001:00:04.0: Found enabled HT MSI Mapping
pci 0001:00:05.0: Found enabled HT MSI Mapping
pci 0001:00:06.0: Found enabled HT MSI Mapping
pci 0001:01:0b.0: enabling device (0000 -> 0002)
pci 0001:01:0b.1: enabling device (0000 -> 0002)
pci 0001:01:0b.2: enabling device (0004 -> 0006)
Unpacking initramfs...
Freeing initrd memory: 17664K (c000000001b00000 - c000000002c40000)
Hypercall H_BEST_ENERGY not supported
futex hash table entries: 512 (order: 0, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1439622791.967:1): initialized
HugeTLB registered 16 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Using unsupported 1920x1080 NVDA,Display-A at 98020000, depth=8, pitch=2048
Console: switching to colour frame buffer device 240x67
fb0: Open Firmware frame buffer device on
/pci@0,f0000000/NVDA,Parent@0/NVDA,Display-A@0
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
pmac_zilog: 0.6 (Benjamin Herrenschmidt <b...@kernel.crashing.org>)
Linux agpgart interface v0.103
MacIO PCI driver attached to Shasta chipset
0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 23, base_baud = 230400) is a
Z85c30 ESCC - Serial port
0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 24, base_baud = 230400) is a
Z85c30 ESCC - Serial port
pata-pci-macio 0001:03:0d.0: enabling device (0004 -> 0006)
pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple
bus ID 3
scsi host0: pata_macio
ata1: PATA max UDMA/133 irq 38
mousedev: PS/2 mouse device common for all mice
rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
PowerMac i2c bus smu 14 registered
PowerMac i2c bus smu 11 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus mac-io 0 registered
PowerMac i2c bus u4 1 registered
Registering G5 CPU frequency driver
Frequency method: SCOM, Voltage method: GPIO
Low: 1000 Mhz, High: 2000 Mhz, Cur: 2000 MHz
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
PM: Registered nosave memory: [mem 0x7f000000-0x7fffffff]
registered taskstats version 1
rtc-generic rtc-generic: setting system clock to 2015-08-15 07:13:12 UTC
(1439622792)
PM: Hibernation image not present or could not be loaded.
ata1.00: ATAPI: HL-DT-ST DVD-RW GWA-4165B, C006, max UDMA/66
ata1.00: configured for UDMA/66
blk_queue_max_segment_size: set to minimum 65536
scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4165B C006 PQ: 0 ANSI: 5
ata1.00: K2/Shasta alignment limits applied
Freeing unused kernel memory: 960K (c000000000960000 - c000000000a50000)
random: systemd-udevd urandom read with 7 bits of entropy available
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<giome...@linux.it>
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
sata_svw 0001:03:0c.0: version 2.3
sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0001:01:0b.2: EHCI Host Controller
ehci-pci 0001:01:0b.2: new USB bus registered, assigned bus number 1
ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000
ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.0.0-2-powerpc64 ehci_hcd
usb usb1: SerialNumber: 0001:01:0b.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0001:01:0b.0: OHCI PCI host controller
ohci-pci 0001:01:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.0.0-2-powerpc64 ohci_hcd
usb usb2: SerialNumber: 0001:01:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci-pci 0001:01:0b.1: OHCI PCI host controller
ohci-pci 0001:01:0b.1: new USB bus registered, assigned bus number 3
ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000
windfarm: initializing for dual-core desktop G5
scsi host1: sata_svw
scsi host2: sata_svw
scsi host3: sata_svw
scsi host4: sata_svw
ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 18
ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 18
ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 18
ata5: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 18
firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
sr 0:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.0.0-2-powerpc64 ohci_hcd
usb usb3: SerialNumber: 0001:01:0b.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT
contexts, quirks 0x0
windfarm: CPUs control loops started.
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
tg3 0001:05:04.0: Using 32-bit DMA via iommu
tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit)
MAC address XXX
tg3 0001:05:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet)
(WireSpeed[1], EEE[0])
tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0001:05:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit]
usb 2-2: new low-speed USB device number 2 using ohci-pci
ata2.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
tg3 0001:05:04.1: Using 32-bit DMA via iommu
tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit)
MAC address XXX
tg3 0001:05:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet)
(WireSpeed[1], EEE[0])
tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0001:05:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit]
ata2.00: 321672960 sectors, multi 16: LBA48
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA HDS722516VLSA80 A6MA PQ: 0 ANSI: 5
firewire_core 0001:03:0e.0: created device fw0: GUID 001451fffe365d86, S800
firewire_core 0001:03:0e.0: phy config: new root=ffc1, gap_count=5
usb 2-2: New USB device found, idVendor=04f3, idProduct=0103
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 04f3:0103 as
/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.0/0003:04F3:0103.0001/input/input0
hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID
04f3:0103] on usb-0001:01:0b.0-2/input0
input: HID 04f3:0103 as
/devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-2/2-2:1.1/0003:04F3:0103.0002/input/input1
ata3: SATA link down (SStatus 4 SControl 300)
hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID
04f3:0103] on usb-0001:01:0b.0-2/input1
sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 3a 0 20 0 0 0 7 89 37 0 a0 0 0
sat 0 partition c4: c4 4 1 7f e6 e 80 b2 ff 55 5c 11 cd 10 0 0
ata4: failed to resume link (SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 3a 0 20 0 0 0 7 89 37 0 a0 0 0
ata5: failed to resume link (SControl 0)
ata5: SATA link down (SStatus 0 SControl 0)
sd 1:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7
sd 1:0:0:0: [sda] Attached SCSI disk
sat 0 partition c5: c5 4 1 7f e6 e 80 b2 ff 55 7b 12 cd 10 0 0
windfarm: Backside control loop started.
windfarm: Slots control loop started.
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
windfarm: Drive bay control loop started.
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Inserted module 'autofs4'
random: nonblocking pool is initialized
systemd[1]: systemd 220 running in system mode. (+PAM +AUDIT +SELINUX +IMA
+APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4
-SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture ppc64.
systemd[1]: Set hostname to <debppc>.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting fsck to fsckd communication Socket.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the
current kernel...
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System
Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount
Point.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
lp: driver loaded but no devices found
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
loop: module loaded
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nodes for the current
kernel.
systemd[1]: Started Increase datagram queue length.
snd-aoa-codec-onyx: created and attached onyx instance
snd-aoa-codec-onyx: created and attached onyx instance
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create Static Device Nodes in /dev...
snd-aoa-fabric-layout: Using PMF GPIOs
snd-aoa-fabric-layout: can use this codec
snd-aoa-codec-onyx: attached to onyx codec via i2c
snd-aoa-fabric-layout: platform-onyx-codec-ref doesn't match!
snd-aoa: fabric didn't like codec onyx
systemd[1]: systemd-modules-load.service: Main process exited, code=exited,
status=1/FAILURE
systemd[1]: Failed to start Load Kernel Modules.
systemd[1]: systemd-modules-load.service: Unit entered failed state.
systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
systemd-journald[182]: Received request to flush runtime journal from PID 1
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
Unable to find swap-space signature
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
errors=remount-ro
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
u3msi: allocated virq 0x20 (hw 0x8) addr 0xfee00000
u3msi: allocated virq 0x21 (hw 0x9) addr 0xfee00000
tg3 0001:05:04.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0001:05:04.0 eth0: Flow control is off for TX and off for RX
$ lspci
0000:00:0b.0 PCI bridge: Apple Inc. CPC945 PCIe Bridge
0000:0a:00.0 VGA compatible controller: NVIDIA Corporation NV43 [GeForce 6600
LE] (rev a2)
0001:00:00.0 Host bridge: Apple Inc. U4 HT Bridge
0001:00:01.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3)
0001:00:02.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-X bridge (rev a3)
0001:00:03.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3)
0001:00:04.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3)
0001:00:05.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3)
0001:00:06.0 PCI bridge: Broadcom BCM5780 [HT2000] PCI-Express Bridge (rev a3)
0001:00:07.0 PCI bridge: Apple Inc. Shasta PCI Bridge
0001:00:08.0 PCI bridge: Apple Inc. Shasta PCI Bridge
0001:00:09.0 PCI bridge: Apple Inc. Shasta PCI Bridge
0001:01:07.0 Unassigned class [ff00]: Apple Inc. Shasta Mac I/O
0001:01:0b.0 USB controller: NEC Corporation OHCI USB Controller (rev 43)
0001:01:0b.1 USB controller: NEC Corporation OHCI USB Controller (rev 43)
0001:01:0b.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev
04)
0001:03:0c.0 IDE interface: Broadcom K2 SATA
0001:03:0d.0 Unassigned class [ff00]: Apple Inc. Shasta IDE
0001:03:0e.0 FireWire (IEEE 1394): Apple Inc. Shasta Firewire
0001:05:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780
Gigabit Ethernet (rev 03)
0001:05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780
Gigabit Ethernet (rev 03)
$ cat /proc/cpuinfo
processor : 0
cpu : PPC970MP, altivec supported
clock : 2000.000000MHz
revision : 1.1 (pvr 0044 0101)
processor : 1
cpu : PPC970MP, altivec supported
clock : 2000.000000MHz
revision : 1.1 (pvr 0044 0101)
timebase : 33333333
platform : PowerMac
model : PowerMac11,2
machine : PowerMac11,2
motherboard : PowerMac11,2 MacRISC4 Power Macintosh
detected as : 337 (PowerMac G5 Dual Core)
pmac flags : 00000000
L2 cache : 1024K unified
pmac-generation : NewWorld
