I have seen DVDs like that, but not CDS.
  John Price.

----- Original Message ----- 
From: "Walter Ramage" <[EMAIL PROTECTED]>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Tuesday, September 11, 2007 7:48 AM
Subject: RE: Identifying the playing surface and non playing surface of a CD


> That's very unusual.  In all the years I have been using CDs I have never
> once had that experience.  The only thing I can suggest is if you have 
> that
> experience again is to find the side with the groove and that will be the
> non playing surface.  The groove is necessary for the CD recorder or Drive
> to identify the type of disc and then to calibrate itself.  The only other
> thing I can think of is that in spindle tubs of CDS there is often a dummy
> disc at either end to protect the real discs and maybe you are feeling 
> that
> dummy.  Walter
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Kenneth Suratt
> Sent: 11 September 2007 12:28
> To: PC Audio Discussion List
> Subject: Re: Identifying the playing surface and non playing surface of
> a CD
>
>
> some times I gat a cd with a raise circle on both sides. How can I tell 
> the
> different?
> ----- Original Message -----
> From: "Walter Ramage" <[EMAIL PROTECTED]>
> To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
> Sent: Tuesday, September 11, 2007 4:06 AM
> Subject: Identifying the playing surface and non playing surface of a CD
>
>
>> Ok.  Here's the best way to identify the playing surface and non playing
>> surface of a CD.  Braille readers will be able to use their finger tips
>> but
>> for those who have sensitivity problems use your finger nail but very
>> carefully.  Probably the easiest way to do this, if you are doing it for
>> the
>> first time  is to place the disc in the case.  From the centre of the 
>> disc
>> slowly run your finger nail towards the outer edge of the disc.  About
>> half
>> an inch from the spindle hole you will find a deep groove, your finger
>> nail
>> will pick this up.  This is the non playing surface.  Now if you turn the
>> disc up the other way and again slowly and gently run your finger nail
>> from
>> the centre towards the outer edge about half an inch from the centre you
>> will find a ridge.  Depending on the brand of the disc the ridge will 
>> vary
>> in how pronounced it is but it is there and It is a ridge.  This is the
>> playing surface.  Once you get used to feeling it then you will know at a
>> very brief touch which side is which.  Walter.
>>
>>
>>
>>
>>
>> Audio List Help, Guidelines, Archives and more...
>> http://www.pc-audio.org
>>
>> To unsubscribe from this list, send a blank email to:
>> [EMAIL PROTECTED]
>>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
>
> Audio List Help, Guidelines, Archives and more...
> http://www.pc-audio.org
>
> To unsubscribe from this list, send a blank email to:
> [EMAIL PROTECTED]
>
>
>
>
>
>
> Audio List Help, Guidelines, Archives and more...
> http://www.pc-audio.org
>
> To unsubscribe from this list, send a blank email to:
> [EMAIL PROTECTED]
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.485 / Virus Database: 269.13.13/998 - Release Date: 9/10/2007 
> 8:48 AM
>
> 



Audio List Help, Guidelines, Archives and more... 
http://www.pc-audio.org

To unsubscribe from this list, send a blank email to: 
[EMAIL PROTECTED]

Reply via email to