The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped automatically by the mailing list software.
--- Begin Message ---here is the output from the sysupgrade with the additional change and ubus monitor as suggested. This is tested with the development snapshot from the 30th of December: r11832-c48b571ad7 root@OpenWrt:~# sysupgrade -v https://downloads.openwrt.org/snapshots/targets/brcm2708/bcm2711/openwrt-brcm2708-bcm2711-rpi-4-ext4-sysupgrade.img.gz wget: SSL support not available, please install one of the libustream-.*[ssl|tls] packages as well as the ca-bundle and ca-certificates packages. Image metadata not found Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware Reading partition table from bootdisk... Reading partition table from image... Invalid partition table on /tmp/image.bs Failed to parse message data sh: out of range Saving config files... boot/config.txt etc/config/dhcp etc/config/dropbear etc/config/firewall etc/config/network etc/config/system etc/config/wireless etc/dropbear/dropbear_rsa_host_key etc/group etc/hosts etc/inittab etc/opkg/keys/0b26f36ae0f4106d etc/opkg/keys/1035ac73cc4e59e3 etc/opkg/keys/5151f69420c3f508 etc/opkg/keys/72a57f2191b211e0 etc/opkg/keys/792d9d9b39f180dc etc/opkg/keys/9ef4694208102c43 etc/opkg/keys/b2d571e0880ff617 etc/opkg/keys/b5043e70f9a75cde etc/opkg/keys/c10b9afab19ee428 etc/opkg/keys/dace9d4df16896bf etc/opkg/keys/dd6de0d06bbd3d85 etc/opkg/keys/f94b9dd6febac963 etc/passwd etc/profile etc/rc.local etc/shadow etc/shells etc/sysctl.conf Commencing upgrade. Closing all shell sessions. -> e8d7994a #e8d7994a hello: {} <- e8d7994a #00000000 lookup: {"objpath":"system"} -> e8d7994a #00000000 data: {"objpath":"system","objid":619517119,"objtype":1675602203,"signature":{"board":{},"info":{},"reboot":{},"watchdog":{"frequency":5,"timeout":5,"magicclose":7,"stop":7},"signal":{"pid":5,"signum":5},"validate_firmware_image":{"path":3},"sysupgrade":{"path":3,"force":7,"backup":3,"prefix":3,"command":3,"options":2}}} -> e8d7994a #00000000 status: {"status":0} <- e8d7994a #24ed14bf invoke: {"objid":619517119,"method":"sysupgrade","data":{"prefix":"/tmp/root","path":"/tmp/sysupgrade.img","backup":"/tmp/sysupgrade.tgz","command":"/lib/upgrade/do_stage2","options":{"save_partitions":1}}} -> 35669f7b #e8d7994a invoke: {"objid":619517119,"method":"sysupgrade","data":{"prefix":"/tmp/root","path":"/tmp/sysupgrade.img","backup":"/tmp/sysupgrade.tgz","command":"/lib/upgrade/do_stage2","options":{"save_partitions":1}},"user":"root","group":"root"} <- 35669f7b #e8d7994a data: {"objid":619517119,"data":{"error":{"message":"Firmware image couldn't be validated"}}} { "error": { "message": "Firmware image couldn't be validated" } } -> e8d7994a #24ed14bf data: {"objid":619517119,"data":{"error":{"message":"Firmware image couldn't be validated"}}} Command failed: Unknown error <- 35669f7b #e8d7994a status: {"status":9,"objid":619517119} -> e8d7994a #24ed14bf status: {"status":9,"objid":619517119} root@OpenWrt:~# > On 30 Dec 2019, at 23:56, Petr Štetiar <yn...@true.cz> wrote: > > Petr Novák <pe...@me.com> [2019-12-30 20:43:36]: > > Hi, > >> I will do my best to reproduce the issue giving more details, I will post >> any more details here tomorrow. > > if I may, can you do following for the start: > > 1. add following change (changing it directly on device right before step 2. > should be enough): > > diff --git a/package/base-files/files/usr/libexec/validate_firmware_image > b/package/base-files/files/usr/libexec/validate_firmware_image > index f85fb9e4b435..aed9cdfd64b5 100755 > --- a/package/base-files/files/usr/libexec/validate_firmware_image > +++ b/package/base-files/files/usr/libexec/validate_firmware_image > @@ -62,5 +62,6 @@ json_init > json_add_boolean valid "$VALID" > json_add_boolean forceable "$FORCEABLE" > json_add_boolean allow_backup "$ALLOW_BACKUP" > +json_dump -i >&2 > json_dump -i > json_set_namespace $old_ns > > 2. run: > > $ ubus monitor & > $ sysupgrade -v openwrt-brcm2708-bcm2711-rpi-4-squashfs-sysupgrade.img.gz > > and send the output, thanks! > > -- ynezz
--- End Message ---
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
