On 04.10.2018 06:19, David Rowley wrote:
On 12 September 2018 at 08:32, Konstantin Knizhnik
<k.knizh...@postgrespro.ru> wrote:
Also the patch proposed by you is much simple and does mostly the same. Yes,
it is not covering CHECK constraints,
I started to look at this and found a problem in regards to varno
during the predicate_implied_by() test. The problem is that the
partition bound is always stored as varno=1 (For example, see how
get_qual_for_list() calls makeVar()). This causes the patch to fail in
cases where the partitioned table is not varno=1. You're also
incorrectly using rinfo->clause to pass to predicate_implied_by().
This is a problem because stored here have not been translated to have
the child varattnos. childqual is the correct thing to use as that's
just been translated. You may have not used it as the varnos will have
been converted to the child's varno, which will never be varno=1, so
you might have found that not to work due to the missing code to
change the varnos to 1.
I've attached the diff for allpaths.c (only) that I ended up with to
make it work. This causes the output of many other regression test to
change, so you'll need to go over these and verify everything is
correct again.
Please, can you also add a test which tests this code which has a
partition with columns in a different order than it's parent. Having
an INT and a TEXT column is best as if the translations are done
incorrectly it's likely to result in a crash which will alert us to
the issue. It would be good to also verify the test causes a crash if
you temporarily put the code back to using the untranslated qual.
Thanks for working on this.
Thank you very much for detecting and fixing this problem.
I have checked that all changes in plan caused by this fix are correct.
Updated version of the patch is attached.
--
Konstantin Knizhnik
Postgres Professional: http://www.postgrespro.com
The Russian Postgres Company
diff --git a/src/backend/optimizer/path/allpaths.c b/src/backend/optimizer/path/allpaths.c
index 5f74d3b..b628ac7 100644
--- a/src/backend/optimizer/path/allpaths.c
+++ b/src/backend/optimizer/path/allpaths.c
@@ -37,6 +37,7 @@
#include "optimizer/paths.h"
#include "optimizer/plancat.h"
#include "optimizer/planner.h"
+#include "optimizer/predtest.h"
#include "optimizer/prep.h"
#include "optimizer/restrictinfo.h"
#include "optimizer/tlist.h"
@@ -1052,6 +1053,27 @@ set_append_rel_size(PlannerInfo *root, RelOptInfo *rel,
/* Restriction reduces to constant TRUE, so drop it */
continue;
}
+
+ /*
+ * For partitions, we may be able to eliminate some quals if
+ * they're implied by the partition bound.
+ */
+ if (childrel->partition_qual != NIL)
+ {
+ Node *checkqual = copyObject(childqual);
+
+ /*
+ * Since the partition_qual has all Vars stored as varno=1, we
+ * must convert all Vars of the childqual to have their varnos
+ * set to 1 so that predicate_implied_by can properly match
+ * implied quals.
+ */
+ ChangeVarNodes(checkqual, childrel->relid, 1, 0);
+
+ if (predicate_implied_by(list_make1(checkqual), childrel->partition_qual, false))
+ continue;
+ }
+
/* might have gotten an AND clause, if so flatten it */
foreach(lc2, make_ands_implicit((Expr *) childqual))
{
diff --git a/src/backend/optimizer/util/plancat.c b/src/backend/optimizer/util/plancat.c
index 8369e3a..8cd9b06 100644
--- a/src/backend/optimizer/util/plancat.c
+++ b/src/backend/optimizer/util/plancat.c
@@ -450,7 +450,8 @@ get_relation_info(PlannerInfo *root, Oid relationObjectId, bool inhparent,
*/
if (inhparent && relation->rd_rel->relkind == RELKIND_PARTITIONED_TABLE)
set_relation_partition_info(root, rel, relation);
-
+ else if (relation->rd_rel->relispartition)
+ rel->partition_qual = RelationGetPartitionQual(relation);
heap_close(relation, NoLock);
/*
diff --git a/src/test/regress/expected/inherit.out b/src/test/regress/expected/inherit.out
index 4f29d9f..67d7a41 100644
--- a/src/test/regress/expected/inherit.out
+++ b/src/test/regress/expected/inherit.out
@@ -1772,30 +1772,26 @@ explain (costs off) select * from list_parted where a is not null;
---------------------------------
Append
-> Seq Scan on part_ab_cd
- Filter: (a IS NOT NULL)
-> Seq Scan on part_ef_gh
- Filter: (a IS NOT NULL)
-> Seq Scan on part_null_xy
Filter: (a IS NOT NULL)
-(7 rows)
+(5 rows)
explain (costs off) select * from list_parted where a in ('ab', 'cd', 'ef');
QUERY PLAN
----------------------------------------------------------
Append
-> Seq Scan on part_ab_cd
- Filter: ((a)::text = ANY ('{ab,cd,ef}'::text[]))
-> Seq Scan on part_ef_gh
Filter: ((a)::text = ANY ('{ab,cd,ef}'::text[]))
-(5 rows)
+(4 rows)
explain (costs off) select * from list_parted where a = 'ab' or a in (null, 'cd');
- QUERY PLAN
----------------------------------------------------------------------------------------
+ QUERY PLAN
+------------------------------
Append
-> Seq Scan on part_ab_cd
- Filter: (((a)::text = 'ab'::text) OR ((a)::text = ANY ('{NULL,cd}'::text[])))
-(3 rows)
+(2 rows)
explain (costs off) select * from list_parted where a = 'ab';
QUERY PLAN
@@ -1848,30 +1844,25 @@ explain (costs off) select * from range_list_parted where a = 5;
(5 rows)
explain (costs off) select * from range_list_parted where b = 'ab';
- QUERY PLAN
-------------------------------------
+ QUERY PLAN
+----------------------------------
Append
-> Seq Scan on part_1_10_ab
- Filter: (b = 'ab'::bpchar)
-> Seq Scan on part_10_20_ab
- Filter: (b = 'ab'::bpchar)
-> Seq Scan on part_21_30_ab
- Filter: (b = 'ab'::bpchar)
-> Seq Scan on part_40_inf_ab
- Filter: (b = 'ab'::bpchar)
-(9 rows)
+(5 rows)
explain (costs off) select * from range_list_parted where a between 3 and 23 and b in ('ab');
- QUERY PLAN
------------------------------------------------------------------
+ QUERY PLAN
+---------------------------------
Append
-> Seq Scan on part_1_10_ab
- Filter: ((a >= 3) AND (a <= 23) AND (b = 'ab'::bpchar))
+ Filter: (a >= 3)
-> Seq Scan on part_10_20_ab
- Filter: ((a >= 3) AND (a <= 23) AND (b = 'ab'::bpchar))
-> Seq Scan on part_21_30_ab
- Filter: ((a >= 3) AND (a <= 23) AND (b = 'ab'::bpchar))
-(7 rows)
+ Filter: (a <= 23)
+(6 rows)
/* Should select no rows because range partition key cannot be null */
explain (costs off) select * from range_list_parted where a is null;
@@ -1887,44 +1878,34 @@ explain (costs off) select * from range_list_parted where b is null;
------------------------------------
Append
-> Seq Scan on part_40_inf_null
- Filter: (b IS NULL)
-(3 rows)
+(2 rows)
explain (costs off) select * from range_list_parted where a is not null and a < 67;
- QUERY PLAN
-------------------------------------------------
+ QUERY PLAN
+------------------------------------
Append
-> Seq Scan on part_1_10_ab
- Filter: ((a IS NOT NULL) AND (a < 67))
-> Seq Scan on part_1_10_cd
- Filter: ((a IS NOT NULL) AND (a < 67))
-> Seq Scan on part_10_20_ab
- Filter: ((a IS NOT NULL) AND (a < 67))
-> Seq Scan on part_10_20_cd
- Filter: ((a IS NOT NULL) AND (a < 67))
-> Seq Scan on part_21_30_ab
- Filter: ((a IS NOT NULL) AND (a < 67))
-> Seq Scan on part_21_30_cd
- Filter: ((a IS NOT NULL) AND (a < 67))
-> Seq Scan on part_40_inf_ab
- Filter: ((a IS NOT NULL) AND (a < 67))
+ Filter: (a < 67)
-> Seq Scan on part_40_inf_cd
- Filter: ((a IS NOT NULL) AND (a < 67))
+ Filter: (a < 67)
-> Seq Scan on part_40_inf_null
- Filter: ((a IS NOT NULL) AND (a < 67))
-(19 rows)
+ Filter: (a < 67)
+(13 rows)
explain (costs off) select * from range_list_parted where a >= 30;
QUERY PLAN
------------------------------------
Append
-> Seq Scan on part_40_inf_ab
- Filter: (a >= 30)
-> Seq Scan on part_40_inf_cd
- Filter: (a >= 30)
-> Seq Scan on part_40_inf_null
- Filter: (a >= 30)
-(7 rows)
+(4 rows)
drop table list_parted;
drop table range_list_parted;
@@ -1965,7 +1946,7 @@ explain (costs off) select * from mcrparted where a = 10 and abs(b) = 5; -- scan
-> Seq Scan on mcrparted1
Filter: ((a = 10) AND (abs(b) = 5))
-> Seq Scan on mcrparted2
- Filter: ((a = 10) AND (abs(b) = 5))
+ Filter: (abs(b) = 5)
-> Seq Scan on mcrparted_def
Filter: ((a = 10) AND (abs(b) = 5))
(7 rows)
@@ -1997,25 +1978,20 @@ explain (costs off) select * from mcrparted where a > -1; -- scans all partition
-> Seq Scan on mcrparted0
Filter: (a > '-1'::integer)
-> Seq Scan on mcrparted1
- Filter: (a > '-1'::integer)
-> Seq Scan on mcrparted2
- Filter: (a > '-1'::integer)
-> Seq Scan on mcrparted3
- Filter: (a > '-1'::integer)
-> Seq Scan on mcrparted4
- Filter: (a > '-1'::integer)
-> Seq Scan on mcrparted5
- Filter: (a > '-1'::integer)
-> Seq Scan on mcrparted_def
Filter: (a > '-1'::integer)
-(15 rows)
+(10 rows)
explain (costs off) select * from mcrparted where a = 20 and abs(b) = 10 and c > 10; -- scans mcrparted4
- QUERY PLAN
------------------------------------------------------------
+ QUERY PLAN
+----------------------------------------------
Append
-> Seq Scan on mcrparted4
- Filter: ((c > 10) AND (a = 20) AND (abs(b) = 10))
+ Filter: ((c > 10) AND (abs(b) = 10))
(3 rows)
explain (costs off) select * from mcrparted where a = 20 and c > 20; -- scans mcrparted3, mcrparte4, mcrparte5, mcrparted_def
@@ -2025,7 +2001,7 @@ explain (costs off) select * from mcrparted where a = 20 and c > 20; -- scans mc
-> Seq Scan on mcrparted3
Filter: ((c > 20) AND (a = 20))
-> Seq Scan on mcrparted4
- Filter: ((c > 20) AND (a = 20))
+ Filter: (c > 20)
-> Seq Scan on mcrparted5
Filter: ((c > 20) AND (a = 20))
-> Seq Scan on mcrparted_def
@@ -2048,13 +2024,13 @@ explain (costs off) select min(a), max(a) from parted_minmax where b = '12345';
-> Merge Append
Sort Key: parted_minmax1.a
-> Index Only Scan using parted_minmax1i on parted_minmax1
- Index Cond: ((a IS NOT NULL) AND (b = '12345'::text))
+ Index Cond: (b = '12345'::text)
InitPlan 2 (returns $1)
-> Limit
-> Merge Append
Sort Key: parted_minmax1_1.a DESC
-> Index Only Scan Backward using parted_minmax1i on parted_minmax1 parted_minmax1_1
- Index Cond: ((a IS NOT NULL) AND (b = '12345'::text))
+ Index Cond: (b = '12345'::text)
(13 rows)
select min(a), max(a) from parted_minmax where b = '12345';
diff --git a/src/test/regress/expected/partition_aggregate.out b/src/test/regress/expected/partition_aggregate.out
index 6bc1068..41f3ac5 100644
--- a/src/test/regress/expected/partition_aggregate.out
+++ b/src/test/regress/expected/partition_aggregate.out
@@ -732,7 +732,6 @@ SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a LEFT JOI
Hash Cond: (pagg_tab1_p1.x = y)
Filter: ((pagg_tab1_p1.x > 5) OR (y < 20))
-> Seq Scan on pagg_tab1_p1
- Filter: (x < 20)
-> Hash
-> Result
One-Time Filter: false
@@ -742,11 +741,10 @@ SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a LEFT JOI
Hash Cond: (pagg_tab1_p2.x = pagg_tab2_p2.y)
Filter: ((pagg_tab1_p2.x > 5) OR (pagg_tab2_p2.y < 20))
-> Seq Scan on pagg_tab1_p2
- Filter: (x < 20)
-> Hash
-> Seq Scan on pagg_tab2_p2
Filter: (y > 10)
-(23 rows)
+(21 rows)
SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a LEFT JOIN (SELECT * FROM pagg_tab2 WHERE y > 10) b ON a.x = b.y WHERE a.x > 5 or b.y < 20 GROUP BY a.x, b.y ORDER BY 1, 2;
x | y | count
@@ -778,7 +776,6 @@ SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a FULL JOI
Hash Cond: (pagg_tab1_p1.x = y)
Filter: ((pagg_tab1_p1.x > 5) OR (y < 20))
-> Seq Scan on pagg_tab1_p1
- Filter: (x < 20)
-> Hash
-> Result
One-Time Filter: false
@@ -788,7 +785,6 @@ SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a FULL JOI
Hash Cond: (pagg_tab1_p2.x = pagg_tab2_p2.y)
Filter: ((pagg_tab1_p2.x > 5) OR (pagg_tab2_p2.y < 20))
-> Seq Scan on pagg_tab1_p2
- Filter: (x < 20)
-> Hash
-> Seq Scan on pagg_tab2_p2
Filter: (y > 10)
@@ -798,11 +794,10 @@ SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a FULL JOI
Hash Cond: (pagg_tab2_p3.y = x)
Filter: ((x > 5) OR (pagg_tab2_p3.y < 20))
-> Seq Scan on pagg_tab2_p3
- Filter: (y > 10)
-> Hash
-> Result
One-Time Filter: false
-(35 rows)
+(32 rows)
SELECT a.x, b.y, count(*) FROM (SELECT * FROM pagg_tab1 WHERE x < 20) a FULL JOIN (SELECT * FROM pagg_tab2 WHERE y > 10) b ON a.x = b.y WHERE a.x > 5 or b.y < 20 GROUP BY a.x, b.y ORDER BY 1, 2;
x | y | count
diff --git a/src/test/regress/expected/partition_join.out b/src/test/regress/expected/partition_join.out
index 3ba3aaf..169f431 100644
--- a/src/test/regress/expected/partition_join.out
+++ b/src/test/regress/expected/partition_join.out
@@ -216,7 +216,7 @@ SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a < 450) t1 LEFT JO
-> Hash Left Join
Hash Cond: (prt1_p1.a = b)
-> Seq Scan on prt1_p1
- Filter: ((a < 450) AND (b = 0))
+ Filter: (b = 0)
-> Hash
-> Result
One-Time Filter: false
@@ -254,7 +254,6 @@ SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a < 450) t1 FULL JO
Hash Cond: (prt1_p1.a = b)
Filter: ((prt1_p1.b = 0) OR (a = 0))
-> Seq Scan on prt1_p1
- Filter: (a < 450)
-> Hash
-> Result
One-Time Filter: false
@@ -270,11 +269,10 @@ SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a < 450) t1 FULL JO
Hash Cond: (prt2_p3.b = a)
Filter: ((b = 0) OR (prt2_p3.a = 0))
-> Seq Scan on prt2_p3
- Filter: (b > 250)
-> Hash
-> Result
One-Time Filter: false
-(27 rows)
+(25 rows)
SELECT t1.a, t1.c, t2.b, t2.c FROM (SELECT * FROM prt1 WHERE a < 450) t1 FULL JOIN (SELECT * FROM prt2 WHERE b > 250) t2 ON t1.a = t2.b WHERE t1.b = 0 OR t2.a = 0 ORDER BY t1.a, t2.b;
a | c | b | c
@@ -1006,7 +1004,7 @@ SELECT t1.a, t2.b FROM (SELECT * FROM prt1 WHERE a < 450) t1 LEFT JOIN (SELECT *
-> Sort
Sort Key: prt1_p1.a
-> Seq Scan on prt1_p1
- Filter: ((a < 450) AND (b = 0))
+ Filter: (b = 0)
-> Sort
Sort Key: b
-> Result
diff --git a/src/test/regress/expected/partition_prune.out b/src/test/regress/expected/partition_prune.out
index 24313e8..b81b163 100644
--- a/src/test/regress/expected/partition_prune.out
+++ b/src/test/regress/expected/partition_prune.out
@@ -25,22 +25,20 @@ explain (costs off) select * from lp where a > 'a' and a < 'd';
-----------------------------------------------------------
Append
-> Seq Scan on lp_bc
- Filter: ((a > 'a'::bpchar) AND (a < 'd'::bpchar))
-> Seq Scan on lp_default
Filter: ((a > 'a'::bpchar) AND (a < 'd'::bpchar))
-(5 rows)
+(4 rows)
explain (costs off) select * from lp where a > 'a' and a <= 'd';
QUERY PLAN
------------------------------------------------------------
Append
-> Seq Scan on lp_ad
- Filter: ((a > 'a'::bpchar) AND (a <= 'd'::bpchar))
+ Filter: (a > 'a'::bpchar)
-> Seq Scan on lp_bc
- Filter: ((a > 'a'::bpchar) AND (a <= 'd'::bpchar))
-> Seq Scan on lp_default
Filter: ((a > 'a'::bpchar) AND (a <= 'd'::bpchar))
-(7 rows)
+(6 rows)
explain (costs off) select * from lp where a = 'a';
QUERY PLAN
@@ -63,24 +61,19 @@ explain (costs off) select * from lp where a is not null;
---------------------------------
Append
-> Seq Scan on lp_ad
- Filter: (a IS NOT NULL)
-> Seq Scan on lp_bc
- Filter: (a IS NOT NULL)
-> Seq Scan on lp_ef
- Filter: (a IS NOT NULL)
-> Seq Scan on lp_g
- Filter: (a IS NOT NULL)
-> Seq Scan on lp_default
Filter: (a IS NOT NULL)
-(11 rows)
+(7 rows)
explain (costs off) select * from lp where a is null;
- QUERY PLAN
------------------------------
+ QUERY PLAN
+---------------------------
Append
-> Seq Scan on lp_null
- Filter: (a IS NULL)
-(3 rows)
+(2 rows)
explain (costs off) select * from lp where a = 'a' or a = 'c';
QUERY PLAN
@@ -93,13 +86,13 @@ explain (costs off) select * from lp where a = 'a' or a = 'c';
(5 rows)
explain (costs off) select * from lp where a is not null and (a = 'a' or a = 'c');
- QUERY PLAN
---------------------------------------------------------------------------------
+ QUERY PLAN
+----------------------------------------------------------
Append
-> Seq Scan on lp_ad
- Filter: ((a IS NOT NULL) AND ((a = 'a'::bpchar) OR (a = 'c'::bpchar)))
+ Filter: ((a = 'a'::bpchar) OR (a = 'c'::bpchar))
-> Seq Scan on lp_bc
- Filter: ((a IS NOT NULL) AND ((a = 'a'::bpchar) OR (a = 'c'::bpchar)))
+ Filter: ((a = 'a'::bpchar) OR (a = 'c'::bpchar))
(5 rows)
explain (costs off) select * from lp where a <> 'g';
@@ -107,42 +100,33 @@ explain (costs off) select * from lp where a <> 'g';
------------------------------------
Append
-> Seq Scan on lp_ad
- Filter: (a <> 'g'::bpchar)
-> Seq Scan on lp_bc
- Filter: (a <> 'g'::bpchar)
-> Seq Scan on lp_ef
- Filter: (a <> 'g'::bpchar)
-> Seq Scan on lp_default
Filter: (a <> 'g'::bpchar)
-(9 rows)
+(6 rows)
explain (costs off) select * from lp where a <> 'a' and a <> 'd';
QUERY PLAN
-------------------------------------------------------------
Append
-> Seq Scan on lp_bc
- Filter: ((a <> 'a'::bpchar) AND (a <> 'd'::bpchar))
-> Seq Scan on lp_ef
- Filter: ((a <> 'a'::bpchar) AND (a <> 'd'::bpchar))
-> Seq Scan on lp_g
- Filter: ((a <> 'a'::bpchar) AND (a <> 'd'::bpchar))
-> Seq Scan on lp_default
Filter: ((a <> 'a'::bpchar) AND (a <> 'd'::bpchar))
-(9 rows)
+(6 rows)
explain (costs off) select * from lp where a not in ('a', 'd');
QUERY PLAN
------------------------------------------------
Append
-> Seq Scan on lp_bc
- Filter: (a <> ALL ('{a,d}'::bpchar[]))
-> Seq Scan on lp_ef
- Filter: (a <> ALL ('{a,d}'::bpchar[]))
-> Seq Scan on lp_g
- Filter: (a <> ALL ('{a,d}'::bpchar[]))
-> Seq Scan on lp_default
Filter: (a <> ALL ('{a,d}'::bpchar[]))
-(9 rows)
+(6 rows)
-- collation matches the partitioning collation, pruning works
create table coll_pruning (a text collate "C") partition by list (a);
@@ -150,12 +134,11 @@ create table coll_pruning_a partition of coll_pruning for values in ('a');
create table coll_pruning_b partition of coll_pruning for values in ('b');
create table coll_pruning_def partition of coll_pruning default;
explain (costs off) select * from coll_pruning where a collate "C" = 'a' collate "C";
- QUERY PLAN
----------------------------------------------
+ QUERY PLAN
+----------------------------------
Append
-> Seq Scan on coll_pruning_a
- Filter: (a = 'a'::text COLLATE "C")
-(3 rows)
+(2 rows)
-- collation doesn't match the partitioning collation, no pruning occurs
explain (costs off) select * from coll_pruning where a collate "POSIX" = 'a' collate "POSIX";
@@ -192,30 +175,27 @@ create table rlp5 partition of rlp for values from (31) to (maxvalue) partition
create table rlp5_default partition of rlp5 default;
create table rlp5_1 partition of rlp5 for values from (31) to (40);
explain (costs off) select * from rlp where a < 1;
- QUERY PLAN
--------------------------
+ QUERY PLAN
+------------------------
Append
-> Seq Scan on rlp1
- Filter: (a < 1)
-(3 rows)
+(2 rows)
explain (costs off) select * from rlp where 1 > a; /* commuted */
- QUERY PLAN
--------------------------
+ QUERY PLAN
+------------------------
Append
-> Seq Scan on rlp1
- Filter: (1 > a)
-(3 rows)
+(2 rows)
explain (costs off) select * from rlp where a <= 1;
QUERY PLAN
--------------------------
Append
-> Seq Scan on rlp1
- Filter: (a <= 1)
-> Seq Scan on rlp2
Filter: (a <= 1)
-(5 rows)
+(4 rows)
explain (costs off) select * from rlp where a = 1;
QUERY PLAN
@@ -274,65 +254,47 @@ explain (costs off) select * from rlp where a <= 10;
---------------------------------------
Append
-> Seq Scan on rlp1
- Filter: (a <= 10)
-> Seq Scan on rlp2
- Filter: (a <= 10)
-> Seq Scan on rlp_default_10
- Filter: (a <= 10)
-> Seq Scan on rlp_default_default
Filter: (a <= 10)
-(9 rows)
+(6 rows)
explain (costs off) select * from rlp where a > 10;
QUERY PLAN
---------------------------------------
Append
-> Seq Scan on rlp3abcd
- Filter: (a > 10)
-> Seq Scan on rlp3efgh
- Filter: (a > 10)
-> Seq Scan on rlp3nullxy
- Filter: (a > 10)
-> Seq Scan on rlp3_default
- Filter: (a > 10)
-> Seq Scan on rlp4_1
- Filter: (a > 10)
-> Seq Scan on rlp4_2
- Filter: (a > 10)
-> Seq Scan on rlp4_default
- Filter: (a > 10)
-> Seq Scan on rlp5_1
- Filter: (a > 10)
-> Seq Scan on rlp5_default
- Filter: (a > 10)
-> Seq Scan on rlp_default_30
- Filter: (a > 10)
-> Seq Scan on rlp_default_default
Filter: (a > 10)
-(23 rows)
+(13 rows)
explain (costs off) select * from rlp where a < 15;
QUERY PLAN
---------------------------------------
Append
-> Seq Scan on rlp1
- Filter: (a < 15)
-> Seq Scan on rlp2
- Filter: (a < 15)
-> Seq Scan on rlp_default_10
- Filter: (a < 15)
-> Seq Scan on rlp_default_default
Filter: (a < 15)
-(9 rows)
+(6 rows)
explain (costs off) select * from rlp where a <= 15;
QUERY PLAN
---------------------------------------
Append
-> Seq Scan on rlp1
- Filter: (a <= 15)
-> Seq Scan on rlp2
- Filter: (a <= 15)
-> Seq Scan on rlp3abcd
Filter: (a <= 15)
-> Seq Scan on rlp3efgh
@@ -342,10 +304,9 @@ explain (costs off) select * from rlp where a <= 15;
-> Seq Scan on rlp3_default
Filter: (a <= 15)
-> Seq Scan on rlp_default_10
- Filter: (a <= 15)
-> Seq Scan on rlp_default_default
Filter: (a <= 15)
-(17 rows)
+(14 rows)
explain (costs off) select * from rlp where a > 15 and b = 'ab';
QUERY PLAN
@@ -354,17 +315,17 @@ explain (costs off) select * from rlp where a > 15 and b = 'ab';
-> Seq Scan on rlp3abcd
Filter: ((a > 15) AND ((b)::text = 'ab'::text))
-> Seq Scan on rlp4_1
- Filter: ((a > 15) AND ((b)::text = 'ab'::text))
+ Filter: ((b)::text = 'ab'::text)
-> Seq Scan on rlp4_2
- Filter: ((a > 15) AND ((b)::text = 'ab'::text))
+ Filter: ((b)::text = 'ab'::text)
-> Seq Scan on rlp4_default
- Filter: ((a > 15) AND ((b)::text = 'ab'::text))
+ Filter: ((b)::text = 'ab'::text)
-> Seq Scan on rlp5_1
- Filter: ((a > 15) AND ((b)::text = 'ab'::text))
+ Filter: ((b)::text = 'ab'::text)
-> Seq Scan on rlp5_default
- Filter: ((a > 15) AND ((b)::text = 'ab'::text))
+ Filter: ((b)::text = 'ab'::text)
-> Seq Scan on rlp_default_30
- Filter: ((a > 15) AND ((b)::text = 'ab'::text))
+ Filter: ((b)::text = 'ab'::text)
-> Seq Scan on rlp_default_default
Filter: ((a > 15) AND ((b)::text = 'ab'::text))
(17 rows)
@@ -422,9 +383,9 @@ explain (costs off) select * from rlp where a = 16 and b is not null;
------------------------------------------------
Append
-> Seq Scan on rlp3abcd
- Filter: ((b IS NOT NULL) AND (a = 16))
+ Filter: (a = 16)
-> Seq Scan on rlp3efgh
- Filter: ((b IS NOT NULL) AND (a = 16))
+ Filter: (a = 16)
-> Seq Scan on rlp3nullxy
Filter: ((b IS NOT NULL) AND (a = 16))
-> Seq Scan on rlp3_default
@@ -436,96 +397,68 @@ explain (costs off) select * from rlp where a is null;
------------------------------------
Append
-> Seq Scan on rlp_default_null
- Filter: (a IS NULL)
-(3 rows)
+(2 rows)
explain (costs off) select * from rlp where a is not null;
QUERY PLAN
---------------------------------------
Append
-> Seq Scan on rlp1
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp2
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp3abcd
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp3efgh
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp3nullxy
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp3_default
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp4_1
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp4_2
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp4_default
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp5_1
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp5_default
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp_default_10
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp_default_30
- Filter: (a IS NOT NULL)
-> Seq Scan on rlp_default_default
Filter: (a IS NOT NULL)
-(29 rows)
+(16 rows)
explain (costs off) select * from rlp where a > 30;
QUERY PLAN
---------------------------------------
Append
-> Seq Scan on rlp5_1
- Filter: (a > 30)
-> Seq Scan on rlp5_default
- Filter: (a > 30)
-> Seq Scan on rlp_default_default
Filter: (a > 30)
-(7 rows)
+(5 rows)
explain (costs off) select * from rlp where a = 30; /* only default is scanned */
QUERY PLAN
----------------------------------
Append
-> Seq Scan on rlp_default_30
- Filter: (a = 30)
-(3 rows)
+(2 rows)
explain (costs off) select * from rlp where a <= 31;
QUERY PLAN
---------------------------------------
Append
-> Seq Scan on rlp1
- Filter: (a <= 31)
-> Seq Scan on rlp2
- Filter: (a <= 31)
-> Seq Scan on rlp3abcd
- Filter: (a <= 31)
-> Seq Scan on rlp3efgh
- Filter: (a <= 31)
-> Seq Scan on rlp3nullxy
- Filter: (a <= 31)
-> Seq Scan on rlp3_default
- Filter: (a <= 31)
-> Seq Scan on rlp4_1
- Filter: (a <= 31)
-> Seq Scan on rlp4_2
- Filter: (a <= 31)
-> Seq Scan on rlp4_default
- Filter: (a <= 31)
-> Seq Scan on rlp5_1
Filter: (a <= 31)
-> Seq Scan on rlp5_default
Filter: (a <= 31)
-> Seq Scan on rlp_default_10
- Filter: (a <= 31)
-> Seq Scan on rlp_default_30
- Filter: (a <= 31)
-> Seq Scan on rlp_default_default
Filter: (a <= 31)
-(29 rows)
+(18 rows)
explain (costs off) select * from rlp where a = 1 or a = 7;
QUERY PLAN
@@ -570,9 +503,9 @@ explain (costs off) select * from rlp where a > 20 and a < 27;
-----------------------------------------
Append
-> Seq Scan on rlp4_1
- Filter: ((a > 20) AND (a < 27))
+ Filter: (a > 20)
-> Seq Scan on rlp4_2
- Filter: ((a > 20) AND (a < 27))
+ Filter: (a < 27)
-> Seq Scan on rlp4_default
Filter: ((a > 20) AND (a < 27))
-> Seq Scan on rlp_default_default
@@ -594,51 +527,37 @@ explain (costs off) select * from rlp where a >= 29;
-> Seq Scan on rlp4_default
Filter: (a >= 29)
-> Seq Scan on rlp5_1
- Filter: (a >= 29)
-> Seq Scan on rlp5_default
- Filter: (a >= 29)
-> Seq Scan on rlp_default_30
- Filter: (a >= 29)
-> Seq Scan on rlp_default_default
Filter: (a >= 29)
-(11 rows)
+(8 rows)
-- redundant clauses are eliminated
explain (costs off) select * from rlp where a > 1 and a = 10; /* only default */
- QUERY PLAN
-----------------------------------------
+ QUERY PLAN
+----------------------------------
Append
-> Seq Scan on rlp_default_10
- Filter: ((a > 1) AND (a = 10))
-(3 rows)
+(2 rows)
explain (costs off) select * from rlp where a > 1 and a >=15; /* rlp3 onwards, including default */
QUERY PLAN
-----------------------------------------
Append
-> Seq Scan on rlp3abcd
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp3efgh
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp3nullxy
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp3_default
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp4_1
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp4_2
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp4_default
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp5_1
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp5_default
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp_default_30
- Filter: ((a > 1) AND (a >= 15))
-> Seq Scan on rlp_default_default
Filter: ((a > 1) AND (a >= 15))
-(23 rows)
+(13 rows)
explain (costs off) select * from rlp where a = 1 and a = 3; /* empty */
QUERY PLAN
@@ -725,28 +644,23 @@ explain (costs off) select * from mc3p where a = 10 and abs(b) between 5 and 35;
-> Seq Scan on mc3p1
Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-> Seq Scan on mc3p2
- Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-> Seq Scan on mc3p3
- Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-> Seq Scan on mc3p4
- Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
+ Filter: (abs(b) <= 35)
-> Seq Scan on mc3p_default
Filter: ((a = 10) AND (abs(b) >= 5) AND (abs(b) <= 35))
-(11 rows)
+(9 rows)
explain (costs off) select * from mc3p where a > 10;
QUERY PLAN
--------------------------------
Append
-> Seq Scan on mc3p5
- Filter: (a > 10)
-> Seq Scan on mc3p6
- Filter: (a > 10)
-> Seq Scan on mc3p7
- Filter: (a > 10)
-> Seq Scan on mc3p_default
Filter: (a > 10)
-(9 rows)
+(6 rows)
explain (costs off) select * from mc3p where a >= 10;
QUERY PLAN
@@ -755,43 +669,36 @@ explain (costs off) select * from mc3p where a >= 10;
-> Seq Scan on mc3p1
Filter: (a >= 10)
-> Seq Scan on mc3p2
- Filter: (a >= 10)
-> Seq Scan on mc3p3
- Filter: (a >= 10)
-> Seq Scan on mc3p4
- Filter: (a >= 10)
-> Seq Scan on mc3p5
- Filter: (a >= 10)
-> Seq Scan on mc3p6
- Filter: (a >= 10)
-> Seq Scan on mc3p7
- Filter: (a >= 10)
-> Seq Scan on mc3p_default
Filter: (a >= 10)
-(17 rows)
+(11 rows)
explain (costs off) select * from mc3p where a < 10;
QUERY PLAN
--------------------------------
Append
-> Seq Scan on mc3p0
- Filter: (a < 10)
-> Seq Scan on mc3p1
Filter: (a < 10)
-> Seq Scan on mc3p_default
Filter: (a < 10)
-(7 rows)
+(6 rows)
explain (costs off) select * from mc3p where a <= 10 and abs(b) < 10;
QUERY PLAN
-----------------------------------------------
Append
-> Seq Scan on mc3p0
- Filter: ((a <= 10) AND (abs(b) < 10))
+ Filter: (abs(b) < 10)
-> Seq Scan on mc3p1
- Filter: ((a <= 10) AND (abs(b) < 10))
+ Filter: (abs(b) < 10)
-> Seq Scan on mc3p2
- Filter: ((a <= 10) AND (abs(b) < 10))
+ Filter: (abs(b) < 10)
-> Seq Scan on mc3p_default
Filter: ((a <= 10) AND (abs(b) < 10))
(9 rows)
@@ -805,11 +712,11 @@ explain (costs off) select * from mc3p where a = 11 and abs(b) = 0;
(3 rows)
explain (costs off) select * from mc3p where a = 20 and abs(b) = 10 and c = 100;
- QUERY PLAN
-------------------------------------------------------------
+ QUERY PLAN
+-----------------------------------------------
Append
-> Seq Scan on mc3p6
- Filter: ((a = 20) AND (c = 100) AND (abs(b) = 10))
+ Filter: ((c = 100) AND (abs(b) = 10))
(3 rows)
explain (costs off) select * from mc3p where a > 20;
@@ -829,12 +736,10 @@ explain (costs off) select * from mc3p where a >= 20;
-> Seq Scan on mc3p5
Filter: (a >= 20)
-> Seq Scan on mc3p6
- Filter: (a >= 20)
-> Seq Scan on mc3p7
- Filter: (a >= 20)
-> Seq Scan on mc3p_default
Filter: (a >= 20)
-(9 rows)
+(7 rows)
explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1 and c = 1) or (a = 10 and abs(b) = 5 and c = 10) or (a > 11 and a < 20);
QUERY PLAN
@@ -871,7 +776,6 @@ explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1 and c = 1) or
-------------------------------------------------------------------------------------------------------------------------------------------------------
Append
-> Seq Scan on mc3p0
- Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-> Seq Scan on mc3p1
Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-> Seq Scan on mc3p2
@@ -880,7 +784,7 @@ explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1 and c = 1) or
Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-> Seq Scan on mc3p_default
Filter: (((a = 1) AND (abs(b) = 1) AND (c = 1)) OR ((a = 10) AND (abs(b) = 5) AND (c = 10)) OR ((a > 11) AND (a < 20)) OR (a < 1) OR (a = 1))
-(11 rows)
+(10 rows)
explain (costs off) select * from mc3p where a = 1 or abs(b) = 1 or c = 1;
QUERY PLAN
@@ -917,12 +821,11 @@ explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1) or (a = 10 a
-> Seq Scan on mc3p2
Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-> Seq Scan on mc3p3
- Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-> Seq Scan on mc3p4
Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-> Seq Scan on mc3p_default
Filter: (((a = 1) AND (abs(b) = 1)) OR ((a = 10) AND (abs(b) = 10)))
-(13 rows)
+(12 rows)
explain (costs off) select * from mc3p where (a = 1 and abs(b) = 1) or (a = 10 and abs(b) = 9);
QUERY PLAN
@@ -952,22 +855,18 @@ explain (costs off) select * from mc2p where a < 2;
--------------------------------
Append
-> Seq Scan on mc2p0
- Filter: (a < 2)
-> Seq Scan on mc2p1
- Filter: (a < 2)
-> Seq Scan on mc2p2
- Filter: (a < 2)
-> Seq Scan on mc2p_default
Filter: (a < 2)
-(9 rows)
+(6 rows)
explain (costs off) select * from mc2p where a = 2 and b < 1;
- QUERY PLAN
----------------------------------------
+ QUERY PLAN
+-------------------------
Append
-> Seq Scan on mc2p3
- Filter: ((b < 1) AND (a = 2))
-(3 rows)
+(2 rows)
explain (costs off) select * from mc2p where a > 1;
QUERY PLAN
@@ -976,14 +875,11 @@ explain (costs off) select * from mc2p where a > 1;
-> Seq Scan on mc2p2
Filter: (a > 1)
-> Seq Scan on mc2p3
- Filter: (a > 1)
-> Seq Scan on mc2p4
- Filter: (a > 1)
-> Seq Scan on mc2p5
- Filter: (a > 1)
-> Seq Scan on mc2p_default
Filter: (a > 1)
-(11 rows)
+(8 rows)
explain (costs off) select * from mc2p where a = 1 and b > 1;
QUERY PLAN
@@ -1040,14 +936,12 @@ create table boolpart_default partition of boolpart default;
create table boolpart_t partition of boolpart for values in ('true');
create table boolpart_f partition of boolpart for values in ('false');
explain (costs off) select * from boolpart where a in (true, false);
- QUERY PLAN
-------------------------------------------------
+ QUERY PLAN
+------------------------------
Append
-> Seq Scan on boolpart_f
- Filter: (a = ANY ('{t,f}'::boolean[]))
-> Seq Scan on boolpart_t
- Filter: (a = ANY ('{t,f}'::boolean[]))
-(5 rows)
+(3 rows)
explain (costs off) select * from boolpart where a = false;
QUERY PLAN
@@ -1208,7 +1102,6 @@ explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2
Nested Loop
-> Append
-> Seq Scan on mc2p1 t1
- Filter: (a = 1)
-> Seq Scan on mc2p2 t1_1
Filter: (a = 1)
-> Seq Scan on mc2p_default t1_2
@@ -1233,7 +1126,7 @@ explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2
Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-> Seq Scan on mc3p_default t2_8
Filter: ((a = t1.b) AND (c = 1) AND (abs(b) = 1))
-(28 rows)
+(27 rows)
-- pruning should work fine, because values for a prefix of keys (a, b) are
-- available
@@ -1243,7 +1136,6 @@ explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2
Nested Loop
-> Append
-> Seq Scan on mc2p1 t1
- Filter: (a = 1)
-> Seq Scan on mc2p2 t1_1
Filter: (a = 1)
-> Seq Scan on mc2p_default t1_2
@@ -1256,7 +1148,7 @@ explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2
Filter: ((c = t1.b) AND (a = 1) AND (abs(b) = 1))
-> Seq Scan on mc3p_default t2_2
Filter: ((c = t1.b) AND (a = 1) AND (abs(b) = 1))
-(16 rows)
+(15 rows)
-- also here, because values for all keys are provided
explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2 where t2.a = 1 and abs(t2.b) = 1 and t2.c = 1) s where t1.a = 1;
@@ -1269,12 +1161,11 @@ explain (costs off) select * from mc2p t1, lateral (select count(*) from mc3p t2
Filter: ((a = 1) AND (c = 1) AND (abs(b) = 1))
-> Append
-> Seq Scan on mc2p1 t1
- Filter: (a = 1)
-> Seq Scan on mc2p2 t1_1
Filter: (a = 1)
-> Seq Scan on mc2p_default t1_2
Filter: (a = 1)
-(12 rows)
+(11 rows)
--
-- pruning with clauses containing <> operator
@@ -1289,24 +1180,21 @@ explain (costs off) select * from rp where a <> 1;
--------------------------
Append
-> Seq Scan on rp0
- Filter: (a <> 1)
-> Seq Scan on rp1
Filter: (a <> 1)
-> Seq Scan on rp2
- Filter: (a <> 1)
-(7 rows)
+(5 rows)
explain (costs off) select * from rp where a <> 1 and a <> 2;
- QUERY PLAN
------------------------------------------
+ QUERY PLAN
+--------------------------
Append
-> Seq Scan on rp0
- Filter: ((a <> 1) AND (a <> 2))
-> Seq Scan on rp1
- Filter: ((a <> 1) AND (a <> 2))
+ Filter: (a <> 1)
-> Seq Scan on rp2
- Filter: ((a <> 1) AND (a <> 2))
-(7 rows)
+ Filter: (a <> 2)
+(6 rows)
-- null partition should be eliminated due to strict <> clause.
explain (costs off) select * from lp where a <> 'a';
@@ -1316,38 +1204,32 @@ explain (costs off) select * from lp where a <> 'a';
-> Seq Scan on lp_ad
Filter: (a <> 'a'::bpchar)
-> Seq Scan on lp_bc
- Filter: (a <> 'a'::bpchar)
-> Seq Scan on lp_ef
- Filter: (a <> 'a'::bpchar)
-> Seq Scan on lp_g
- Filter: (a <> 'a'::bpchar)
-> Seq Scan on lp_default
Filter: (a <> 'a'::bpchar)
-(11 rows)
+(8 rows)
-- ensure we detect contradictions in clauses; a can't be NULL and NOT NULL.
explain (costs off) select * from lp where a <> 'a' and a is null;
- QUERY PLAN
---------------------------
- Result
- One-Time Filter: false
-(2 rows)
+ QUERY PLAN
+------------------------------------
+ Append
+ -> Seq Scan on lp_null
+ Filter: (a <> 'a'::bpchar)
+(3 rows)
explain (costs off) select * from lp where (a <> 'a' and a <> 'd') or a is null;
QUERY PLAN
------------------------------------------------------------------------------
Append
-> Seq Scan on lp_bc
- Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-> Seq Scan on lp_ef
- Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-> Seq Scan on lp_g
- Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-> Seq Scan on lp_null
- Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-> Seq Scan on lp_default
Filter: (((a <> 'a'::bpchar) AND (a <> 'd'::bpchar)) OR (a IS NULL))
-(11 rows)
+(7 rows)
-- check that it also works for a partitioned table that's not root,
-- which in this case are partitions of rlp that are themselves
@@ -1357,7 +1239,7 @@ explain (costs off) select * from rlp where a = 15 and b <> 'ab' and b <> 'cd' a
------------------------------------------------------------------------------------------------------------------------------------------
Append
-> Seq Scan on rlp3efgh
- Filter: ((b IS NOT NULL) AND ((b)::text <> 'ab'::text) AND ((b)::text <> 'cd'::text) AND ((b)::text <> 'xy'::text) AND (a = 15))
+ Filter: (a = 15)
-> Seq Scan on rlp3_default
Filter: ((b IS NOT NULL) AND ((b)::text <> 'ab'::text) AND ((b)::text <> 'cd'::text) AND ((b)::text <> 'xy'::text) AND (a = 15))
(5 rows)
@@ -1694,36 +1576,25 @@ execute ab_q1 (1, 8, 3);
(0 rows)
explain (analyze, costs off, summary off, timing off) execute ab_q1 (2, 2, 3);
- QUERY PLAN
----------------------------------------------------------
+ QUERY PLAN
+----------------------------------------------------
Append (actual rows=0 loops=1)
- Subplans Removed: 6
-> Seq Scan on ab_a2_b1 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-> Seq Scan on ab_a2_b2 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-> Seq Scan on ab_a2_b3 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-(8 rows)
+(4 rows)
explain (analyze, costs off, summary off, timing off) execute ab_q1 (1, 2, 3);
- QUERY PLAN
----------------------------------------------------------
+ QUERY PLAN
+----------------------------------------------------
Append (actual rows=0 loops=1)
- Subplans Removed: 3
-> Seq Scan on ab_a1_b1 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-> Seq Scan on ab_a1_b2 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-> Seq Scan on ab_a1_b3 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-> Seq Scan on ab_a2_b1 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-> Seq Scan on ab_a2_b2 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-> Seq Scan on ab_a2_b3 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b <= $3))
-(14 rows)
+(7 rows)
deallocate ab_q1;
-- Runtime pruning after optimizer pruning
@@ -1757,29 +1628,29 @@ execute ab_q1 (1, 8);
(0 rows)
explain (analyze, costs off, summary off, timing off) execute ab_q1 (2, 2);
- QUERY PLAN
--------------------------------------------------------
+ QUERY PLAN
+----------------------------------------------------
Append (actual rows=0 loops=1)
Subplans Removed: 4
-> Seq Scan on ab_a2_b1 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
+ Filter: ((a >= $1) AND (a <= $2))
-> Seq Scan on ab_a2_b2 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
+ Filter: ((a >= $1) AND (a <= $2))
(6 rows)
explain (analyze, costs off, summary off, timing off) execute ab_q1 (2, 4);
- QUERY PLAN
--------------------------------------------------------
+ QUERY PLAN
+----------------------------------------------------
Append (actual rows=0 loops=1)
Subplans Removed: 2
-> Seq Scan on ab_a2_b1 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
+ Filter: ((a >= $1) AND (a <= $2))
-> Seq Scan on ab_a2_b2 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
+ Filter: ((a >= $1) AND (a <= $2))
-> Seq Scan on ab_a3_b1 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
+ Filter: ((a >= $1) AND (a <= $2))
-> Seq Scan on ab_a3_b2 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 3))
+ Filter: ((a >= $1) AND (a <= $2))
(10 rows)
-- Ensure a mix of PARAM_EXTERN and PARAM_EXEC Params work together at
@@ -1812,19 +1683,18 @@ execute ab_q2 (1, 8);
(0 rows)
explain (analyze, costs off, summary off, timing off) execute ab_q2 (2, 2);
- QUERY PLAN
---------------------------------------------------------
+ QUERY PLAN
+----------------------------------------------------
Append (actual rows=0 loops=1)
InitPlan 1 (returns $0)
-> Result (actual rows=1 loops=1)
- Subplans Removed: 6
-> Seq Scan on ab_a2_b1 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b < $0))
+ Filter: (b < $0)
-> Seq Scan on ab_a2_b2 (actual rows=0 loops=1)
- Filter: ((a >= $1) AND (a <= $2) AND (b < $0))
+ Filter: (b < $0)
-> Seq Scan on ab_a2_b3 (never executed)
- Filter: ((a >= $1) AND (a <= $2) AND (b < $0))
-(10 rows)
+ Filter: (b < $0)
+(9 rows)
-- As above, but swap the PARAM_EXEC Param to the first partition level
prepare ab_q3 (int, int) as
@@ -1855,19 +1725,18 @@ execute ab_q3 (1, 8);
(0 rows)
explain (analyze, costs off, summary off, timing off) execute ab_q3 (2, 2);
- QUERY PLAN
---------------------------------------------------------
+ QUERY PLAN
+----------------------------------------------------
Append (actual rows=0 loops=1)
InitPlan 1 (returns $0)
-> Result (actual rows=1 loops=1)
- Subplans Removed: 6
-> Seq Scan on ab_a1_b2 (actual rows=0 loops=1)
- Filter: ((b >= $1) AND (b <= $2) AND (a < $0))
+ Filter: (a < $0)
-> Seq Scan on ab_a2_b2 (actual rows=0 loops=1)
- Filter: ((b >= $1) AND (b <= $2) AND (a < $0))
+ Filter: (a < $0)
-> Seq Scan on ab_a3_b2 (never executed)
- Filter: ((b >= $1) AND (b <= $2) AND (a < $0))
-(10 rows)
+ Filter: (a < $0)
+(9 rows)
-- Test a backwards Append scan
create table list_part (a int) partition by list (a);
@@ -2011,11 +1880,11 @@ select explain_parallel_append('execute ab_q4 (2, 2)');
-> Parallel Append (actual rows=0 loops=N)
Subplans Removed: 6
-> Parallel Seq Scan on ab_a2_b1 (actual rows=0 loops=N)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 4))
+ Filter: ((a >= $1) AND (a <= $2))
-> Parallel Seq Scan on ab_a2_b2 (actual rows=0 loops=N)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 4))
+ Filter: ((a >= $1) AND (a <= $2))
-> Parallel Seq Scan on ab_a2_b3 (actual rows=0 loops=N)
- Filter: ((a >= $1) AND (a <= $2) AND (b < 4))
+ Filter: ((a >= $1) AND (a <= $2))
(13 rows)
-- Test run-time pruning with IN lists.
@@ -2064,11 +1933,11 @@ select explain_parallel_append('execute ab_q5 (1, 1, 1)');
-> Parallel Append (actual rows=0 loops=N)
Subplans Removed: 6
-> Parallel Seq Scan on ab_a1_b1 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
-> Parallel Seq Scan on ab_a1_b2 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
-> Parallel Seq Scan on ab_a1_b3 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
(13 rows)
select explain_parallel_append('execute ab_q5 (2, 3, 3)');
@@ -2082,24 +1951,24 @@ select explain_parallel_append('execute ab_q5 (2, 3, 3)');
-> Parallel Append (actual rows=0 loops=N)
Subplans Removed: 3
-> Parallel Seq Scan on ab_a2_b1 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
-> Parallel Seq Scan on ab_a2_b2 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
-> Parallel Seq Scan on ab_a2_b3 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
-> Parallel Seq Scan on ab_a3_b1 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
-> Parallel Seq Scan on ab_a3_b2 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
-> Parallel Seq Scan on ab_a3_b3 (actual rows=0 loops=N)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
(19 rows)
-- Try some params whose values do not belong to any partition.
-- We'll still get a single subplan in this case, but it should not be scanned.
select explain_parallel_append('execute ab_q5 (33, 44, 55)');
- explain_parallel_append
--------------------------------------------------------------------------------
+ explain_parallel_append
+------------------------------------------------------------------------
Finalize Aggregate (actual rows=1 loops=1)
-> Gather (actual rows=3 loops=1)
Workers Planned: 2
@@ -2108,30 +1977,31 @@ select explain_parallel_append('execute ab_q5 (33, 44, 55)');
-> Parallel Append (actual rows=0 loops=N)
Subplans Removed: 8
-> Parallel Seq Scan on ab_a1_b1 (never executed)
- Filter: ((b < 4) AND (a = ANY (ARRAY[$1, $2, $3])))
+ Filter: (a = ANY (ARRAY[$1, $2, $3]))
(9 rows)
-- Test Parallel Append with PARAM_EXEC Params
select explain_parallel_append('select count(*) from ab where (a = (select 1) or a = (select 3)) and b = 2');
- explain_parallel_append
--------------------------------------------------------------------------
- Aggregate (actual rows=1 loops=1)
+ explain_parallel_append
+-------------------------------------------------------------------------------
+ Finalize Aggregate (actual rows=1 loops=1)
InitPlan 1 (returns $0)
-> Result (actual rows=1 loops=1)
InitPlan 2 (returns $1)
-> Result (actual rows=1 loops=1)
- -> Gather (actual rows=0 loops=1)
+ -> Gather (actual rows=3 loops=1)
Workers Planned: 2
Params Evaluated: $0, $1
Workers Launched: 2
- -> Parallel Append (actual rows=0 loops=N)
- -> Parallel Seq Scan on ab_a1_b2 (actual rows=0 loops=N)
- Filter: ((b = 2) AND ((a = $0) OR (a = $1)))
- -> Parallel Seq Scan on ab_a2_b2 (never executed)
- Filter: ((b = 2) AND ((a = $0) OR (a = $1)))
- -> Parallel Seq Scan on ab_a3_b2 (actual rows=0 loops=N)
- Filter: ((b = 2) AND ((a = $0) OR (a = $1)))
-(16 rows)
+ -> Partial Aggregate (actual rows=1 loops=3)
+ -> Parallel Append (actual rows=0 loops=N)
+ -> Parallel Seq Scan on ab_a1_b2 (actual rows=0 loops=N)
+ Filter: ((a = $0) OR (a = $1))
+ -> Parallel Seq Scan on ab_a2_b2 (never executed)
+ Filter: ((a = $0) OR (a = $1))
+ -> Parallel Seq Scan on ab_a3_b2 (actual rows=0 loops=N)
+ Filter: ((a = $0) OR (a = $1))
+(17 rows)
-- Test pruning during parallel nested loop query
create table lprt_a (a int not null);
@@ -2385,27 +2255,18 @@ select * from ab where a = (select max(a) from lprt_a) and b = (select max(a)-1
-- Test run-time partition pruning with UNION ALL parents
explain (analyze, costs off, summary off, timing off)
select * from (select * from ab where a = 1 union all select * from ab) ab where b = (select 1);
- QUERY PLAN
--------------------------------------------------------------------------------
+ QUERY PLAN
+---------------------------------------------------------------------
Append (actual rows=0 loops=1)
InitPlan 1 (returns $0)
-> Result (actual rows=1 loops=1)
-> Append (actual rows=0 loops=1)
- -> Bitmap Heap Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
- Recheck Cond: (a = 1)
+ -> Seq Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
Filter: (b = $0)
- -> Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b2 ab_a1_b2_1 (never executed)
- Recheck Cond: (a = 1)
+ -> Seq Scan on ab_a1_b2 ab_a1_b2_1 (never executed)
Filter: (b = $0)
- -> Bitmap Index Scan on ab_a1_b2_a_idx (never executed)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b3 ab_a1_b3_1 (never executed)
- Recheck Cond: (a = 1)
+ -> Seq Scan on ab_a1_b3 ab_a1_b3_1 (never executed)
Filter: (b = $0)
- -> Bitmap Index Scan on ab_a1_b3_a_idx (never executed)
- Index Cond: (a = 1)
-> Seq Scan on ab_a1_b1 (actual rows=0 loops=1)
Filter: (b = $0)
-> Seq Scan on ab_a1_b2 (never executed)
@@ -2424,32 +2285,23 @@ select * from (select * from ab where a = 1 union all select * from ab) ab where
Filter: (b = $0)
-> Seq Scan on ab_a3_b3 (never executed)
Filter: (b = $0)
-(37 rows)
+(28 rows)
-- A case containing a UNION ALL with a non-partitioned child.
explain (analyze, costs off, summary off, timing off)
select * from (select * from ab where a = 1 union all (values(10,5)) union all select * from ab) ab where b = (select 1);
- QUERY PLAN
--------------------------------------------------------------------------------
+ QUERY PLAN
+---------------------------------------------------------------------
Append (actual rows=0 loops=1)
InitPlan 1 (returns $0)
-> Result (actual rows=1 loops=1)
-> Append (actual rows=0 loops=1)
- -> Bitmap Heap Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
- Recheck Cond: (a = 1)
+ -> Seq Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
Filter: (b = $0)
- -> Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b2 ab_a1_b2_1 (never executed)
- Recheck Cond: (a = 1)
+ -> Seq Scan on ab_a1_b2 ab_a1_b2_1 (never executed)
Filter: (b = $0)
- -> Bitmap Index Scan on ab_a1_b2_a_idx (never executed)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b3 ab_a1_b3_1 (never executed)
- Recheck Cond: (a = 1)
+ -> Seq Scan on ab_a1_b3 ab_a1_b3_1 (never executed)
Filter: (b = $0)
- -> Bitmap Index Scan on ab_a1_b3_a_idx (never executed)
- Index Cond: (a = 1)
-> Result (actual rows=0 loops=1)
One-Time Filter: (5 = $0)
-> Seq Scan on ab_a1_b1 (actual rows=0 loops=1)
@@ -2470,7 +2322,7 @@ select * from (select * from ab where a = 1 union all (values(10,5)) union all s
Filter: (b = $0)
-> Seq Scan on ab_a3_b3 (never executed)
Filter: (b = $0)
-(39 rows)
+(30 rows)
deallocate ab_q1;
deallocate ab_q2;
@@ -2489,19 +2341,9 @@ update ab_a1 set b = 3 from ab where ab.a = 1 and ab.a = ab_a1.a;
Update on ab_a1_b3
-> Nested Loop (actual rows=0 loops=1)
-> Append (actual rows=1 loops=1)
- -> Bitmap Heap Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
- Recheck Cond: (a = 1)
- -> Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b2 ab_a1_b2_1 (actual rows=1 loops=1)
- Recheck Cond: (a = 1)
- Heap Blocks: exact=1
- -> Bitmap Index Scan on ab_a1_b2_a_idx (actual rows=1 loops=1)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b3 ab_a1_b3_1 (actual rows=0 loops=1)
- Recheck Cond: (a = 1)
- -> Bitmap Index Scan on ab_a1_b3_a_idx (actual rows=0 loops=1)
- Index Cond: (a = 1)
+ -> Seq Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
+ -> Seq Scan on ab_a1_b2 ab_a1_b2_1 (actual rows=1 loops=1)
+ -> Seq Scan on ab_a1_b3 ab_a1_b3_1 (actual rows=0 loops=1)
-> Materialize (actual rows=0 loops=1)
-> Bitmap Heap Scan on ab_a1_b1 (actual rows=0 loops=1)
Recheck Cond: (a = 1)
@@ -2509,19 +2351,9 @@ update ab_a1 set b = 3 from ab where ab.a = 1 and ab.a = ab_a1.a;
Index Cond: (a = 1)
-> Nested Loop (actual rows=1 loops=1)
-> Append (actual rows=1 loops=1)
- -> Bitmap Heap Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
- Recheck Cond: (a = 1)
- -> Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b2 ab_a1_b2_1 (actual rows=1 loops=1)
- Recheck Cond: (a = 1)
- Heap Blocks: exact=1
- -> Bitmap Index Scan on ab_a1_b2_a_idx (actual rows=1 loops=1)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b3 ab_a1_b3_1 (actual rows=0 loops=1)
- Recheck Cond: (a = 1)
- -> Bitmap Index Scan on ab_a1_b3_a_idx (actual rows=1 loops=1)
- Index Cond: (a = 1)
+ -> Seq Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
+ -> Seq Scan on ab_a1_b2 ab_a1_b2_1 (actual rows=1 loops=1)
+ -> Seq Scan on ab_a1_b3 ab_a1_b3_1 (actual rows=0 loops=1)
-> Materialize (actual rows=1 loops=1)
-> Bitmap Heap Scan on ab_a1_b2 (actual rows=1 loops=1)
Recheck Cond: (a = 1)
@@ -2530,25 +2362,15 @@ update ab_a1 set b = 3 from ab where ab.a = 1 and ab.a = ab_a1.a;
Index Cond: (a = 1)
-> Nested Loop (actual rows=0 loops=1)
-> Append (actual rows=1 loops=1)
- -> Bitmap Heap Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
- Recheck Cond: (a = 1)
- -> Bitmap Index Scan on ab_a1_b1_a_idx (actual rows=0 loops=1)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b2 ab_a1_b2_1 (actual rows=1 loops=1)
- Recheck Cond: (a = 1)
- Heap Blocks: exact=1
- -> Bitmap Index Scan on ab_a1_b2_a_idx (actual rows=1 loops=1)
- Index Cond: (a = 1)
- -> Bitmap Heap Scan on ab_a1_b3 ab_a1_b3_1 (actual rows=0 loops=1)
- Recheck Cond: (a = 1)
- -> Bitmap Index Scan on ab_a1_b3_a_idx (actual rows=1 loops=1)
- Index Cond: (a = 1)
+ -> Seq Scan on ab_a1_b1 ab_a1_b1_1 (actual rows=0 loops=1)
+ -> Seq Scan on ab_a1_b2 ab_a1_b2_1 (actual rows=1 loops=1)
+ -> Seq Scan on ab_a1_b3 ab_a1_b3_1 (actual rows=0 loops=1)
-> Materialize (actual rows=0 loops=1)
-> Bitmap Heap Scan on ab_a1_b3 (actual rows=0 loops=1)
Recheck Cond: (a = 1)
-> Bitmap Index Scan on ab_a1_b3_a_idx (actual rows=1 loops=1)
Index Cond: (a = 1)
-(65 rows)
+(35 rows)
table ab;
a | b
@@ -3155,12 +2977,11 @@ create table pp_arrpart (a int[]) partition by list (a);
create table pp_arrpart1 partition of pp_arrpart for values in ('{1}');
create table pp_arrpart2 partition of pp_arrpart for values in ('{2, 3}', '{4, 5}');
explain (costs off) select * from pp_arrpart where a = '{1}';
- QUERY PLAN
-----------------------------------------
+ QUERY PLAN
+-------------------------------
Append
-> Seq Scan on pp_arrpart1
- Filter: (a = '{1}'::integer[])
-(3 rows)
+(2 rows)
explain (costs off) select * from pp_arrpart where a = '{1, 2}';
QUERY PLAN
@@ -3174,10 +2995,9 @@ explain (costs off) select * from pp_arrpart where a in ('{4, 5}', '{1}');
----------------------------------------------------------------------
Append
-> Seq Scan on pp_arrpart1
- Filter: ((a = '{4,5}'::integer[]) OR (a = '{1}'::integer[]))
-> Seq Scan on pp_arrpart2
Filter: ((a = '{4,5}'::integer[]) OR (a = '{1}'::integer[]))
-(5 rows)
+(4 rows)
explain (costs off) update pp_arrpart set a = a where a = '{1}';
QUERY PLAN
@@ -3244,12 +3064,11 @@ create table pp_enumpart (a pp_colors) partition by list (a);
create table pp_enumpart_green partition of pp_enumpart for values in ('green');
create table pp_enumpart_blue partition of pp_enumpart for values in ('blue');
explain (costs off) select * from pp_enumpart where a = 'blue';
- QUERY PLAN
------------------------------------------
+ QUERY PLAN
+------------------------------------
Append
-> Seq Scan on pp_enumpart_blue
- Filter: (a = 'blue'::pp_colors)
-(3 rows)
+(2 rows)
explain (costs off) select * from pp_enumpart where a = 'black';
QUERY PLAN
@@ -3266,12 +3085,11 @@ create table pp_recpart (a pp_rectype) partition by list (a);
create table pp_recpart_11 partition of pp_recpart for values in ('(1,1)');
create table pp_recpart_23 partition of pp_recpart for values in ('(2,3)');
explain (costs off) select * from pp_recpart where a = '(1,1)'::pp_rectype;
- QUERY PLAN
--------------------------------------------
+ QUERY PLAN
+---------------------------------
Append
-> Seq Scan on pp_recpart_11
- Filter: (a = '(1,1)'::pp_rectype)
-(3 rows)
+(2 rows)
explain (costs off) select * from pp_recpart where a = '(1,2)'::pp_rectype;
QUERY PLAN
@@ -3287,12 +3105,11 @@ create table pp_intrangepart (a int4range) partition by list (a);
create table pp_intrangepart12 partition of pp_intrangepart for values in ('[1,2]');
create table pp_intrangepart2inf partition of pp_intrangepart for values in ('[2,)');
explain (costs off) select * from pp_intrangepart where a = '[1,2]'::int4range;
- QUERY PLAN
-------------------------------------------
+ QUERY PLAN
+-------------------------------------
Append
-> Seq Scan on pp_intrangepart12
- Filter: (a = '[1,3)'::int4range)
-(3 rows)
+(2 rows)
explain (costs off) select * from pp_intrangepart where a = '(1,2)'::int4range;
QUERY PLAN
@@ -3313,8 +3130,7 @@ explain (costs off) select * from pp_lp where a = 1;
--------------------------
Append
-> Seq Scan on pp_lp1
- Filter: (a = 1)
-(3 rows)
+(2 rows)
explain (costs off) update pp_lp set value = 10 where a = 1;
QUERY PLAN
@@ -3341,10 +3157,9 @@ explain (costs off) select * from pp_lp where a = 1;
--------------------------
Append
-> Seq Scan on pp_lp1
- Filter: (a = 1)
-> Seq Scan on pp_lp2
Filter: (a = 1)
-(5 rows)
+(4 rows)
explain (costs off) update pp_lp set value = 10 where a = 1;
QUERY PLAN
@@ -3376,10 +3191,9 @@ explain (costs off) select * from pp_lp where a = 1;
--------------------------
Append
-> Seq Scan on pp_lp1
- Filter: (a = 1)
-> Seq Scan on pp_lp2
Filter: (a = 1)
-(5 rows)
+(4 rows)
explain (costs off) update pp_lp set value = 10 where a = 1;
QUERY PLAN
@@ -3509,15 +3323,15 @@ from (
select 1, 1, 1
) s(a, b, c)
where s.a = 1 and s.b = 1 and s.c = (select 1);
- QUERY PLAN
-----------------------------------------------------
+ QUERY PLAN
+----------------------------------------
Append
InitPlan 1 (returns $0)
-> Result
-> Seq Scan on p1
- Filter: ((a = 1) AND (b = 1) AND (c = $0))
+ Filter: ((b = 1) AND (c = $0))
-> Seq Scan on q111
- Filter: ((a = 1) AND (b = 1) AND (c = $0))
+ Filter: (c = $0)
-> Result
One-Time Filter: (1 = $0)
(9 rows)
diff --git a/src/test/regress/expected/rowsecurity.out b/src/test/regress/expected/rowsecurity.out
index bc16ca4..08a3b41 100644
--- a/src/test/regress/expected/rowsecurity.out
+++ b/src/test/regress/expected/rowsecurity.out
@@ -1057,14 +1057,14 @@ NOTICE: f_leak => awesome science fiction
(4 rows)
EXPLAIN (COSTS OFF) SELECT * FROM part_document WHERE f_leak(dtitle);
- QUERY PLAN
---------------------------------------------------------------------
+ QUERY PLAN
+-----------------------------------------------------
Append
InitPlan 1 (returns $0)
-> Index Scan using uaccount_pkey on uaccount
Index Cond: (pguser = CURRENT_USER)
-> Seq Scan on part_document_fiction
- Filter: ((cid < 55) AND (dlevel <= $0) AND f_leak(dtitle))
+ Filter: ((dlevel <= $0) AND f_leak(dtitle))
(6 rows)
-- pp1 ERROR
@@ -1136,14 +1136,14 @@ NOTICE: f_leak => awesome science fiction
(4 rows)
EXPLAIN (COSTS OFF) SELECT * FROM part_document WHERE f_leak(dtitle);
- QUERY PLAN
---------------------------------------------------------------------
+ QUERY PLAN
+-----------------------------------------------------
Append
InitPlan 1 (returns $0)
-> Index Scan using uaccount_pkey on uaccount
Index Cond: (pguser = CURRENT_USER)
-> Seq Scan on part_document_fiction
- Filter: ((cid < 55) AND (dlevel <= $0) AND f_leak(dtitle))
+ Filter: ((dlevel <= $0) AND f_leak(dtitle))
(6 rows)
-- viewpoint from regress_rls_carol
