ok stuart, I will write you tomorrow.
Joe On Thu, 4 Jun 2015 16:49:12 +0100 stewartross <stewartr...@sky.com> wrote: hi jo i still haven't got the problem with the encoders sorted stew from the ross meister www.laserhothits.co.uk ----- Original Message ----- From: "Joe Paton" <j...@vi-ability.demon.co.uk> To: "PC Audio Discussion List" <pc-audio@pc-audio.org> Sent: Saturday, May 30, 2015 3:13 PM Subject: Re: another issue has come up > stuart, Have you got this sorted now? > > Joe > On Wed, 27 May 2015 22:38:43 +0100 > stewartross <stewartr...@sky.com> wrote: > > hi jo just saw your posting re sam encoders > ok hears the problem i have > i am using sam broadcaster > i am only using the encoder part of it to stream > ok i am trying to set a new encoder up and the most that i can get to is > > wen it says choose format button press the space bar, wen i go to do this > > pressing the space bar nothing happens > so i can't choose the format or the sample or bit rate what can i do? > using jaws 14 windows 7 64 bit > from stew > from the ross meister > www.laserhothits.co.uk > ----- Original Message ----- From: "Joe Paton" > <j...@vi-ability.demon.co.uk> > To: "PC Audio Discussion List" <pc-audio@pc-audio.org> > Sent: Wednesday, May 27, 2015 9:19 PM > Subject: Re: another issue has come up > > >> Mike, >> >> here's what I do. >> >> Start the sam encoders. >> >> press the application key, and select "new ins." >> If you have an encoder set already, and focus is on that one, select > >> >> config. >> >> If you are on a new instance, then as you have done, select mp3 and mp3 > >> >> pro. >> Then after hitting the ok button, You should be in a converter window, > >> >> which is one of three.the other tabs are server details and stream > >> >> archive. >> >> If you don't see these tab controls, then something may be wrong with the >> installation. >> >> Did you enter the authorization key or whatever they call it in sam? >> >> good luck >> Joe >> >> >> >> >> On Wed, 27 May 2015 12:40:49 -0400 >> Mike Bernard <mbern6...@aol.com> wrote: >> >> Hello again everyone, >> >> I finally got Winamp 5.666 back up and running again, however, now I'm in >> the process of trying to setup my encoders in sam. The only problem is, > >> >> you >> know how when you select the new ins options from the applications menu > >> >> and >> choose mp3 and mp3 pro? This is where I'm having trouble. There's usually >> >> > a >> focuss issue with that window, and so what I do is press spacebar on mp3 >> >> > and >> mp3 pro, and then using my numpad arrows, I press numpad 3 to move the >> virtual mouse down to the bottom right, then press insert numpad 7 until >> I >> get to the ok an cancel buttons, and left-click on ok, which normally > >> >> takes >> me into the next window, where I can select options for the server >> information, converter, streaming bit rate ETC. However, for some reason, >> >> > I >> can't seem to get to the ok or cancel buttons. I know that they are > >> >> present >> on the screen, but I can seem to get to them accessibly. What can I do? >> >> Mike >> >> Rochester, NY. >> >> P.S. other than this minor issue with sam encoder, (at least I hope it's >> minor), winamp is working fine otherwise. >> >> -- > Joe Paton <j...@vi-ability.demon.co.uk> >> >> > > -- > Joe Paton <j...@vi-ability.demon.co.uk> > > -- Joe Paton <j...@vi-ability.demon.co.uk>
