From: Catrinel Catrinescu <c...@80211.de>
Because the WPS button had the wrong trigger level,
the failsafe mode was triggered quite often,
after this commit:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=27f3f493de
Signed-off-by: Catrinel Catrinescu <c...@80211.de>
---
target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c | 2 +-
target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c
b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c
index 575a976aec..5544596f91 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c
@@ -47,7 +47,7 @@ static struct gpio_keys_button dorin_gpio_keys[] __initdata =
{
.code = KEY_WPS_BUTTON,
.debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
.gpio = DORIN_GPIO_BTN_JUMPSTART,
- .active_low = 1,
+ .active_low = 0,
},
{
.desc = "reset button",
diff --git a/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
index d0e0169f1b..88b48faf89 100644
--- a/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
+++ b/target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts
@@ -34,7 +34,7 @@
wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
};
reset {
--
2.17.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
