No since there is no AC on 2.4GHz band
On Sat, Sep 1, 2018, 20:52 Tom Psyborg <pozega.tomis...@gmail.com> wrote:
> is this correct information? Wireless: 2.4-GHz 802.11ac
>
> On 31/08/2018, Ram Chandra Jangir <rjan...@codeaurora.org> wrote:
> > * SoC: QCA IPQ4019
> > * RAM: 512 MiB
> > * Flash: 32 MiB of SPI NOR and 128 MiB NAND
> > * Wireless: 2.4-GHz 802.11ac, and two 5-GHz 802.11ac
> > * IoT :
> > CSR8811 radio [ supports BT classic and BLE ]
> > SiLabs EFR32MG radio [ supports 802.15.4 ZigBee ]
> >
> > Tested on IPQ ap-dk07.1-c1 Board:
> > 1) NOR boot and NAND boot
> > 2) Tested USB and PCIe interfaces
> > 3) WDOG test
> > 4) cpu frequency scaling
> > 5) ethernet, 2G and 5G WiFi
> >
> > The ap-dk07.1-c1 board is already available in upstream
> > linux v4.17
> >
> > Signed-off-by: Ram Chandra Jangir <rjan...@codeaurora.org>
> > ---
> > .../etc/hotplug.d/firmware/11-ath10k-caldata | 6 +-
> > target/linux/ipq40xx/image/Makefile | 13 +++
> > ...ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch | 99
> > ++++++++++++++++++++++
> > ...4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch | 99
> > ++++++++++++++++++++++
> > ...x-rootfs-conflict-with-OpenWrt-auto-mount.patch | 33 ++++++++
> > ...5-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch | 79
> +++++++++++++++++
> > 6 files changed, 327 insertions(+), 2 deletions(-)
> > create mode 100644
> >
> target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch
> > create mode 100644
> >
> target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch
> > create mode 100644
> >
> target/linux/ipq40xx/patches-4.14/904-Fix-rootfs-conflict-with-OpenWrt-auto-mount.patch
> > create mode 100644
> >
> target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch
> >
> > diff --git
> >
> a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> >
> b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> > index 1d4fd9c..83518c9 100644
> > ---
> >
> a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> > +++
> >
> b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
> > @@ -143,7 +143,8 @@ case "$FIRMWARE" in
> > ;;
> > compex,wpj428 |\
> > openmesh,a42 |\
> > - openmesh,a62)
> > + openmesh,a62 |\
> > + qcom,ap-dk07.1-c1)
> > ath10kcal_extract "0:ART" 4096 12064
> > ;;
> > zyxel,nbg6617 |\
> > @@ -179,7 +180,8 @@ case "$FIRMWARE" in
> > ;;
> > compex,wpj428 |\
> > openmesh,a42 |\
> > - openmesh,a62)
> > + openmesh,a62 |\
> > + qcom,ap-dk07.1-c1)
> > ath10kcal_extract "0:ART" 20480 12064
> > ;;
> > zyxel,nbg6617 |\
> > diff --git a/target/linux/ipq40xx/image/Makefile
> > b/target/linux/ipq40xx/image/Makefile
> > index 5cd11ca..bee2145 100644
> > --- a/target/linux/ipq40xx/image/Makefile
> > +++ b/target/linux/ipq40xx/image/Makefile
> > @@ -207,6 +207,19 @@ define Device/qcom_ap-dk04.1-c1
> > endef
> > TARGET_DEVICES += qcom_ap-dk04.1-c1
> >
> > +define Device/qcom_ap-dk07.1-c1
> > + $(call Device/FitImage)
> > + $(call Device/UbiFit)
> > + BOARD_NAME := ap-dk07.1-c1
> > + DEVICE_DTS := qcom-ipq4019-ap.dk07.1-c1
> > + KERNEL_INSTALL := 1
> > + KERNEL_SIZE := 4096k
> > + BLOCKSIZE := 128k
> > + PAGESIZE := 2048
> > + DEVICE_TITLE := QCA AP-DK07.1-C1
> > +endef
> > +TARGET_DEVICES += qcom_ap-dk07.1-c1
> > +
> > define Device/zyxel_nbg6617
> > $(call Device/FitImageLzma)
> > DEVICE_DTS := qcom-ipq4018-nbg6617
> > diff --git
> >
> a/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch
> >
> b/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch
> > new file mode 100644
> > index 0000000..bcc109f
> > --- /dev/null
> > +++
> >
> b/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch
> > @@ -0,0 +1,99 @@
> > +From f97b2aaaf0734a3a6dd6effff6ee0aaa0a69cab5 Mon Sep 17 00:00:00 2001
> > +From: Sricharan R <sricha...@codeaurora.org>
> > +Date: Fri, 25 May 2018 11:41:17 +0530
> > +Subject: [PATCH] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
> > +
> > +Add the common data for all dk07 based boards.
> > +
> > +Reviewed-by: Abhishek Sahu <abs...@codeaurora.org>
> > +Signed-off-by: Sricharan R <sricha...@codeaurora.org>
> > +Signed-off-by: Andy Gross <andy.gr...@linaro.org>
> > +---
> > + arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 75
> > +++++++++++++++++++++++++++
> > + 1 file changed, 75 insertions(+)
> > + create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> > +
> > +diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> > b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> > +new file mode 100644
> > +index 0000000..9f1a5a66
> > +--- /dev/null
> > ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> > +@@ -0,0 +1,75 @@
> > ++// SPDX-License-Identifier: GPL-2.0
> > ++// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> > ++
> > ++#include "qcom-ipq4019.dtsi"
> > ++#include <dt-bindings/input/input.h>
> > ++#include <dt-bindings/gpio/gpio.h>
> > ++
> > ++/ {
> > ++ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1";
> > ++
> > ++ memory {
> > ++ device_type = "memory";
> > ++ reg = <0x80000000 0x20000000>; /* 512MB */
> > ++ };
> > ++
> > ++ aliases {
> > ++ serial0 = &blsp1_uart1;
> > ++ serial1 = &blsp1_uart2;
> > ++ };
> > ++
> > ++ chosen {
> > ++ stdout-path = "serial0:115200n8";
> > ++ };
> > ++
> > ++ soc {
> > ++ pinctrl@1000000 {
> > ++ serial_0_pins: serial0-pinmux {
> > ++ pins = "gpio16", "gpio17";
> > ++ function = "blsp_uart0";
> > ++ bias-disable;
> > ++ };
> > ++
> > ++ i2c_0_pins: i2c-0-pinmux {
> > ++ pins = "gpio20", "gpio21";
> > ++ function = "blsp_i2c0";
> > ++ bias-disable;
> > ++ };
> > ++
> > ++ nand_pins: nand-pins {
> > ++ pins = "gpio53", "gpio55", "gpio56",
> > ++ "gpio57", "gpio58", "gpio59",
> > ++ "gpio60", "gpio62", "gpio63",
> > ++ "gpio64", "gpio65", "gpio66",
> > ++ "gpio67", "gpio68", "gpio69";
> > ++ function = "qpic";
> > ++ };
> > ++ };
> > ++
> > ++ serial@78af000 {
> > ++ pinctrl-0 = <&serial_0_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "ok";
> > ++ };
> > ++
> > ++ dma@7884000 {
> > ++ status = "ok";
> > ++ };
> > ++
> > ++ i2c@78b7000 { /* BLSP1 QUP2 */
> > ++ pinctrl-0 = <&i2c_0_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "ok";
> > ++ };
> > ++
> > ++ dma@7984000 {
> > ++ status = "ok";
> > ++ };
> > ++
> > ++ qpic-nand@79b0000 {
> > ++ pinctrl-0 = <&nand_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "ok";
> > ++ };
> > ++ };
> > ++};
> > +--
> > +1.9.1
> > +
> > diff --git
> >
> a/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch
> >
> b/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch
> > new file mode 100644
> > index 0000000..655a372
> > --- /dev/null
> > +++
> >
> b/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch
> > @@ -0,0 +1,99 @@
> > +From 5ade893ec03c6612a38d53eaf4324f21e18eeef5 Mon Sep 17 00:00:00 2001
> > +From: Sricharan R <sricha...@codeaurora.org>
> > +Date: Fri, 25 May 2018 11:41:18 +0530
> > +Subject: [PATCH] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board
> > file
> > +
> > +Reviewed-by: Abhishek Sahu <abs...@codeaurora.org>
> > +Signed-off-by: Sricharan R <sricha...@codeaurora.org>
> > +Signed-off-by: Andy Gross <andy.gr...@linaro.org>
> > +---
> > + arch/arm/boot/dts/Makefile | 1 +
> > + arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 64
> > +++++++++++++++++++++++++
> > + 2 files changed, 65 insertions(+)
> > + create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> > +
> > +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > +index 2c002b3..eede5df 100644
> > +--- a/arch/arm/boot/dts/Makefile
> > ++++ b/arch/arm/boot/dts/Makefile
> > +@@ -708,6 +708,7 @@
> > + qcom-ipq4019-ap.dk01.1-c1.dtb \
> > + qcom-ipq4019-a62.dtb \
> > + qcom-ipq4019-ap.dk04.1-c1.dtb \
> > ++ qcom-ipq4019-ap.dk07.1-c1.dtb \
> > + qcom-ipq4028-wpj428.dtb \
> > + qcom-ipq4029-gl-b1300.dtb \
> > + qcom-ipq4029-mr33.dtb \
> > +diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> > b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> > +new file mode 100644
> > +index 0000000..8c7ef65
> > +--- /dev/null
> > ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> > +@@ -0,0 +1,64 @@
> > ++// SPDX-License-Identifier: GPL-2.0
> > ++// Copyright (c) 2018, The Linux Foundation. All rights reserved.
> > ++
> > ++#include "qcom-ipq4019-ap.dk07.1.dtsi"
> > ++
> > ++/ {
> > ++ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
> > ++ compatible = "qcom,ipq4019-ap-dk07.1-c1";
> > ++
> > ++ soc {
> > ++ pci@40000000 {
> > ++ status = "ok";
> > ++ perst-gpio = <&tlmm 38 0x1>;
> > ++ };
> > ++
> > ++ spi@78b6000 {
> > ++ status = "ok";
> > ++ };
> > ++
> > ++ pinctrl@1000000 {
> > ++ serial_1_pins: serial1-pinmux {
> > ++ pins = "gpio8", "gpio9",
> > ++ "gpio10", "gpio11";
> > ++ function = "blsp_uart1";
> > ++ bias-disable;
> > ++ };
> > ++
> > ++ spi_0_pins: spi-0-pinmux {
> > ++ pinmux {
> > ++ function = "blsp_spi0";
> > ++ pins = "gpio13", "gpio14",
> "gpio15";
> > ++ bias-disable;
> > ++ };
> > ++ pinmux_cs {
> > ++ function = "gpio";
> > ++ pins = "gpio12";
> > ++ bias-disable;
> > ++ output-high;
> > ++ };
> > ++ };
> > ++ };
> > ++
> > ++ serial@78b0000 {
> > ++ pinctrl-0 = <&serial_1_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "ok";
> > ++ };
> > ++
> > ++ spi@78b5000 {
> > ++ pinctrl-0 = <&spi_0_pins>;
> > ++ pinctrl-names = "default";
> > ++ status = "ok";
> > ++ cs-gpios = <&tlmm 12 0>;
> > ++
> > ++ m25p80@0 {
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++ reg = <0>;
> > ++ compatible = "n25q128a11";
> > ++ spi-max-frequency = <24000000>;
> > ++ };
> > ++ };
> > ++ };
> > ++};
> > +--
> > +1.9.1
> > +
> > diff --git
> >
> a/target/linux/ipq40xx/patches-4.14/904-Fix-rootfs-conflict-with-OpenWrt-auto-mount.patch
> >
> b/target/linux/ipq40xx/patches-4.14/904-Fix-rootfs-conflict-with-OpenWrt-auto-mount.patch
> > new file mode 100644
> > index 0000000..0b2397f
> > --- /dev/null
> > +++
> >
> b/target/linux/ipq40xx/patches-4.14/904-Fix-rootfs-conflict-with-OpenWrt-auto-mount.patch
> > @@ -0,0 +1,33 @@
> > +From ca96c645d61b4462fe6ee3d815717335214f27c2 Mon Sep 17 00:00:00 2001
> > +From: Ram Chandra Jangir <rjan...@codeaurora.org>
> > +Date: Sat, 9 Jun 2018 20:31:50 +0530
> > +Subject: [PATCH] Fix rootfs conflict with OpenWrt auto mounting
> > +
> > +Signed-off-by: Ram Chandra Jangir <rjan...@codeaurora.org>
> > +---
> > + drivers/mtd/mtdpart.c | 9 ++++++---
> > + 1 files changed, 6 insertions(+), 3 deletions(-)
> > +
> > +diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
> > +index c87b71c..4980f93 100644
> > +--- a/drivers/mtd/mtdpart.c
> > ++++ b/drivers/mtd/mtdpart.c
> > +@@ -831,9 +831,12 @@ static void mtd_partition_split(struct mtd_info
> > *master, struct mtd_part *part)
> > + return;
> > +
> > + if (!strcmp(part->mtd.name, "rootfs")) {
> > +- run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
> > +-
> > +- rootfs_found = 1;
> > ++ if(mtd_type_is_nand(master)) {
> > ++ part->mtd.name="ubi";
> > ++ } else {
> > ++ run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
> > ++ rootfs_found = 1;
> > ++ }
> > + }
> > +
> > + if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
> > +--
> > +2.7.2
> > +
> > diff --git
> >
> a/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch
> >
> b/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch
> > new file mode 100644
> > index 0000000..9a32719
> > --- /dev/null
> > +++
> >
> b/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch
> > @@ -0,0 +1,79 @@
> > +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> > ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts
> > +@@ -5,7 +5,7 @@
> > +
> > + / {
> > + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
> > +- compatible = "qcom,ipq4019-ap-dk07.1-c1";
> > ++ compatible = "qcom,ap-dk07.1-c1", "qcom,ipq4019";
> > +
> > + soc {
> > + pci@40000000 {
> > +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> > ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
> > +@@ -13,15 +13,6 @@
> > + reg = <0x80000000 0x20000000>; /* 512MB */
> > + };
> > +
> > +- aliases {
> > +- serial0 = &blsp1_uart1;
> > +- serial1 = &blsp1_uart2;
> > +- };
> > +-
> > +- chosen {
> > +- stdout-path = "serial0:115200n8";
> > +- };
> > +-
> > + soc {
> > + pinctrl@1000000 {
> > + serial_0_pins: serial0-pinmux {
> > +@@ -67,9 +71,49 @@
> > + };
> > +
> > + qpic-nand@79b0000 {
> > ++ compatible = "qcom,ipq4019-nand", "qcom,msm-nand";
> > + pinctrl-0 = <&nand_pins>;
> > + pinctrl-names = "default";
> > + status = "ok";
> > ++
> > ++ nand@0 {
> > ++ compatible = "qcom,nandcs";
> > ++ reg = <0>;
> > ++ #address-cells = <1>;
> > ++ #size-cells = <1>;
> > ++
> > ++ nand-ecc-strength = <4>;
> > ++ nand-ecc-step-size = <512>;
> > ++ nand-bus-width = <8>;
> > ++ };
> > ++ };
> > ++
> > ++ mdio@90000 {
> > ++ status = "okay";
> > ++ };
> > ++
> > ++ ess-switch@c000000 {
> > ++ status = "okay";
> > ++ switch_mac_mode = <0x0>; /* mac mode for
> RGMII RMII */
> > ++ switch_initvlas = <
> > ++ 0x0007c 0x54 /* PORT0_STATUS */
> > ++ >;
> > ++ };
> > ++
> > ++ ess-psgmii@98000 {
> > ++ status = "okay";
> > ++ };
> > ++
> > ++ edma@c080000 {
> > ++ status = "okay";
> > ++ };
> > ++
> > ++ wifi@a000000 {
> > ++ status = "okay";
> > ++ };
> > ++
> > ++ wifi@a800000 {
> > ++ status = "okay";
> > + };
> > + };
> > + };
> > --
> > 1.9.1
> >
> >
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel@lists.openwrt.org
> > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> >
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
