Thanks Bill and Paul I'll look at those solutions. I have some alcohol here somewhere, also have rubbing alcohol too.:-)
Dave On Fri, Jan 31, 2020 at 2:17 PM Paul Sorenson <[email protected]> wrote: > Could very well be build-up on the feed roller(s). If the rollers don't > grab the paper right in order to feed it into the correct position the > sensor just tells the machine to eject the paper. > > On my R2000 there's only on driven roller, all the rest are merely > guides. Use an alcohol pad or small piece of cloth saturated with > rubbing alcohol held against the feed roller(s) and press the paper feed > button. Do that a couple times and you should get the roller pretty > clean. Happens with all papers but is most prevalent when you print a > bunch on matte paper. > > -p > > On 1/31/2020 8:29 AM, David J Brooks wrote: > > For quite a while now when i go to print something on my Epson 2400 it > just > > feeds sheets through the machine. It does this for anywhere from 3-6 > times > > and then it will grab the paper normally and print > > > > Any ideas as to why. Rolls dirty, wore out ?? communication issues.?? > > > > Dave > > > -- > Paul Sorenson > Studio1941 > > Sooner or later "different" scares people. > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > to UNSUBSCRIBE from the PDML, please visit the link directly above and > follow the directions. > -- Documenting Life in Rural Ontario. www.caughtinmotion.com http://brooksinthecountry.blogspot.com/ York Region, Ontario, Canada -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net to UNSUBSCRIBE from the PDML, please visit the link directly above and follow the directions.
