This is a simple copy of ipq40xx: speed up ath10k-caldata extraction commit
/a69e101ed1169f562fc030a783cd997d3f066b16
Tested on DIR-825-B1
3768+0 records in
3768+0 records out
real 0m 11.90s
user 0m 0.03s
sys 0m 9.94s
1+0 records in
1+0 records out
real 0m 0.03s
user 0m 0.00s
sys 0m 0.03s
With this change eeprom extraction is fast enough to get working Wi-Fi after
initial install.
Signed-off-by: Dmitry Tunin <hanipouspi...@gmail.com>
---
target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 8b217d1..84e4d07 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -20,7 +20,7 @@ ath9k_eeprom_extract() {
[ -n "$mtd" ] || \
ath9k_eeprom_die "no mtd device found for partition $part"
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count
2>/dev/null || \
+ dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count
skip=$offset count=1 2>/dev/null || \
ath9k_eeprom_die "failed to extract from $mtd"
}
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
