Shut up these warnings:
/usr/include/vdsl/cmv_message_format.h:33:6: warning:
"MEI_SUPPORT_DEBUG_STREAMS" is not defined, evaluates to 0 [-Wundef]
#if (MEI_SUPPORT_DEBUG_STREAMS == 1)
^~~~~~~~~~~~~~~~~~~~~~~~~
/usr/include/vdsl/drv_mei_cpe_interface.h:2256:6: warning:
"MEI_SUPPORT_OPTIMIZED_FW_DL" is not defined, evaluates to 0 [-Wundef]
#if (MEI_SUPPORT_OPTIMIZED_FW_DL == 1)
^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Andre Heider <[email protected]>
---
package/network/config/ltq-vdsl-app/Makefile | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/package/network/config/ltq-vdsl-app/Makefile
b/package/network/config/ltq-vdsl-app/Makefile
index 5e2db1d5c6..ef81f7c8d7 100644
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -35,6 +35,11 @@ define Package/ltq-vdsl-app/description
Userland tool needed to control Lantiq VDSL CPE
endef
+APPL_CFLAGS= \
+ -DMAX_CLI_PIPES=1 \
+ -DMEI_SUPPORT_DEBUG_STREAMS=0 \
+ -DMEI_SUPPORT_OPTIMIZED_FW_DL=0
+
CONFIGURE_ARGS += \
--enable-vrx \
--enable-vrx-device=vr9 \
@@ -43,7 +48,7 @@ CONFIGURE_ARGS += \
--enable-ifxos \
--enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
--enable-ifxos-library="-I$(STAGING_DIR)/usr/lib" \
- --enable-add-appl-cflags="-DMAX_CLI_PIPES=1" \
+ --enable-add-appl-cflags="$(APPL_CFLAGS)" \
--enable-debug \
--disable-dti \
--with-channels-per-line="1" \
--
2.29.2
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
