On Mon, Apr 29, 2013 at 09:48:00AM +0200, Marko Weber | ZBF wrote: > Am 2013-04-24 15:59, schrieb Tony Nelson: > >After reading through the recent Postscreen DNSBL threads I decided > >to give it a try. > > > >I used Rob's example from http://rob0.nodns4.us/postscreen.html [1] > >as a leaping off point, but chose to leave pipelining disabled until > >I'm sure I understand what I have going on. snip
> in robs config example, have you SEEN this: Hahaha, no, Tony had not seen that, because those were warnings I added because of his feedback. :) > ### Postscreen Howto and *UNDERSTAND* it *BEFORE* you enable the > ### following tests! > postscreen_bare_newline_action = enforce > postscreen_bare_newline_enable = yes > postscreen_non_smtp_command_enable = yes > postscreen_pipelining_enable = yes > ### ADDENDUM: Any one of the foregoing three *_enable settings may > cause > ### significant and annoying mail delays. > > > READ the postscreen howto, and understand what happens. > i would not recommend you to enable this. -- http://rob0.nodns4.us/ -- system administration and consulting Offlist GMX mail is seen only if "/dev/rob0" is in the Subject:
