stuart, Have you got this sorted now? Joe On Wed, 27 May 2015 22:38:43 +0100 stewartross <stewartr...@sky.com> wrote:
hi jo just saw your posting re sam encoders ok hears the problem i have i am using sam broadcaster i am only using the encoder part of it to stream ok i am trying to set a new encoder up and the most that i can get to is wen it says choose format button press the space bar, wen i go to do this pressing the space bar nothing happens so i can't choose the format or the sample or bit rate what can i do? using jaws 14 windows 7 64 bit from stew from the ross meister www.laserhothits.co.uk ----- Original Message ----- From: "Joe Paton" <j...@vi-ability.demon.co.uk> To: "PC Audio Discussion List" <pc-audio@pc-audio.org> Sent: Wednesday, May 27, 2015 9:19 PM Subject: Re: another issue has come up > Mike, > > here's what I do. > > Start the sam encoders. > > press the application key, and select "new ins." > If you have an encoder set already, and focus is on that one, select > config. > > If you are on a new instance, then as you have done, select mp3 and mp3 > pro. > Then after hitting the ok button, You should be in a converter window, > > which is one of three.the other tabs are server details and stream > archive. > > If you don't see these tab controls, then something may be wrong with the > installation. > > Did you enter the authorization key or whatever they call it in sam? > > good luck > Joe > > > > > On Wed, 27 May 2015 12:40:49 -0400 > Mike Bernard <mbern6...@aol.com> wrote: > > Hello again everyone, > > I finally got Winamp 5.666 back up and running again, however, now I'm in > the process of trying to setup my encoders in sam. The only problem is, > you > know how when you select the new ins options from the applications menu > and > choose mp3 and mp3 pro? This is where I'm having trouble. There's usually > a > focuss issue with that window, and so what I do is press spacebar on mp3 > and > mp3 pro, and then using my numpad arrows, I press numpad 3 to move the > virtual mouse down to the bottom right, then press insert numpad 7 until I > get to the ok an cancel buttons, and left-click on ok, which normally > takes > me into the next window, where I can select options for the server > information, converter, streaming bit rate ETC. However, for some reason, > I > can't seem to get to the ok or cancel buttons. I know that they are > present > on the screen, but I can seem to get to them accessibly. What can I do? > > Mike > > Rochester, NY. > > P.S. other than this minor issue with sam encoder, (at least I hope it's > minor), winamp is working fine otherwise. > > -- > Joe Paton <j...@vi-ability.demon.co.uk> > > -- Joe Paton <j...@vi-ability.demon.co.uk>
