Hello
On 8/24/18, H. Hirzel <hannes.hir...@gmail.com> wrote:
> On 8/23/18, Jesús Marí <jmariagui...@gmail.com> wrote:
>> I'll take a look to *nteract*, seems that it uses the same protocol to
>> communicate with kernels.
>
> Good, actually my goal is to have a simple installation in a new Linux
> installation,
> something like
>
> a) download nteract (https://nteract.io/desktop), a 50MB executable file
> b) set up Pharo 6.1 with JupyterTalk
> c) whatever else is necessary, hopefully not to much
>
I have now a working JupyterTalk installation, see the attached screen shot.
What needs to be done is to come up with a reviewed, reproducible,
easy to use installation process.
The steps I used are
a) a fresh new Ubuntu 18.04.1 64 bit bionic beaver installation
then
sudo apt-get update
b) python --version
Command 'python' not found, but can be installed with:
python3 --version
Python 3.6.5
b) Instead of anaconda I tried then pip3 approach
sudo apt install python3-pip
python3 -m pip install jupyter
But
jupyter notebook
did not work.
After
sudo apt install jupyter-core
sudo apt install jupyter-notebook
This only downloaded 50MB instead of the 600MB for anaconda
The command
jupyter-notebook
worked. Note the dash, i.e. it is a different command
Then
sudo apt-get install curl
and the Pharo 6.1 64 bit installation
curl get.pharo.org/64/61+vm | bash
Then the Metacello installation taken from https://github.com/jmari/JupyterTalk.
Creation of the kernel.json file as described in
https://github.com/jmari/JupyterTalk was not necessary
The content of
ls /usr/share/jupyter/kernels/
is only
python3
Interestingly, no entry for a Pharo kernel.
The CLI command
jupyter-notebook
brings up a working Jupyter dashboard with the Pharo Smalltalk menu
entry installed in the 'New' menu.
--Hannes
On 8/24/18, H. Hirzel <hannes.hir...@gmail.com> wrote:
> On 8/23/18, Jesús Marí <jmariagui...@gmail.com> wrote:
>> I'll take a look to *nteract*, seems that it uses the same protocol to
>> communicate with kernels.
>
> Good, actually my goal is to have a simple installation in a new Linux
> installation,
> something like
>
> a) download nteract (https://nteract.io/desktop), a 50MB executable file
> b) set up Pharo 6.1 with JupyterTalk
> c) whatever else is necessary, hopefully not to much
>
