On 3/29/19 1:43 PM, Ben Greear wrote: > > > On 03/29/2019 02:58 AM, Koen Vandeputte wrote: >> >> On 26.03.19 19:39, Ben Greear wrote: >>> On 3/26/19 6:59 AM, Koen Vandeputte wrote: >>>> >>>> On 26.03.19 14:50, Ben Greear wrote: >>>>> >>>>> >>>>> On 03/26/2019 03:09 AM, Koen Vandeputte wrote: >>>>>> Hi Ben, >>>>>> Following our conversation from yesterday, here is a summary of >>>>>> all issues seen so far: >>>>>> >>>>>> Test setup: >>>>>> >>>>>> - Board: Mikrotik RB922 >>>>>> - Hardware used: on-board QCA9882 (QCA988x), Wave1 2x2 .ac >>>>>> - firmware's tested: both non-HTT and HTT flavours for qca988x >>>>>> >>>>>> Synopsis: >>>>>> - Setting the interface in IBSS mode results in following errors >>>>>> and spamming >>>>>> - Speed is very low (100 kbit/s) upon linking 2 devices in HT20, >>>>>> long GI >>>>> >>>>> Hello, >>>>> >>>>> Do you see those SWBA overrun messages on both systems, or just one >>>>> of them? >>>>> >>>>> I'll work on fixing the out-of-my-tree compile for 4.20 today, as >>>>> well as do >>>>> a quick test on 4.19 to see if I see that error below. >>>>> >>>>> Thanks, >>>>> Ben >>>>> >>>> Hi Ben, >>>> >>>> A huge amount of then continuously: >>> >>> I updated ath10k-ct (commit-id: >>> be5c21a82b15d28991500a28f7b2b6840356281f) >>> >>> I fixed part of the issue with 4.20 not compiling in openwrt, but the >>> other part appears to be >>> a backports issue, and I did not attempt to get that working. >>> >> Hi Ben, >> >> This is still remaining using 4.20: >> >> make[4]: Entering directory >> '/mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/linux-4.14.109' >> >> CC [M] >> /mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-26-be5c21a8/ath10k-4.20/mac.o >> >> /mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-26-be5c21a8/ath10k-4.20/mac.c: >> In function 'ath10k_mac_register': >> /mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-26-be5c21a8/ath10k-4.20/mac.c:9772:11: >> error: 'NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT' undeclared (first use >> in this function); did you mean >> 'NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT'? >> NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT); >> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT >> /mnt/ramdisk/koen/firmware/builds/generic_rb922/build_dir/target-mips_24kc_musl/linux-ar71xx_mikrotik/ath10k-ct-2019-03-26-be5c21a8/ath10k-4.20/mac.c:9772:11: >> note: each undeclared identifier is reported only once for each >> function it appears in > > I think you will need to go back to 4.19 based driver, or add a hack to > #ifdef that code out while compiling > in openwrt. > > I did a brief test with the 4.19 ct driver and it seems to work OK in my > test setup. Since it appears openwrt > will be stuck on 4.19 for a while, I'll put some more effort into > keeping my 4.19 tree up to date. > > Also, I found a nasty bug with mgt frames in htt-mgt mode yesterday, and > uploaded new beta firmware to my > web page...will post csums and such to this list later today. > > Thanks, > Ben > > Hi,
I have a more recent mac80211 framework from kernel 5.1-rc2 in my feature branch: https://git.openwrt.org/?p=openwrt/staging/hauke.git;a=shortlog;h=refs/heads/mac80211-5.0 I plan to merge this after the next release is branched off. You could try that with ath10k-ct from kernel 4.20. Hauke _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
