From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Derrick
Sent: Tuesday, December 19, 2006 5:52 PM
To: pgsql-general@postgresql.org
Subject: [GENERAL] postgres kerberos how to
I was wondering if anyone out there could point me in the
right direction. I'm looking for a decent how to on using
postgresql's built in kerberos support to authenticate
against windows 2003 active directory. I was trying to use
pam_ldap, but had to give up and decide on using kerberos
instead. Any help what so ever is much appreciated.
Thanks.
Derrick,
We've been setting it up in our shop and it's been a bit of a bear. We're
connecting to PG through the ODBC driver using both PG 8.1 and 8.2. Below are
the steps we've taken to get it to work with a Windows 2003 Domain Controller
and Windows 2003 Server running Terminal Services which serves the front end.
We have had greater success with Windows 2003 Server R2, though we have been
able to get it to work with Windows 2000 Server and Windows 2003 server. We
also needed to use MIT's Net ID manager.
It would great if others could point to ways that we could simplify these
steps. I wasn't the one here who implemented things, so one of my colleagues
may need to followup if there are specific questions. Additionally, we have not
looked into the suggestion that Magnus made that 8.2's LDAP support could help
solve this problem of AD integration from a slightly different direction.
-Matt
Kerberos Configuration Steps
**************************
PG Server=fauxacacia
Active Directory Domain=faux.com
Active Directory Domain Controller=fauxsol
Windows 2003 Server R2 (Terminal Services server, in our case, used to serve
our front end)=fauxsaturn
On Domain Controller: fauxsol(Windows 2003)
* Add entries to Domain Controller/DNS for all relevant servers so that all
principals can contact each other by name.
192.168.4.26 fauxsol fauxsol.faux.com
192.168.4.28 fauxacacia fauxacacia.faux.com
192.168.4.29 fauxsaturn fauxsaturn.faux.com
On PG Server: fauxacacia(Linux)
Samba
* Install Samba to facilitate copying of keytab file from Windows Domain Controller
NTP (Network Time Protocol to make sure that servers stay with same time,
required with Kerberos)
* Install package, ntpdate
* Edit '/etc/default/ntpdate' to point to the Windows Domain Controller/KDC Server
# servers to check. (Separate multiple servers with spaces.)
#NTPSERVERS="pool.ntp.org"
#NTPSERVERS="ntp.ubuntu.com"
NTPSERVERS="fauxsol"
#
# additional options for ntpdate
#NTPOPTIONS="-v"
NTPOPTIONS="-u"
* Add an hourly cron entry, '/etc/cron.hourly/ntpdate', and make it executable, 'chmod ugo+x /etc/cron.hourly/ntpdate'
#!/bin/sh
NTPDATE=/usr/sbin/ntpdate
NTPDEFAULTS=/etc/default/ntpdate
NTPFALLBACK="ntp.ubuntu.com"
if [ -f "$NTPDEFAULTS" ]; then
. $NTPDEFAULTS
test -n "$NTPSERVERS" || NTPSERVERS=$NTPFALLBACK
else
NTPSERVERS=$NTPFALLBACK
fi
if [ -x "$NTPDATE" ]; then
$NTPDATE -s $NTPOPTIONS $NTPSERVERS
fi
* Restart cron, '/etc/init.d/cron restart'
MIT Kerberos Library
* Install Kerberos Libraries
krb5-config, krb5-user
* Edit Kerberos config files ('/etc/krb5.conf')
[libdefaults]
default_realm = [faux.com]
krb4_config = /etc/krb.conf
krb4_realms = /etc/krb.realms
kdc_timesync = 1
ccache_type = 4
forwardable = true
proxiable = true
[realms]
FAUX.COM = {
kdc = [fauxsol]
admin_server = [fauxsol]
}
DNS
* Edit DNS settings file ('/etc/resolv.conf')
nameserver [ip address of DNS server 1]
nameserver [ip address of DNS server 2]
On Domain Controller: fauxsol (Windows 2003)
* Install Windows Supporting Tools (ktpass), found on Windows installation
CD as SUPPORT\TOOLS\SUPTOOLS.MSI
* Map PG on database server as a user in Active Directory
o Create user account in AD for PG service
ie. 'postgres_fauxacacia'
o Make keytab file with AD PG user account. This will also map the user to the service.
ktpass princ postgres/[EMAIL PROTECTED] -mapuser postgres_fauxacacia +rndPass
-out postgres_fauxacacia.keytab -target fauxsol -ptype KRB5_NT_PRINCIPAL
[edit]
On PG Server: fauxacacia (Linux)
* Move keytab file to PG Server (Linux).
'/usr/local/pgsql/etc/krb5.keytab' and '/etc/krb5.keytab'
* Secure keytab files
o 'chown postgres:postgres /usr/local/pgsql/etc/krb5.keytab'
o 'chmod ugo-wx /usr/local/pgsql/etc/krb5.keytab' - Files created by
samba have executable bit set for user.
o 'chmod go-r /usr/local/pgsql/etc/krb5.keytab'
* Configure PG to use '/usr/local/pgsql/etc/krb5.keytab'
# Kerberos
krb_server_keyfile = '/usr/local/pgsql/etc/krb5.keytab' #
(change requires restart)
#krb_srvname = 'postgres' # (change requires restart)
#krb_server_hostname = '' # empty string matches any keytab entry
# (change requires restart)
#krb_caseins_users = off # (change requires restart)
* Restart PG
[edit]
On Front End Server: fauxsaturn (Windows 2003)
* Install MIT Kerberos For Windows
o Make sure that Net ID Manager is configured to start when user logs in(default).
* Create 'C:\Program Files\MIT\Kerberos\bin\krb5.ini':
[libdefaults]
default_realm = FAUX.COM
kdc_timesync = 1
ccache_type = 4
ticket_lifetime = 36000
[realms]
FAUX.COM = {
kdc = FAUXSOL
admin_server = FAUXSOL
}
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
* Delete all krb5_32.dll's other than the one in the MIT\Kerberos\bin
folder.
ie. 'C:\Program Files\psqlODBC\0802\bin' or 'C:\Program Files\pgAdmin III\1.6'
o This ensures that all client side PG Kerberos authentication will
occur via the just installed MIT Kerberos for Windows package.
o The secondary, desired effect is that only the one
MIT\Kerberos\bin\krb5.ini file is used.
o NOTE: This is just for our Terminal Services environment: If the
krb5.ini file is placed in 'C:\Windows', then Kerberos authentication will fail
unless the session is in install mode('change user /install'). This is because
of the virtualized copy of the C:\Windows directory that is created in a
Terminal Services Session. In particular, INI files are managed by a sync
process between the virtual/personal Windows directory and the real one.
Entering install mode points the user's session to the _real_ Windows directory.
+ As long as there is the one 'C:\Program Files\MIT\Kerberos\bin\krb5_32.dll' and the one 'C:\Program Files\MIT\Kerberos\bin\krb5.ini', there 'change user /install' should not be necesssary.
