Your message dated Sun, 21 Jun 2015 15:47:18 +0000
with message-id <[email protected]>
and subject line Bug#7: Removed package(s) from unstable
has caused the Debian Bug report #599819,
regarding udisks: First mount for new usb flash drive get permissions error
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
599819: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=599819
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: udisks
Version: 1.0.1+git20100614-3
Severity: minor
1. Insert a new flash drive from EMtec, ref. C250.
2. An error message appears telling that it is impossible to mount this device
because of bad permissions.
3. Unplug the device.
4. Insert again and all work fine.
Dmesg :
[ 132.712050] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 132.846946] usb 1-4: New USB device found, idVendor=13fe, idProduct=3100
[ 132.846955] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 132.846960] usb 1-4: Product: USB DISK 2.0
[ 132.846963] usb 1-4: Manufacturer:
[ 132.846967] usb 1-4: SerialNumber: 07A20507830F7FC9
[ 132.849192] usb 1-4: configuration #1 chosen from 1 choice
[ 132.940170] Initializing USB Mass Storage driver...
[ 132.944117] scsi2 : SCSI emulation for USB Mass Storage devices
[ 132.944511] usbcore: registered new interface driver usb-storage
[ 132.944517] USB Mass Storage support registered.
[ 132.952432] usb-storage: device found at 2
[ 132.952437] usb-storage: waiting for device to settle before scanning
[ 137.956045] usb-storage: device scan complete
[ 137.974479] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP
PQ: 0 ANSI: 0 CCS
[ 137.977844] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 138.870356] sd 2:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.00 GB/3.73
GiB)
[ 138.873891] sd 2:0:0:0: [sdc] Write Protect is off
[ 138.873897] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 138.873901] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 138.882336] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 138.882346] sdc: sdc1
[ 138.916111] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 138.916122] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 300.729353] usb 1-4: USB disconnect, address 2
[ 306.688026] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 306.822853] usb 1-4: New USB device found, idVendor=13fe, idProduct=3100
[ 306.822860] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 306.822865] usb 1-4: Product: USB DISK 2.0
[ 306.822869] usb 1-4: Manufacturer:
[ 306.822872] usb 1-4: SerialNumber: 07A20507830F7FC9
[ 306.825151] usb 1-4: configuration #1 chosen from 1 choice
[ 306.836156] scsi3 : SCSI emulation for USB Mass Storage devices
[ 306.838788] usb-storage: device found at 3
[ 306.838793] usb-storage: waiting for device to settle before scanning
[ 311.837297] usb-storage: device scan complete
[ 311.855624] scsi 3:0:0:0: Direct-Access USB DISK 2.0 PMAP
PQ: 0 ANSI: 0 CCS
[ 311.859246] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 312.753157] sd 3:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.00 GB/3.73
GiB)
[ 312.756648] sd 3:0:0:0: [sdc] Write Protect is off
[ 312.756656] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 312.756661] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 312.765638] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 312.765650] sdc: sdc1
[ 312.788571] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 312.788585] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 313.322005] FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
lsusb -d 13fe:3100
Bus 001 Device 003: ID 13fe:3100 Kingston Technology Company Inc. 2 GB USB stick
Reported size here is wrong : it should be 4GB (other issue is declared in
Debian Bug system).
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages udisks depends on:
ii dbus 1.2.24-3 simple interprocess messaging syst
ii libatasmart4 0.17+git20100219-2 ATA S.M.A.R.T. reading and parsing
ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib
ii libdbus-1-3 1.2.24-3 simple interprocess messaging syst
ii libdbus-glib-1-2 0.88-2 simple interprocess messaging syst
ii libdevmapper1.02.1 2:1.02.48-3 The Linux Kernel Device Mapper use
ii libglib2.0-0 2.24.2-1 The GLib library of C routines
ii libgudev-1.0-0 160-1 GObject-based wrapper library for
ii libparted0debian1 2.3-2 The GNU Parted disk partitioning s
ii libpolkit-backend-1-0 0.96-3 PolicyKit backend API
ii libpolkit-gobject-1-0 0.96-3 PolicyKit Authorization API
ii libsgutils2-2 1.29-1 utilities for devices using the SC
ii libudev0 160-1 libudev shared library
ii udev 160-1 /dev/ and hotplug management daemo
Versions of packages udisks recommends:
ii dosfstools 3.0.9-1 utilities for making and checking
ii hdparm 9.27-2.1 tune hard disk parameters for high
ii mtools 4.0.12-1 Tools for manipulating MSDOS files
ii ntfs-3g 1:2010.3.6-1 read-write NTFS driver for FUSE
ii ntfsprogs 2.0.0-1+b1 tools for doing neat things in NTF
ii policykit-1 0.96-3 framework for managing administrat
Versions of packages udisks suggests:
pn cryptsetup <none> (no description available)
pn mdadm <none> (no description available)
pn reiserfsprogs <none> (no description available)
pn xfsprogs <none> (no description available)
-- no debconf information
--- End Message ---
--- Begin Message ---
Version: 1.0.5-1+rm
Dear submitter,
as the package udisks has just been removed from the Debian archive
unstable we hereby close the associated bug reports. We are sorry
that we couldn't deal with your issue properly.
For details on the removal, please see https://bugs.debian.org/7
The version of this package that was in Debian prior to this removal
can still be found using http://snapshot.debian.org/.
This message was generated automatically; if you believe that there is
a problem with it please contact the archive administrators by mailing
[email protected].
Debian distribution maintenance software
pp.
Luca Falavigna (the ftpmaster behind the curtain)
--- End Message ---
_______________________________________________
Pkg-utopia-maintainers mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-utopia-maintainers
