I have about 5 of the Transcends and all are a little tight but can be manipulated as John stated. I have also purchased a PQI 2 gb card along with 2 Kingston 2 gb cards. All exhibit just a little tightness in the K10D.
-- Best regards, Bruce Wednesday, June 20, 2007, 10:10:09 PM, you wrote: JF> On Wed, Jun 20, 2007 at 09:46:38PM -0400, Mark Cassino wrote: >> I know that these cards have gotten somewhat mixed reviews (though the >> positive comments far outweigh the negatives.) Well, today I received >> two new 2 gig Transcend cards from NewEgg. I had pressed my slowest SD >> card card into service as a Jumpboost device on my laptop, and decided >> to replace it with a 2 gig Transcend 150x and add another Transcend card >> to boot. For the last several months I've been using 2 Transcend cards >> without problems. >> >> Well, BOTH of the new cards popped into the K10D and promptly jammed >> into place. I could press them into the slot but they never gave the >> slight click-back up, which enables you to click them down and out. I >> managed to extract both with the help of some needle nose pliers. JF> I've just got a couple of new Transcend cards (one to replace the one JF> that was lost when my camera was stolen, and another one as a spare), JF> and both of those are a little tight in the K10D slot, but can easily JF> be removed just by using a thumbnail in the groove at the card edge. -- PDML Pentax-Discuss Mail List PDML@pdml.net http://pdml.net/mailman/listinfo/pdml_pdml.net
