Hi Abhijit, On Thu, 16 Nov 2006 ठà¤à¤¿à¤à¤¿à¤¤ à¤à¥à¤ªà¤à¤à¤°(Abhijit Bhopatkar) wrote : >I have got Hathway connection and it works flawlessly in ubuntu >Infact there is really nothing to it.
Thats what I thought too :-) > >I wish you had given all the steps and settings in your first mail itself so >that i could have checked whats missing I thought I did !!! > >anyway for me it works the following way. > >ALL COMMANDS NEED YOU TO BE ROOT > >ifconfig <eth0> <my ip given by hathway> up >route add default gw <gateway ip given by hathway> <eth0> >echo "nameserver <dns given by hathway>" > /etc/resolv.conf I did EXACTLY that !!! Only first I had tried with the GUI tools and then through CLI. > >thats it it should just work............ It should !! But it s not !! Another observation I made is , everytime I run ifconfig, I see that for eth0, number of Rx packets is increasing. However, Tx is always 0. Except when I reset the cabel modem, I see the Tx values increase slightly to 42 -60 I don't know if this has any relevance, but according to me, my workstation is recieving packets but unable to send anything to the outside world. ping commands give : SIOCTADDR network unreachable !!! -- Raseel -- ______________________________________________________________________ Pune GNU/Linux Users Group Mailing List: (plug-mail@plug.org.in) List Information: http://plug.org.in/cgi-bin/mailman/listinfo/plug-mail Send 'help' to [EMAIL PROTECTED] for mailing instructions.
