Hi Chuck, yes it really does sound good, and they are responsive. I wrote to them, partly because I did have questions but also because I wanted to see if they would bother answering me. Here's what I wrote.
Hi, your 100 MW transmitter sounds superb, and I have a couple of questions. If these are explained through a user guide, I'd be happy to receive it. 1. Is there any control of the volume of the input source at the transmitter end, or does this have to be done entirely from the output of the device that is connected to it? 2. Could you describe in greater detail how the frequency is set? I'm totally blind and it sounds based on the short description that I could set it without difficulty but I'd like to be sure. 3. How much would it cost to ship one to new Zealand where I am from? Thanks for your help. Jonathan Here's what they wrote back. Hi Jonathan, This unit does not come standard with a volume control but we can install one for $25USD. This is not nessasary if you use and audio source that you can adjust but is very important if you intend to use audio sources with fixed level line outputs. The frequency is changed by using a pushing a paper clip to push the small recessed buttons on the front panel. Alternatively we can install 2 small push buttons on the front panel for and extra $10. The transmitter is fairly small so the shipping is only $33 by surface insured mail or $49 by Xpresspost insured. I highly recommend Xpresspost since it is trackable and only take 5-7 business days to most locations. Surface mail can take up to 3 months in some cases. Best regards, Dave TEL: 416-243-2260 http://www.fmamplifiers.com Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
