At the first start after flashing, there is often a "mount_root: failed to sync jffs2 overlay2". This problem only occurs with the 5.4 kernel. If I build a 4.19 kernel with master, it works. We have tested - FRITZ!Box 4040 (ipq40xx) - Nanobeam AC Gen2 (ath79) - Nanostation AC loco (ath79)
On the UBNT devices it is even worse, because the filesystem is broken after the first flash and does not keep changes after a reboot. There are even other problems, such as the root password being incorrect. A typical log after a reboot log contains several: "Newly-erased block contained word 0x0 at offset 0x00420000" More Infos and logs for ubnt devices: https://bugs.openwrt.org/index.php?do=details&task_id=3272 Logs AVM Fritz!Box: - https://gist.github.com/PolynomialDivision/96bfd98d723f288c617fd96f8ff04c22 I think many more devices are affected. Keep an eye out for jffs2 errors. We believe that the mx25l12835f (16-pin package) chip is causing the problem. OpenWrt Forum: https://forum.openwrt.org/t/nanobeam-ac-gen-2/70640/26 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel