Could very well be build-up on the feed roller(s). If the rollers don't
grab the paper right in order to feed it into the correct position the
sensor just tells the machine to eject the paper.
On my R2000 there's only on driven roller, all the rest are merely
guides. Use an alcohol pad or small piece of cloth saturated with
rubbing alcohol held against the feed roller(s) and press the paper feed
button. Do that a couple times and you should get the roller pretty
clean. Happens with all papers but is most prevalent when you print a
bunch on matte paper.
-p
On 1/31/2020 8:29 AM, David J Brooks wrote:
For quite a while now when i go to print something on my Epson 2400 it just
feeds sheets through the machine. It does this for anywhere from 3-6 times
and then it will grab the paper normally and print
Any ideas as to why. Rolls dirty, wore out ?? communication issues.??
Dave
--
Paul Sorenson
Studio1941
Sooner or later "different" scares people.
--
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
