Thanks for the info Bill.Looks like a trip to 
Home Depot/Henrys/Aarons for trays etc.
BTW i had some proofs done of the IR roll 
taken last month.I think 2-3 are worthy of a 
scan and insertion on my site.The ones of the 
tree/wire look very eerie Aaron.

dave

---- Begin Original Message ----

From: "Bill D. Casselberry" 
<[EMAIL PROTECTED]>
Sent: Fri, 03 May 2002 07:39:31 -0700
To: [EMAIL PROTECTED]
Subject: Re: Sorry,more home proccessing


�David wrote:
 
> > Hi all.I am going to assume that one pre 
mixes
> > his or her chemicals for home developing 
prior
> > to starting the proccess.

        Yes - you mix up the bagful of chems 
first. I use
        those plastic gallon or 1/2 gallon 
fruit juice jugs
        and keep'em in a dark closet.

> > My ??? to those is,whaat do you use as far 
as
> > chemical holders and what is a good way to 
get
> > the chemicals,rinse water etc to the
> > recommended temps

        For the amounts used in the developing 
tank, I use wide-
        mouth salsa jars or similar for easy 
return of stop, fixer
        & hypo-clearing solutions. I discard 
developer after one use.

        To bring all chems up to temperature I 
use a simple water
        bath in a container in the bathtub. I 
fill it enough that it
        surrounds the jars well and run 
it "warm to the touch". I put
        the thermometer in w/ the jars and read 
the temp after things
        have stabilized (~15-20 minutes). Then 
I use that time/temp
        data from the film's info-sheet for 
developing, removing each
        solution as needed. The temp seems to 
stay close enough thru
        the different steps. I do check the 
actual developer temp
        itself before deciding on the 
developing time, though.

        Care should be taken - but it's 
not "rocket science" � ;^)

        Bill

 � � � �----------------------------------------
-----------------
 � � � �Bill D. Casselberry ; Photography on 
the Oregon Coast

 � � � � � � � � � � � � � � � �http://www.oredn
et.org/~bcasselb
 � � � � � � � � � � � � � � � �bcasselb@orednet
.org
 � � � �----------------------------------------
-----------------
-
This message is from the Pentax-Discuss Mail 
List. �To unsubscribe,
go to http://www.pdml.net and follow the 
directions. Don't forget to
visit the Pentax Users' Gallery at 
http://pug.komkon.org .



---- End Original Message ----




Pentax User
Stouffville Ontario Canada
http://home.ca.inter.net/brooksdj

Sign up today for your Free E-mail at: http://www.canoe.ca/CanoeMail 
-
This message is from the Pentax-Discuss Mail List.  To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .

Reply via email to