On 14.07.2019 15:50, Linus Walleij wrote:
+storlink,gemini324) + # These are all connected to eth1 thru VSC7385 + ucidef_set_interface "eth" ifname "eth1" protocol "none" + ucidef_set_interfaces_lan_wan "eth1 lan1 lan2 lan3 lan4" "eth0" + ;;
and:
+itian,sq201) + # These are all connected to eth1 thru VSC7395 + ucidef_set_interface "eth" ifname "eth1" protocol "none" + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0" + ;;
Hi Linus, I can't reproduce working state on P2020RDB with this two methods. In my device work this sequence: ip link set eth0 up ip link set lan1 up ip link set lan2 up ip link set lan3 up ip link set lan4 up ip link add name br-lan type bridge ip link set dev lan1 master br-lan ip link set dev lan2 master br-lan ip link set dev lan3 master br-lan ip link set dev lan4 master br-lan ip addr add 192.168.1.1/24 dev br-lan ip link set dev br-lan up ip link set dev eth0 master br-lan I think, vsc73xx without vlan filtering is very tricky now. Best Regards, Pawel Dembicki _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
