On Thu, Oct 30, 2008 at 12:35 PM, Jordi Espasa Clofent <[EMAIL PROTECTED]> wrote: > Hi all, > > My server has the next anvil(8) config: > > smtpd_client_connection_rate_limit = 100 > smtpd_client_recipient_rate_limit = 20 > > It works fine, and when I test it from another SMTP (sending a mail to 30 > recipients) the logs shows cleary: > ...
> limit exceeded: 29 from opengea.org[85.48.253.234] for service smtp > Oct 30 15:55:00 mail09 postfix/smtpd[11279]: warning: Recipient address rate > limit exceeded: 30 from opengea.org[85.48.253.234] for service > > I see maillog and mailboxes and I sww that the test mail has been delivered > to the first 20 recipients according the anvil(8) config. But ¿what happens > with the 10 last ones? > > ¿The sender MTA re-send the complete mail (with 30 recipients again) or the > non-delivered mail part (with the 10 last ones)? The smarts MTA like Postfix will send the 10 lasts at next time. Only if destination server don't use 'smtpd_hard_error_limit = 1' > > ¿The sender MTA send any notification to the sender account? > No. Only if delay_warning_time is set or queue lifetime (ex. maximal_queue_lifetime) is expired. > -- > Thanks, > Jordi Espasa Clofent > -- Reinaldo de Carvalho http://korreio.sf.net http://python-cyrus.sf.net
