The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
sorry, using a pre-loaded image this time:
root@OpenWrt:/tmp# sysupgrade -v
openwrt-brcm2708-bcm2711-rpi-4-ext4-sysupgrade.img.gz
Reading partition table from bootdisk...
Reading partition table from image...
{
"tests": {
"fwtool_signature": true,
"fwtool_device_match": true
},
"valid": true,
"forceable": true,
"allow_backup": true
}
Saving config files...
boot/config.txt
etc/config/dhcp
etc/config/dropbear
etc/config/firewall
etc/config/network
etc/config/system
etc/config/wireless
etc/dropbear/dropbear_rsa_host_key
etc/group
etc/hosts
etc/inittab
etc/opkg/keys/0b26f36ae0f4106d
etc/opkg/keys/1035ac73cc4e59e3
etc/opkg/keys/5151f69420c3f508
etc/opkg/keys/72a57f2191b211e0
etc/opkg/keys/792d9d9b39f180dc
etc/opkg/keys/9ef4694208102c43
etc/opkg/keys/b2d571e0880ff617
etc/opkg/keys/b5043e70f9a75cde
etc/opkg/keys/c10b9afab19ee428
etc/opkg/keys/dace9d4df16896bf
etc/opkg/keys/dd6de0d06bbd3d85
etc/opkg/keys/f94b9dd6febac963
etc/passwd
etc/profile
etc/rc.local
etc/shadow
etc/shells
etc/sysctl.conf
Commencing upgrade. Closing all shell sessions.
-> d4b74aaa #d4b74aaa hello: {}
<- d4b74aaa #00000000 lookup: {"objpath":"system"}
-> d4b74aaa #00000000 data:
{"objpath":"system","objid":177377387,"objtype":1024582224,"signature":{"board":{},"info":{},"reboot":{},"watchdog":{"frequency":5,"timeout":5,"magicclose":7,"stop":7},"signal":{"pid":5,"signum":5},"validate_firmware_image":{"path":3},"sysupgrade":{"path":3,"force":7,"backup":3,"prefix":3,"command":3,"options":2}}}
-> d4b74aaa #00000000 status: {"status":0}
<- d4b74aaa #0a92906b invoke:
{"objid":177377387,"method":"sysupgrade","data":{"prefix":"/tmp/root","path":"/tmp/openwrt-brcm2708-bcm2711-rpi-4-ext4-sysupgrade.img.gz","backup":"/tmp/sysupgrade.tgz","command":"/lib/upgrade/do_stage2","options":{"save_partitions":1}}}
-> 06657534 #d4b74aaa invoke:
{"objid":177377387,"method":"sysupgrade","data":{"prefix":"/tmp/root","path":"/tmp/openwrt-brcm2708-bcm2711-rpi-4-ext4-sysupgrade.img.gz","backup":"/tmp/sysupgrade.tgz","command":"/lib/upgrade/do_stage2","options":{"save_partitions":1}},"user":"root","group":"root"}
<- 06657534 #d4b74aaa data:
{"objid":177377387,"data":{"error":{"message":"Firmware image couldn't be
validated"}}}
{
"error": {
"message": "Firmware image couldn't be validated"
}
}
-> d4b74aaa #0a92906b data:
{"objid":177377387,"data":{"error":{"message":"Firmware image couldn't be
validated"}}}
Command failed: Unknown error
<- 06657534 #d4b74aaa status: {"status":9,"objid":177377387}
-> d4b74aaa #0a92906b status: {"status":9,"objid":177377387}
— PN
> On 31 Dec 2019, at 10:58, Petr Štetiar <yn...@true.cz> wrote:
>
> Petr Novák <pe...@me.com> [2019-12-31 09:42:53]:
>
>> root@OpenWrt:~# sysupgrade -v
>> https://downloads.openwrt.org/snapshots/targets/brcm2708/bcm2711/openwrt-brcm2708-bcm2711-rpi-4-ext4-sysupgrade.img.gz
>> wget: SSL support not available, please install one of the
>> libustream-.*[ssl|tls] packages as well as the ca-bundle and ca-certificates
>> packages.
>
> use http:// or install the recommended packages in order to be able to use
> https://
>
>> Image metadata not found
>> Use sysupgrade -F to override this check when downgrading or flashing to
>> vendor firmware
>> Reading partition table from bootdisk...
>> Reading partition table from image...
>> Invalid partition table on /tmp/image.bs
>> Failed to parse message data
>> sh: out of range
>
> The download of firmware image has failed, but the sysupgrade process
> continues, so this errors are "expected", following patch[1] should fix some
> of this.
>
> 1. https://git.openwrt.org/6dbaf71411e7f16cc1c920b6a63bbe33ef2b8921
>
> -- ynezz
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
