SamY wrote: > Well, that's strange. According to the log, everything looks perfect. > The quick select command is successful and the AVP reports that it has > set the volume to -40. The plugin is sending that information back to > the client to synch its volume. Are you sure that this particular power > on sequence resulted in the volume being set to -30? Maybe it is being > changed after the power on somehow. The best way to tell is to continue > the debug session beyond the power on sequence. Can you generate a debug > consisting of power on, followed by a play command and then a volume > change? Also, check the receiver front panel volume level after the > power on, and then after the play command to see if/when it is changing. > Thanks.
I watched it thinking I would see a -30 and then a -40, or a -40 and then a -30, but it was rock steady at -30. So I did this experiment: I set the player volume so it was -20 on the AVP (about 2/3 on the player volume bar). Then I turned off the player. Once everything was off I turned the player back on again. The screen came on an it's volume was about 2/3. After the AVP turned on and everything settled (about 10 seconds) the players volume was set to the -30 level again (about 1/3 on the display). I take it that your AVR does not behave this way? Does your AVR have a default volume setting when turned on? This is an option in the AVP. So no matter what the setting was before it was turned off, mine will reset itself on start to -30. I could select any volume. Chris ------------------------------------------------------------------------ Aesculus's Profile: http://forums.slimdevices.com/member.php?userid=14876 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 _______________________________________________ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
