On 1/18/24 10:37, Chuanhong Guo wrote:
MT7981 is such a chip with NAT offload capability, and the
flow-offload driver mentioned in other threads is actually
a driver for this hardware block.
Since it's a cost-down MT7986 I would imagine this particular
feature is the same between them:
HW NAT
− Etherent/WiFi
− Wired speed
− IPv4 routing, NAT, NAPT
− IPv6 routing, DS-Lite, 6RD
I can't find an MT7981 / Filogic 820 datasheet anywhere, but apparently
MediaTek was nice enough to put out a public release for the MT7986 /
Filogic 820 for the Banana Pi R3. Anybody know what the differences are?
Could it just be quad vs dual core?
I'm also wondering if MediaTek could be convinced to make a public
release of the MT7981B for this project.
To work on any MediaTek SoCs, if feels like you have to be an expert in
all of them to know what microcode they're reusing for each component
(peripheral interfaces, etc.) from one chip to the next, and thus the
registers and behavior that had been previously published in a some
other programmer's manual. It's a strange world to me.
Daniel
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
