On Jul 29, 2010, at 9:33 AM, Wietse Venema wrote: > donovan jeffrey j: >> >> On Jul 29, 2010, at 7:16 AM, Wietse Venema wrote: >> >>> The simplest way to upgrade an existing configuration is: >>> >>> - Back up the new main.cf, master.cf, postfix-files, postfix-script >>> and post-install files. >>> >>> - Install the old main.cf and old master.cf and any files that >>> you have added to the old Postfix setup. >>> >>> - DO NOT INSTALL THE OLD POSTFIX-FILES, POSTFIX-SCRIPT AND POST-INSTALL >>> FILES. You must use the new versions of those files. >>> >>> - Execute (as root): "postfix upgrade-configuration". This will >>> update the old main.cf and old master.cf files and add missing >>> entries that Postfix needs. >>> >>> This procedure assumes that your vendor did not break "postfix >>> upgrade-configuration" or any of the files that it depends on. >>> >>> Wietse >> >> thanks Wietse >> >> these two systems have different mailbox_transports >> mailbox_transport = dovecot >> mailbox_transport = cyrus >> >> is it as simple as switching these two ? or are there any other >> considerations. > > You'll also need to configure the receiving end (dovecot or cyrus).
for right now, there are no users on this server. there willl only be a junkmail/nojunkmail folder. all mailboxes are on other servers i have an external relay at server.mydomain:2525 pickingup and delivering this system i want dedicated to filtering content. > >> i have also needed to change the user and group info >> >> mail_owner = postfix to mail_owner = _postfix >> setgid_group = postdrop to setgid_group = _postdrop > > My procedure above is for upgrading an existing setup when there > are no other changes. > > If the new system has different usernames or pathnames etc. then > you'll need to put that into the new Postfix configuration. > > Wietse thanks for the reply, i did the update and have no errors on postfix check. i have setup a test on my mx server to transport mail for lukeskywal...@beth.k12.pa.us to mx2.beth.k12.pa.us ( my new 10.6 filter ) so far my mail2 primary mx can send to the filter (mx2). Mx2 ;postfix picks up and sends to amavis. then I get some 554 error,.. im not sure who is complaining. Jul 29 10:20:08 mx2 postfix/smtpd[63722]: connect from mail2.beth.k12.pa.us[192.227.0.10] Jul 29 10:20:08 mx2 postfix/smtpd[63722]: 15B7551C06DA: client=mail2.beth.k12.pa.us[192.227.0.10] Jul 29 10:20:08 mx2 postfix/cleanup[63726]: 15B7551C06DA: message-id=<0d766f25-ec81-452b-9f77-f4c2a0ce2...@gmail.com> Jul 29 10:20:08 mx2 postfix/qmgr[63217]: 15B7551C06DA: from=<doctorf...@gmail.com>, size=2231, nrcpt=1 (queue active) Jul 29 10:20:11 mx2 postfix/smtp[63727]: 15B7551C06DA: to=<lukeskywal...@beth.k12.pa.us>, relay=127.0.0.1[127.0.0.1]:10024, delay=3.4, delays=0.01/0.01/0.01/3.3, dsn=5.1.0, status=bounced (host 127.0.0.1[127.0.0.1] said: 554 5.1.0 Failed, id=63219-01, from MTA([smtp.beth.k12.pa.us]:2525): 554 <mx2.beth.k12.pa.us[10.135.1.23]>: Client host rejected: Access denied (in reply to end of DATA command)) so amavis picks it up then someone says access denied. my next relay is sitting at " smtp.beth.k12.pa.us:2525 " so it looks like that MTA is complaining about MX2 sending to it. maybe because it's says it's hostname is localhost ??? this below is another issue where the bounce can't leave the building. Jul 29 10:20:11 mx2 postfix/cleanup[63726]: 6C64951C06E7: message-id=<20100729142011.6c64951c0...@mx1.beth.k12.pa.us> Jul 29 10:20:11 mx2 postfix/bounce[63731]: 15B7551C06DA: sender non-delivery notification: 6C64951C06E7 Jul 29 10:20:11 mx2 postfix/qmgr[63217]: 6C64951C06E7: from=<>, size=4388, nrcpt=1 (queue active) Jul 29 10:20:11 mx2 postfix/qmgr[63217]: 15B7551C06DA: removed Jul 29 10:20:11 mx2 postfix/smtp[63732]: connect to gmail-smtp-in.l.google.com[74.125.91.27]:25: Connection refused Jul 29 10:20:11 mx2 postfix/smtp[63732]: connect to alt1.gmail-smtp-in.l.google.com[74.125.77.27]:25: Connection refused Jul 29 10:20:11 mx2 postfix/smtp[63732]: connect to alt2.gmail-smtp-in.l.google.com[74.125.43.27]:25: Connection refused Jul 29 10:20:11 mx2 postfix/smtp[63732]: connect to alt3.gmail-smtp-in.l.google.com[74.125.155.27]:25: Connection refused Jul 29 10:20:11 mx2 postfix/smtp[63732]: connect to alt4.gmail-smtp-in.l.google.com[74.125.157.27]:25: Connection refused Jul 29 10:20:11 mx2 postfix/smtp[63732]: 6C64951C06E7: to=<f...@gmail.com>, relay=none, delay=0.03, delays=0/0.01/0.01/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.157.27]:25: Connection refused) postconf from MX2 command_directory = /usr/sbin config_directory = /etc/postfix content_filter = smtp-amavis:[127.0.0.1]:10024 daemon_directory = /usr/libexec/postfix debug_peer_level = 2 disable_vrfy_command = yes enable_server_options = yes html_directory = no inet_interfaces = localhost local_recipient_maps = mail_owner = _postfix mailbox_size_limit = 0 mailbox_transport = dovecot mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man mydestination = $myhostname,localhost.$mydomain,localhost,beth.k12.pa.us,bethsd.org mydomain = beth.k12.pa.us mydomain_fallback = localhost myhostname = mx1.beth.k12.pa.us mynetworks = 127.0.0.1/32,10.135.0.0/16,192.227.0.10 mynetworks_style = host myorigin = $myhostname newaliases_path = /usr/bin/newaliases queue_directory = /private/var/spool/postfix readme_directory = /usr/share/doc/postfix sample_directory = /usr/share/doc/postfix/examples sendmail_path = /usr/sbin/sendmail setgid_group = _postdrop smtpd_client_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_rbl_client zen.spamhaus.org, permit smtpd_data_restrictions = permit_mynetworks, reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination, reject_rbl_client zen.spamhaus.org, permit smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_non_fqdn_sender, permit smtpd_tls_key_file = unknown_local_recipient_reject_code = 550 postconf -v has tons of info beyond what i have set.
