The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped automatically by the mailing list software.
--- Begin Message ---Hi Michal, El 29/1/20 a les 20:07, Michal Cieslakiewicz ha escrit: > Please try adding 'qca,nand-swap-dma;' to '&nand' section in > router dts file. This in theory should fix endianness problem. Yes, that worked! I also had to set nand-ecc-mode = "soft";, as two-byte blocks were still swapped. > By looking at C file, I have also found that this router uses > model-specific ath79_nfc_set_scan_fixup() routine - a functionality > that is not implemented in ath79, because there was no need for such > quirks, at least not until now. Could this be related to the fact that the detected chip has 128 MiB, but it is only usable up to 64 MiB? [ 0.774760] nand: Samsung NAND 128MiB 3,3V 8-bit [ 0.779480] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.787178] Scanning device for bad blocks [ 0.797061] random: fast init done [ 0.927117] 3 fixed-partitions partitions found on MTD device ar934x-nand [ 0.934024] Creating 3 MTD partitions on "ar934x-nand": [ 0.939338] 0x000000000000-0x000000040000 : "booter" [ 0.945095] 0x000000040000-0x000000400000 : "kernel" [ 0.950898] 0x000004000000-0x00000bc00000 : "ubi" [ 0.955673] mtd: partition "ubi" extends beyond the end of device "ar934x-nand" -- size truncated to 0x4000000 Kind regards, Roger
--- End Message ---
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
