Aaron Z <[email protected]> wrote: > Here is what I do when mass flashing WRT54GLs: > 1. Turn it off > 2. Set your IP computer address to 192.168.1.3 (mask 255.255.255.0) <SNIP/> Let me restate the directions after just doing this on my test WRT54GL v1.1 box: 1. Unplug everything from the network ports except the computer you want to use. Plug it into one of the LAN ports. 2. Set your IP address to be in the 192.168.1.0/24 range with the subnet mask of 255.255.255.0 3. Plug in the power cord, power light starts blinking 4. DMZ light turns on (in 10-20 seconds from the power on time) 5. Immediately press one of the buttons (Reset or SES) and hold it until the DMZ light starts to blink 6. Release the botton 7. The Power and DMZ lights now should both be blinking and will stay blinking until you reboot 8. Wait a minute or so for everything to wake up 9. Try to ping/telnet to 192.168.1.1
Aaron Z _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
