On Wed, Jan 9, 2019 at 8:31 PM Joseph Tingiris <joseph.tingi...@gmail.com> wrote: > > This is a significant revision of /etc/init.d/mdadm. It adds new > features, support for new configuration options, safer error > handling, (configurable) verbose output, and contains multiple bug > fixes. > > Most notably, mdadm was being started with the --config flag and > that prevented it from using its built in Auto Assembly features. > Users were required to put a correct uuid in /etc/config/mdadm. > Configuring arrays is not for the feint of heart. > > The previous /etc/config/mdadm options left uncommented, that prevented > mdadm from starting successfully, were corrected and the default startup > mode is now to automatically assemble all RAID arrays attached to the > machine using device scans rather than configuation options and a > persistent state file. > > A new UCI section, config mdadm global, was added with new options that are > supported by the accompanying /etc/init.d/mdadm. Documentation for all > new (and previous) options was added as well. See the > /etc/config/mdadmin or mdadm.init file itself for more details. > > Additionally, a new stateful 'auto' feature was added that functions > similarly to the stateless Auto Assembly feature. The benefits of > stateful auto assembly are to support features that mdadm 4.0 will only > read from a configuration file, such as setting the MAILFROM value. The > new mdadm_conf_auto() function will also greatly aid users in > troubleshooting. When verbose is turned on it provides tips, better > visibility for what's actually happening, and sets the stage for > moderately advanced users to take more control over their RAIDs. > > Stateful UCI only configurations are still supported and will still work. > All previously existing configurations will work in this mode. However, > these users will now have to explicitly turn it on. Documentation is > provided in the new mdadm.config file. I'd expect very few regressions. > Anyone using the old init had to be an expert. The mdadm 4.0-5 package > doesn't function out of the box. For more detail about these parts, > see FS2043 here https://bugs.openwrt.org/ > > A new reload_service() function was added to prevent reloads from > stopping mdadm. That caused issues when filesystems were mounted. > Reloads will now be ignored, though the stage is set for reloads to > trigger scans for new devices. Explicit restarts still work as expected. > > The start_service() function was enhanced to query new UCI mdadm.global > options: alert_program, config, email, email_from, monitor_frequency, > and verbose. Each is documented in /etc/mdadm/config (config.init) and > some additional code comments were added. As well, error handling and > verbose output was greatly enhanced. It's not going to do anything > without users knowing what's going on (if verbose is turned on). > Backward compatibility was retained. Strict reliance on a shell global > ($CONF) was removed and replaced with a single global ($TMP_FILE) that's > for development convenience. When/if a config file is not specified in > the UCI config, it will fall back to using $TMP_FILE as the > configuration file. > > Incremented PKG_RELEASE from 5 to 6 > > For more details, see: https://github.com/openwrt/openwrt/pull/1713/ Any progress on this? I've been using this for a while. I recently ran into an issue (segfault) with mdadm that required me to bump the version. > > Signed-off-by: Joseph Tingiris <joseph.tingi...@gmail.com> > --- > package/utils/mdadm/Makefile | 2 +- > package/utils/mdadm/files/mdadm.config | 162 ++++++++++- > package/utils/mdadm/files/mdadm.init | 491 > +++++++++++++++++++++++++++++++-- > 3 files changed, 615 insertions(+), 40 deletions(-) > > diff --git a/package/utils/mdadm/Makefile b/package/utils/mdadm/Makefile > index ba74997..3fabc8a 100644 > --- a/package/utils/mdadm/Makefile > +++ b/package/utils/mdadm/Makefile > @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk > > PKG_NAME:=mdadm > PKG_VERSION:=4.0 > -PKG_RELEASE:=5 > +PKG_RELEASE:=6 > > PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz > PKG_SOURCE_URL:=@KERNEL/linux/utils/raid/mdadm > diff --git a/package/utils/mdadm/files/mdadm.config > b/package/utils/mdadm/files/mdadm.config > index 50afbc2..88e0bb9 100644 > --- a/package/utils/mdadm/files/mdadm.config > +++ b/package/utils/mdadm/files/mdadm.config > @@ -1,18 +1,154 @@ > -config mdadm > +# > +# The mdadm 'global' section is for options that apply to all sections. > +# > + > +config mdadm global > + > + # > + # option 'alert_program' values may be a path to a valid, executable > binary. > + # > + # The default 'alert_program' is not set. > + # > + # When mdadm detects an event it will execute this program with 3 > arguments, see mdadm(8) > + # $1 = will be the event > + # $2 = will be the meta device > + # $3 = may be a related component (if one exists) > + # > + # * alert_program runs independently from sendmail. > + # * If both options alert_program and email are set, and both work, > then an email and a > + # custom alert will be generated. > + # * no alert program is included in mdadm 4.0-4. > + # > + # Lots of possibilities exist, i.e. scripts for netdata, slack, etc. > + # > + #option alert_program /usr/sbin/mdadm_alerts > + > + > + # > + # option 'config' values may be one of the following. > + # > + # The default 'config' is none (stateless auto assembly). > + # > + # auto - stateful, dynamically generated mdadm.conf via > block info, > + # stored in /var/etc/mdadm.conf > + # containers - stateless, mdadm --assemble --scan > --config=containers; see mdadm(8) > + # none - stateless, mdadm --assemble --scan --config=none; > aka 'Auto Assembly', > + # see mdadm(8) > + # partition - stateless, mdadm --assemble --scan > --config=partition; see mdadm(8) > + # uci - stateful, dynamically generated mdadm.conf via uci > array values (below), > + # stored in /var/etc/mdadm.conf > + # </file> - stateful, manually generated mdadm.conf file(s), > + # <file> must be preceded by a / and may be a > readable filename > + # or directory with .conf files > + # > + # Try uncommenting this and using 'auto' if there are issues. It > provides more comprehensive > + # diagnostics via verbose messages & the ability to set an email from > address. > + # > + #option config auto > + > + > + # > + # option 'email' values may be a valid (to) email address, or empty. > + # > + # The default 'email' to send to is root (monitor email will be sent > to the local root user). > + # > + # * Sending mail will only work if /usr/lib/sendmail or > /usr/sbin/sendmail is available. Install postfix. > + # * Comment, or unset, the email value causes mail to be disabled. > With no email value, mdadm wont even try. > + # * A single word name must be a valid user on the system, or it will > bounce back to root. > + # Unless user 'mdadm' exists (it doesn't by default), this will > bounce: > + # option email mdadm > + # * A full email address does not need quoting and will deliver if > tcp port 25 (SMTP) is allowed outbound, i.e. > + # option email joseph.tingi...@gmail.com > + # * mdadm only supports one email address (MAILADDR) for all arrays. > see mdadm.conf(5) > + # > + # mail will be to 'root@$HOSTNAME', i.e. root@OpenWrt > + # > option email root > - # list devices /dev/hd* > - # list devices /dev/sd* > - # list devices partitions > > -config array > - option uuid 52c5c44a:d2162820:f75d3464:799750f8 > - option device /dev/md0 > - # option name raid:0 > - # option super_minor 0 > - # list devices /dev/sda1 > - # list devices /dev/sdb1 > - # option spares 0 > - # option spare_group spares > + > + # > + # option 'email_from' values may be a valid (from) email address, or > empty. > + # > + # The default 'email_from' is 'OpenWrt RAID Monitoring > <mdadm@$HOSTNAME>', i.e. mdadm@OpenWrt > + # > + # * Sending mail will only work if /usr/lib/sendmail or > /usr/sbin/sendmail is available. Install postfix. > + # * Comment, or unset, the email_from value causes mdadm to send mail > from > + # root@$HOSTNAME, e.g. root@OpenWrt > + # * A complete from envelope can be specified within quotes, i.e. > + # option email_from 'mdadm monitoring > <this_is_not_s...@example.com>' > + # * mdadm only supports setting a from address (MAILFROM) with a > stateful config, > + # e.g. 'auto' or 'uci'. see mdadm.conf(5) > + # > + # mail will be from 'OpenWrt RAID Monitoring <mdadm@$HOSTNAME>', i.e. > mdadm@OpenWrt > + # > + option email_from 'OpenWrt RAID Monitoring <mdadm>' > + > + > + # > + # option 'monitor_frequency' values may be a valid integer, or empty. > + # > + # The default monitor frequency (delayed poll) is 120 seconds. > + # > + # * This is the polling interval, frequency, or delay. It's the > value for mdadm --delay. see mdadm(8) > + # > + option monitor_frequency 300 > + > + # > + # option 'verbose' values may be '1', 'on', or 'true', everything > else is false. > + # > + # The default verbosity is false (quiet). > + # > + # * Standard errors will be sent to console and syslog regardless of > this setting. > + # * When verbose is false mdadm will run in --quiet mode and generate > very little log > + # or standard output. > + # > + # Turn this on if you're having problems, or want more detail. With > SSH_TTY set output will > + # be to that TTY, otherwise it will go to syslog via logger. > + # > + #option verbose on > + > + > +# > +# The mdadm 'array' section(s) are for stateful, manual configurations. > Experts only. Use with caution. > +# > +# > +# The use of multiple 'array' sections is supported by /etc/init.d/mdadm. > +# They must all be named 'array'. > +# > +# As of this writing unnamed 'mdadm' sections are still allowed, but > deprecated. Do not use. > +# > + > +#config array > + # > + # example 'array' options may be a valid mix of: > + # > + # bitmap > + # container > + # device > + # devices > + # member > + # name > + # spare_group > + # spares > + # super_minor > + # uuid > + # > # option bitmap /bitmap.md > # option container 00000000:00000000:00000000:00000000 > + # option device /dev/md0 > + # -and/or a devices list- > + # list devices /dev/hd* # mdadm allows glob, see glob(7) > + # list devices /dev/sd* > + # list devices /dev/sda1 > + # list devices /dev/sdb1 > + # list devices containers > + # list devices partitions > # option member 1 > + # option name raid:0 > + # option spare_group spares > + # option spares 0 > + # option super_minor 0 > + # use uuid from block info (preferred), or mdadm --misc --detail > /dev/md0 > + # option uuid 2084de11-70c4-4521-8f95-6113e75f1fe9 > + # > + # These options directly translate to mdadm -- options, see man > mdadm(8) > diff --git a/package/utils/mdadm/files/mdadm.init > b/package/utils/mdadm/files/mdadm.init > index 64a50b3..5453f7d 100644 > --- a/package/utils/mdadm/files/mdadm.init > +++ b/package/utils/mdadm/files/mdadm.init > @@ -1,13 +1,21 @@ > #!/bin/sh /etc/rc.common > > -START=13 > -STOP=98 > +# 20190106, joseph.tingi...@gmail.com, significant revision; new features, > +# safer error handling, code formatting, > +# & multiple bug fixes > + > +START=12 > +STOP=X99 # X99? seems to work; passed service enable/disable tests & boot > tests > > USE_PROCD=1 > PROG=/sbin/mdadm > NAME=mdadm > > -CONF="/var/etc/mdadm.conf" > +VERBOSE=0 # off > + > +TMP_FILE="/var/etc/mdadm.conf" # /var/etc is on /tmp; used for temporary > state, to enable stateful only mdadm features > + > +[ ! -x "$PROG" ] && exit 1 > > append_list_item() { > append "$2" "$1" "$3" > @@ -30,30 +38,165 @@ append_option() { > [ -n "$str" ] && append "$var" $(printf "%s=%s" > "${name:-${opt//_/-}}" "$str") > } > > -mdadm_common() { > - local cfg="$1" > - local email devices > +verbose() { > + local msg="$1" > + local level="$2" > > - if [ -x /usr/sbin/sendmail ]; then > - config_get email "$cfg" email > - [ -n "$email" ] && printf "MAILADDR %s\n" "$email" >> $CONF > + [ -z "$level" ] && level="INFO" > + > + if [ "$VERBOSE" == "1" ]; then > + if [ ${#SSH_TTY} -gt 0 ]; then > + printf "$NAME: init %7s - %b\n" "$level" "$msg" > + else > + # no SSH_TTY goes to logger > + printf "$NAME: init %7s - %b\n" "$level" "$msg" | > logger -t mdadm > + fi > fi > +} > > - config_list_foreach "$cfg" devices append_list_item devices " " > - [ -n "$devices" ] && printf "DEVICE %s\n" "$devices" >> $CONF > +mdadm_conf_auto() { > + local mdadm_conf="$1" > + > + if [ ! -w "$mdadm_conf" ]; then > + if [ -z "$mdadm_conf" ]; then > + verbose "mdadm_conf value is empty" ERROR > + else > + verbose "'$mdadm_conf' file not found writable" ERROR > + fi > + return 1 > + fi > + > + local block_md block_uuid mdadm_md mdadm_md_rc mdadm_uuid > + > + # Check block info for active linux_raid_members, if necessary then > compare with mdadm, & dynamically update $mdadm_conf > + > + block_md=0 # counter > + for block_uuid in $(block info 2> /dev/null | grep linux_raid_member > | awk '{print $2}' | awk -F\" '{print $(NF-1)}'); do > + mdadm_md="" > + mdadm_md_rc=0 > + > + while [ -z "$mdadm_md" ]; do > + if [ -b "/dev/md$block_md" ]; then > + # handle mdadm restart, service reload, > multiple starts without stops, physical unplug, etc. > + > + verbose "/dev/md$block_md block device > already exists" NOTICE > + > + # active arrays will promptly respond; first > check > + mdadm_uuid=$($PROG --detail --test --brief > "/dev/md$block_md" 2> /dev/null | grep -E "((.*)(UUID=(.){36})$" | head -1 | > awk -F= '{print $NF}') > + > + if [ -z "$mdadm_uuid" ]; then > + # When an array is unplugged and then > plugged in again (without rebooting) then it becomes an INACTIVE-ARRAY > + # however the device file persists, > e.g. /dev/md0, and should be reused, rather than a new device assigned. > + if $PROG --detail --test --scan > "/dev/md$block_md" 2> /dev/null | grep -E "^(INACTIVE-ARRAY(\ > |\t)(.*)/dev/md(|/)$block_md(\ |\t)metadata)" &> /dev/null; then > + verbose "attempting to revive > INACTIVE-ARRAY on /dev/md$block_md" NOTICE > + $PROG --examine --scan 2> > /dev/null | egrep -qE "^(ARRAY(\ |\t)(.*)/dev/md(|/)$block_md(\ |\t))" > + if [ $? -eq 0 ]; then > + # this is relatively > safe with the above regex validation > + > mdadm_md="/dev/md$block_md" > + fi > + else > + # This is an unsafe condition > to handle with a shell, mdadm sees an inactive device with a different /dev. > + # Err to the side of > caution;--assemble --scan shoud know what to do ... it will abandon the block > device. > + # If these are happening, > suggest stateless & sacrifice some minor functionality, e.g. MAILFROM > + # May be an mdadm or kernel > bug with this hardware setup. > + verbose "bug? unsafe to > revive INACTIVE-ARRAY on /dev/md$block_md" WARNING > + let block_md=$block_md+1 > + continue > + fi > + fi > + > + if [ "${block_uuid//-/}" == > "${mdadm_uuid//:/}" ]; then > + # block info & mdadm concur all's > well; the meta device is active; reuse > + mdadm_md="/dev/md$block_md" > + verbose "auto conf found active RAID > member block_uuid=$block_uuid and will reused device '$mdadm_md'" OK > + else > + if [ ! -e "/dev/md$block_md" ]; then > + # this block device was never > assembled previously; new > + mdadm_md="/dev/md$block_md" > + verbose "auto conf found new > RAID member block_uuid=$block_uuid and will assign device '$mdadm_md'" OK > + else > + let block_md=$block_md+1 > + continue > + fi > + fi > + > + else > + if [ ! -e "/dev/md$block_md" ]; then > + # best scenario; no device or file > (yet), safest > + mdadm_md="/dev/md$block_md" > + verbose "auto conf found missing RAID > member block_uuid=$block_uuid and will assign device '$mdadm_md'" OK > + else > + # a file exists, but it's not a block > device? It's possible (touch), albeit a corner case; discretely say > + # we know & pass over it. > + verbose "/dev/md$block_md file found, > not a block device" WARNING > + let block_md=$block_md+1 > + continue > + fi > + fi > + > + $PROG --detail --test --brief $mdadm_md &> /dev/null > # rc 1=ok, 1=degrade, 2=dead, 4=missing > + mdadm_md_rc=$? > + > + # todo: annouce degraded arrays in the logs? mdadmin > monitor will do it but not on demand, only per frequency. > + # nice to have for hot plugs ... > + > + verbose "block_md=$block_md, block_uuid=$block_uuid, > mdadm_md=$mdadm_md, mdadm_uuid=$mdadm_uuid, rc=$mdadm_md_rc" INFO > + > + if [ $mdadm_md_rc -lt 4 ]; then > + $PROG --detail --test --brief $mdadm_md 2> > /dev/null >> $mdadm_conf > + else > + # there's a device with no header. maybe > it's to replace a failed device ... > + echo "ARRAY $mdadm_md uuid=$block_uuid" >> > $mdadm_conf > + fi > + > + done > + > + done > + > + if [ -n "$mdadm_md" ]; then > + return 0 > + else > + return 1 > + fi > } > > -mdadm_array() { > +mdadm_conf_uci() { > local cfg="$1" > - local uuid device devices name array > + local mdadm_conf="$2" > + > + if [ -z "$cfg" ]; then > + verbose "cfg is empty" WARNING > + return 1 > + fi > + > + local cfg_name=$(uci_get mdadm.$cfg 2> /dev/null) > + > + if [ -z "$cfg_name" ]; then > + verbose "($cfg) mdadm config name is empty" NOTICE > + fi > + > + if [ -z "$mdadm_conf" ]; then > + verbose "($cfg) skipping mdadm.$cfg_name array; config file > is empty" WARNING > + return 1 > + fi > + > + if ! touch "$mdadm_conf" 2> /dev/null; then > + verbose "($cfg) skipping mdadm.$cfg_name array; can't touch > '$mdadm_conf'" ERROR > + return 1 > + fi > + > + local array device devices name uuid > > - config_get uuid "$cfg" uuid > config_get name "$cfg" name > config_get device "$cfg" device > + config_get uuid "$cfg" uuid > + > + config_list_foreach "$cfg" devices append_list_item devices " " > + [ -n "$devices" ] && printf "DEVICE %s\n" "$devices" >> $mdadm_conf > > if [ -z "$device" ] || [ -z "$uuid$name" ]; then > - echo "Skipping array without device, uuid or name" >&2 > - return > + verbose "($cfg) skipping mdadm.$cfg_name array; no device, > uuid, or name" WARNING > + return 1 > fi > > [ -n "$uuid" ] && append array "uuid=$uuid" > @@ -67,27 +210,323 @@ mdadm_array() { > append_option array "$cfg" member > append_option array "$cfg" devices devices "," > > - printf "ARRAY %s %s\n" "$device" "$array" >> $CONF > + printf "ARRAY %s %s\n" "$device" "$array" >> $mdadm_conf > +} > + > +reload_service() { > + # fix. stopping mdadm every time a reload is requested is bad. > + # procd needs this or it'll call restart, which will call > stop_service and then start_service. > + # running start_service() should be OK, it already rescans for > hotplugged devices, add new arrays, etc. > + # todo: better test calling start_service() on reload, for now, > verbosely ignore & exit 0 ... > + verbose "reload_service called, ignoring" NOTICE > + exit 0 > } > > start_service() { > - local email > + local config config_detail config_file config_level config_mode > config_rc config_state config_verbose mdadm_conf > + > + # mdadm.global specific locals > + local alert_program email email_from mail_program mdadm_args > monitor_frequency > + > + config_verbose=$(uci_get mdadm.global.verbose 2> /dev/null | awk > '{print tolower($1)}') > + if [ "$config_verbose" == "1" ] || [ "$config_verbose" == "on" ] || [ > "$config_verbose" == "true" ]; then > + VERBOSE=1 # turn verbose on globally > + config_verbose=1 > + mdadm_args="--verbose" > + else > + unset -v config_verbose > + mdadm_args="--quiet" > + fi > + > + verbose "start_service $@" INFO > + > + config_rc=0 > + config_detail="start" > + config_level="INFO" > + config_mode="service" > + > + config=$(uci_get mdadm.global.config 2> /dev/null) > + if [ -z "$config" ]; then > + # per PR1713 discussion; this works very well for the > majority of use cases; let mdadm do the heavy lifting. > + # none is (Auto Assemble; or no --config); see mdadm(8), > default > + config='none' > + config_detail="mdadm.global.config value is empty" > + config_state='stateless' > + config_mode="default" > + config_level='OK' > + else > + # experts only > > - mkdir -p "${CONF%/*}" > - printf "# Autogenerated from /etc/config/mdadm, do not edit!\n" > > $CONF > + config_mode="manual" > > - config_load mdadm > - config_foreach mdadm_common mdadm > - config_foreach mdadm_array array > + # check file values first, to preserve case of file name > values > + if [ "${config:0:1}" == "/" ]; then > + config_state='stateful' # all types of file configs > are stateful > > - $PROG --assemble --scan --config="$CONF" > + if [ -d "$config" ] && [ -r "$config" ]; then > + local config_file_count=0 > + for config_file in ${config}/*.conf; do > + if [ -r "$config_file" ]; then > + let > config_file_count=$config_file_count+1 > + fi > + done > + if [ $config_file_count -eq 0 ]; then > + config_level="WARNING" > + else > + config_level="OK" > + fi > + config_detail="directory found with > $config_file_count readable .conf files" > + else > + if [ -w "$config" ]; then > + if [ -s "$config" ]; then > + # regardless, this will rely > on mdadm for final validation; for informational purposes ... > + grep -E '^((DEVICE){1}(\ > |\t)(.*)(/dev/|containers|partitions))' "$config" &> /dev/null # pattern per > mdadm(8) > + if [ $? -eq 0 ]; then > + config_detail="file > found, readable with a ^DEVICE" > + config_level="OK" > + else > + config_detail="file > found, readable without a ^DEVICE" > + config_level="WARNING" > + fi > + else > + config_detail="file found, > writable and empty" > + config_level="OK" > + fi > + else > + config_detail="file not found, > unwritable" > + config_level="FATAL" > + config_rc=1 > + fi > + fi > + else > + config_mode="dynamic" > > + # allow static values in mixed case; convert to lower > + config="$(awk -v config="$config" 'BEGIN{print > tolower(config)}')" > + if [ "$config" == "containers" ] || [ "$config" == > "none" ] || [ "$config" == "partition" ]; then > + # pass through to mdadm --config= > + config_detail="dynamic; uci static key value" > + config_level="OK" > + config_state='stateless' > + else > + if [ "$config" == "auto" ] || [ "$config" == > "uci" ]; then > + config_detail="dynamic; $config > config" > + config_level="OK" > + config_state='stateful' > + mdadm_conf="$TMP_FILE" > + else > + config_detail="invalid; unsupported > uci config key value" > + config_level="FATAL" > + config_state='stateful' > + config_rc=1 > + fi > + fi > + fi > + fi > + > + # final safety & functional checks > + > + # check for fatality > + if [ -z "$config" ]; then > + config="${config}?" > + config_detail="$config_detail (sorry, something went wrong; > check the config settings)" > + config_level="FATAL" > + config_mode="${config_mode}?" > + config_state="${config_state}?" > + config_rc=1 > + fi > + > + # Prefer mdadm.global.email; only one is allowed and can be an > --email argument per mdadm.conf(5) > + email=$(uci_get mdadm.global.email 2> /dev/null) > + > + # mdadm (or postfix?) bug; workaround. mdadm 4.0 for 18.06.1 has a > compiled in default of '/usr/lib/sendmail -t'. > + # There's no configurable way to change it and mdadm must be > recompiled differently for Openwrt, or posfix should > + # add the link. In 18.06.1, postfix 3.3.0-1 installs sendmail in > /usr/sbin; mdadm complains & no mail is delivered. > + # Other distro's postfix pkg typically installs this link ... or one > in /etc/alternatives. > + # Since mdadm needs it, I'm adding it here to be sure mdadm can send > email if there's a /usr/sbin/sendmail. > + > + # There's really no point in making mdadm's compiled in sendmail > configurable via uci. > + mail_program="/usr/lib/sendmail" > + if [ -x /usr/sbin/sendmail ] && [ ! -e "$mail_program" ]; then > + # a sym link will suffice > + ln -s /usr/sbin/sendmail "$mail_program" > + if [ $? -ne 0 ]; then > + verbose "ln -s /usr/bin/sendmail /usr/lib/sendmail > failed" WARNING > + fi > + fi > + > + if [ ! -x "$mail_program" ]; then > + verbose "disabling email; mail program '/usr/lib/sendmail' > not found executable (install postfix)" WARNING > + email="" > + fi > + > + if [ "$config_state" == "stateful" ] && [ -n "$mdadm_conf" ]; then > + if mkdir -p "${mdadm_conf%/*}" &> /dev/null; then > + printf "# Autogenerated from /etc/init.d/mdadm, do > not edit!\n" > $mdadm_conf > + > + # Use mdadm.global.email_from only if there's a valid > mta; only one is allowed per mdadm.conf(5) > + # todo: see what other mtas Openwrt has in their opkg > repos & maybe support others > + if [ -x "$mail_program" ]; then > + email_from=$(uci_get mdadm.global.email_from > 2> /dev/null) > + fi > + > + if [ "$config" == "auto" ]; then > + # stateful mdadm.conf auto configuration > + if ! mdadm_conf_auto "$mdadm_conf"; then > + #there's quite a bit of logic & error > handling in mdadm_conf_auto; if it doesn't return 0 then it's a fatality > + config_detail="$config_detail > (couldn't find any meta devices; check connections, or try stateless > autoconfig)" > + config_level="FATAL" > + config_rc=1 > + fi > + else > + # stateful mdadm.conf uci configuration > + > + # load uci config from /etc/config/mdadm > + config_load mdadm > + > + # This is how mdadm uci mdadm config sections > should be named, like fstab does with 'mount'. > + # The included uci /etc/config/mdadm provides > more documentation & direction. > + config_foreach mdadm_conf_uci array > "$mdadm_conf" > + > + # The unlabled mdadm.@mdadm[0] section should > be (is now) deprecated. > + # It's more difficult to document how to use, > redundant, and over complicated this init configuration. > + > + # Confused; originally config_foreach? > + # It's possible to specify multiple mdadm > sections with array options in all sections. > + # Thus multiple option emails which could > result in multiple MAILADDR being appended to mdadm.conf. > + # That confuses mdadm. > + > + # The following code is here to prevent > regressions. > + > + config_foreach mdadm_conf_uci mdadm > "$mdadm_conf" > + > + # For backward compatibility; this will allow > an mdadm.@mdadm[0] section's option email. > + # (only if mdadm.global.email is not set; > again, prefer mdadm.global.email) > + # > + # bug fixed. The first legacy mdadm section > option email will be used. > + # a better fix would be to *only* support > array sections. > + # > + [ -z "$email" ] && [ -x "$mail_program" ] && > email=$(uci_get mdadm.@mdadm[0].email 2> /dev/null) > + # email_from is a new feature; was not > previously handled; no need to and please don't backport > + > + fi > + > + # This is nice feature to have to get mdadm mails > through spam filters, etc. > + # Too bad mdadm (4.0) doesn't have an argument for it. > + # Maybe mdadm 4.1 will ... todo: revisit when making > mdadm 4.1 & it's in Openwrt mainline. > + # This tests successfully with the postfix workaround > above & mdadm 4.0. > + if [ -x "$mail_program" ]; then > + printf "MAILFROM %s\n" "$email_from" >> > $mdadm_conf # only supported via stateful configs; see mdadm.conf(5) > + fi > + > + if [ -n "$config_verbose" ] && [ -r "$mdadm_conf" ]; > then > + verbose "mdadm_conf = $mdadm_conf > (config_verbose=$config_verbose)" INFO > + verbose "---cut $mdadm_conf cut---" INFO > + while read line; do > + verbose "$line" INFO > + done < "$mdadm_conf" > + unset -v line > + verbose "---cut $mdadm_conf cut---" INFO > + fi > + > + else > + config_detail="$config_detail (mkdir failed; check > permissions)" > + config_level="FATAL" > + config_rc=1 > + fi > + fi > + > + if [ $config_rc -ne 0 ]; then > + # FATAL > + verbose "$config_state,$config_mode config='$config', > $config_detail" "$config_level" INFO > + [ -n "$mdadm_conf" ] && [ -w "$mdadm_conf" ] && rm -f > "$mdadm_conf" > + exit $config_rc > + fi > + > + # Good to go, no more fatal exits, finish getting global & setting > local values ... they're all optional. > + > + mdadm_args="$mdadm_args --scan" > + > + if [ -n "$mdadm_conf" ]; then > + # mdadm.global.config </file> > + mdadm_args="$mdadm_args --config=$mdadm_conf" > + else > + # mdadm.global.config all (containers, partitions, etc), > except none > + [ -n "$config" ] && [ "$config" != 'none' ] && > mdadm_args="$mdadm_args --config=$config" > + fi > + > + local assemble_count assemble_rc > + > + assemble_count=$($PROG --detail --brief --scan 2>/dev/null | wc -l) > + verbose "$assemble_count arrays are currently assembled" INFO > + > + # setup assembly mode > + > + verbose "(assemble) '$PROG --assemble $mdadm_args'" INFO > + $PROG --assemble $mdadm_args &> /dev/null > + assemble_rc=$? > + > + if [ $assemble_rc -eq 0 ]; then > + verbose "all arrays assembled successfully" OK > + if [ -n "$config_verbose" ]; then > + >/tmp/mdadm.detail > + local assemble_dev assemble_devs=$($PROG --detail > --brief --scan | awk '{print $2}') > + for assemble_dev in $assemble_devs; do > + printf "\n" >> /tmp/mdadm.detail > + $PROG --verbose --detail $assemble_dev >> > /tmp/mdadm.detail > + printf "\n" >> /tmp/mdadm.detail > + done > + unset -v assemble_dev > + while read line; do > + verbose "$line" INFO > + done < "/tmp/mdadm.detail" > + unset -v line > + fi > + else > + if [ $assemble_count -eq 0 ]; then > + verbose "no arrays assembled successfully" ERROR > + else > + verbose "no new arrays need assembly" NOTICE > + fi > + fi > + > + # setup monitor mode > + > + alert_program=$(uci_get mdadm.global.alert_program 2> /dev/null) > + if [ -n "$alert_program" ]; then > + if [ -x "$alert_program" ]; then > + mdadm_args="$mdadm_args --alert=$alert_program" > + else > + verbose "disabling alerts; alert_progam > '$alert_program' not found executable" WARNING > + fi > + fi > + > + [ -n "$email" ] && mdadm_args="$mdadm_args --mail=$email" > + > + monitor_frequency=$(uci_get mdadm.global.monitor_frequency 2> > /dev/null | sed -e 's/[^0-9]*//g') > + if [ -n "$monitor_frequency" ]; then > + mdadm_args="$mdadm_args --delay=$monitor_frequency" > + verbose "setting monitor frequency to '$monitor_frequency' > seconds" > + fi > + > + verbose "(monitor) '$PROG --monitor --syslog $mdadm_args'" INFO > + > + # /etc/rc.common doesn't like valid sh constructs like while read > line; do echo $line; done <<< "$(echo hello; echo world)" # 8| > + # Taking the time machine back to sh is rough enough as it is ... I > need to better understand its purpose. I spent too much time > + # in /lib/functions. It's all circa 2006-2013. Yikes. Where's the > man pages? Or even code comments? It would've been way > + # easier just to do *everything* the good ol' sysvinit fashioned way, > or use systemd. Just a gripe, I really do like OpenWrt. > procd_open_instance > - procd_set_param command "$PROG" --monitor --syslog --scan > --config="$CONF" > + procd_set_param command "$PROG" --monitor --syslog $mdadm_args > procd_close_instance > + > + verbose "$config_state,$config_mode config=$config, $config_detail > complete" "$config_level" > } > > stop_service() { > $PROG --stop --scan > + if [ $? -eq 0 ]; then > + verbose "'$PROG --stop --scan' stop_service succeeded" OK > + else > + verbose "'$PROG --stop --scan' stop_service failed" ERROR > + fi > } > - > -- > 1.8.3.1 > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
