On 11/12/2020 18:59, Mathias Kresin wrote:
12/11/20 1:05 PM, Andre Heider:
Shut up these warnings:
/usr/include/vdsl/cmv_message_format.h:33:6: warning:
"MEI_SUPPORT_DEBUG_STREAMS" is not defined, evaluates to 0 [-Wundef]
#if (MEI_SUPPORT_DEBUG_STREAMS == 1)
^~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/vdsl/drv_mei_cpe_interface.h:2256:6: warning:
"MEI_SUPPORT_OPTIMIZED_FW_DL" is not defined, evaluates to 0 [-Wundef]
#if (MEI_SUPPORT_OPTIMIZED_FW_DL == 1)
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Andre Heider <a.hei...@gmail.com>
---
package/network/config/ltq-vdsl-app/Makefile | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/package/network/config/ltq-vdsl-app/Makefile
b/package/network/config/ltq-vdsl-app/Makefile
index 5e2db1d5c6..ef81f7c8d7 100644
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -35,6 +35,11 @@ define Package/ltq-vdsl-app/description
Userland tool needed to control Lantiq VDSL CPE
endef
+APPL_CFLAGS= \
+ -DMAX_CLI_PIPES=1 \
+ -DMEI_SUPPORT_DEBUG_STREAMS=0 \
+ -DMEI_SUPPORT_OPTIMIZED_FW_DL=0
Hey Andre,
optimized firmware download is enabled in the MEI driver by default:
drv_mei_cpe-1.5.17.6/src/drv_mei_cpe_config.h
#ifndef MEI_SUPPORT_OPTIMIZED_FW_DL
# define MEI_SUPPORT_OPTIMIZED_FW_DL 1
#else
cat /proc/driver/mei_cpe/status/00 shows the FwDownlOpt counter, which
confirms the above.
MEI_SUPPORT_OPTIMIZED_FW_DL should be rather defined as 1 to be on safe
side, even if the IOCTL_MEI_statistic_t struct isn't used at all in the
vdsl-app.
fishy...
Maybe drv_mei_cpe_config.h should be included before
drv_mei_cpe_interface.h then?
regards
Mathias
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
