First group the interfaces on the DSA switch into the right LAN/WAN groups. Tested successfully on the Itian Square One SQ201 and the SL93512 reference design with the Vitesse DSA switches.
As discussed on the mailing list, these switches are untagged (DSA_TAG_PROTO_NONE) so the DSA slave devices are only slave devices with not datapath control. This means each of the CPU-facing interfaces need to be brought up with the "none" protocol before any slave devices are brought up. (The sequence matters here.) Tested on each of the three affected devices. Cc: Pawel Dembicki <paweldembi...@gmail.com> Signed-off-by: Linus Walleij <linus.wall...@linaro.org> --- ChangeLog v1->v2: - Remove the eth1 from the LAN bridge in both the Vitesse switch devices, instead bring up each ethernet master interface independently with "none" protocol. --- .../gemini/base-files/etc/board.d/02_network | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100755 target/linux/gemini/base-files/etc/board.d/02_network diff --git a/target/linux/gemini/base-files/etc/board.d/02_network b/target/linux/gemini/base-files/etc/board.d/02_network new file mode 100755 index 000000000000..b5c486666c82 --- /dev/null +++ b/target/linux/gemini/base-files/etc/board.d/02_network @@ -0,0 +1,27 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in +storlink,gemini324) + # These are all connected to eth1 thru VSC7385 + ucidef_set_interface "eth" ifname "eth1" protocol "none" + ucidef_set_interfaces_lan_wan "eth1 lan1 lan2 lan3 lan4" "eth0" + ;; +itian,sq201) + # These are all connected to eth1 thru VSC7395 + ucidef_set_interface "eth" ifname "eth1" protocol "none" + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth0" + ;; +dlink,dir-685) + # These are all connected to eth0 thru RTL8366RB + ucidef_set_interface "eth" ifname "eth0" protocol "none" + ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" + ;; +esac + +board_config_flush + +exit 0 -- 2.21.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
