Hi all
On 03.04.2020 11:21, Bjørn Mork wrote:
David Bauer <m...@david-bauer.net> writes:
As the reported major bugs are ironed out, switch to the new kernel to
begin testing with a broader audience.
Hmm... I wonder if you might want to hold back on that for a while.
I have no useful info yet since I don't have console access on this
device, but I just lost network access to a UniFi AP AC PRO after trying
out current master (fcd14017007d).
I held back and planned to report when I have a log from serial, but I'm
sending this now since this sounds similar to my experience.
I've tested 5.4 on my tl-wdr4300v1, and it got stuck in reboot loop
recently. I plan to get a serial connection on it this weekend to see
exactly what happens, but with the easy TFTP recovery I've bisected it
to the GCC 8.4 update. Doing a dirclean between each test,
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=db70077668e757a27f41d9cb3c84f28ea7d4c22e
is the first bad commit. This is the simple config I've used for testing:
CONFIG_TARGET_ath79=y
CONFIG_TARGET_ath79_generic=y
CONFIG_TARGET_ath79_generic_DEVICE_tplink_tl-wdr4300-v1=y
CONFIG_LINUX_5_4=y
CONFIG_TESTING_KERNEL=y
Testing is on hold as the device is in service right now, but I'd
appreciate any ideas for further testing.
/Magnus
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
