Hi Etienne, one small remark:
On 14.07.19 04:43, Etienne Champetier wrote: > ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0); > ath79_eth1_data.mii_bus_dev = &rbwapgsc_phy_device.dev; > ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; > ath79_eth1_data.phy_mask = BIT(RBWAPGSC_MDIO_PHYADDR); > + ath79_eth1_data.enable_sgmii_fixup = 1; This should be dropped as it's not necessary anymore. Best wishes David > ath79_eth1_pll_data.pll_1000 = 0x03000101; > ath79_eth1_pll_data.pll_100 = 0x80000101; > ath79_eth1_pll_data.pll_10 = 0x80001313; > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
