Sorry, It was a typo mistake, actually it is Wireless: 2.4-GHz 802.11ng . I will update in next patch set v2.
Thanks, Ram > -----Original Message----- > From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf Of Tom Psyborg > Sent: Sunday, September 02, 2018 12:22 AM > To: Ram Chandra Jangir <rjan...@codeaurora.org> > Cc: openwrt-devel@lists.openwrt.org; nar...@codeaurora.org > Subject: Re: [OpenWrt-Devel] [PATCH] ipq40xx: Add support for IPQ4019 ap-dk07.1-c1 > > is this correct information? Wireless: 2.4-GHz 802.11ac > > On 31/08/2018, Ram Chandra Jangir <rjan...@codeaurora.org> wrote: > * SoC: QCA IPQ4019 > * RAM: 512 MiB > * Flash: 32 MiB of SPI NOR and 128 MiB NAND > * Wireless: 2.4-GHz 802.11ac, and two 5-GHz 802.11ac > * IoT : > CSR8811 radio [ supports BT classic and BLE ] > SiLabs EFR32MG radio [ supports 802.15.4 ZigBee ] > > Tested on IPQ ap-dk07.1-c1 Board: > 1) NOR boot and NAND boot > 2) Tested USB and PCIe interfaces > 3) WDOG test > 4) cpu frequency scaling > 5) ethernet, 2G and 5G WiFi > > The ap-dk07.1-c1 board is already available in upstream linux v4.17 > > Signed-off-by: Ram Chandra Jangir <rjan...@codeaurora.org> > --- > .../etc/hotplug.d/firmware/11-ath10k-caldata | 6 +- > target/linux/ipq40xx/image/Makefile | 13 +++ > ...ipq4019-Add-ipq4019-ap.dk07.1-common-data.patch | 99 > ++++++++++++++++++++++ > ...4019-Add-qcom-ipq4019-ap.dk07.1-c1-board-.patch | 99 > ++++++++++++++++++++++ > ...x-rootfs-conflict-with-OpenWrt-auto-mount.patch | 33 ++++++++ > ...5-dts-qcom-ipq4019-ap.dk07.1-enable-nodes.patch | 79 > +++++++++++++++++ > 6 files changed, 327 insertions(+), 2 deletions(-) create mode > 100644 > target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap.d > k07.1-common-data.patch > create mode 100644 > target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq4019 > -ap.dk07.1-c1-board-.patch > create mode 100644 > target/linux/ipq40xx/patches-4.14/904-Fix-rootfs-conflict-with-OpenWrt > -auto-mount.patch > create mode 100644 > target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-enabl > e-nodes.patch > > diff --git > a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-cal > data > b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-cal > data > index 1d4fd9c..83518c9 100644 > --- > a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-cal > data > +++ > b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-cal > data @@ -143,7 +143,8 @@ case "$FIRMWARE" in > ;; > compex,wpj428 |\ > openmesh,a42 |\ > - openmesh,a62) > + openmesh,a62 |\ > + qcom,ap-dk07.1-c1) > ath10kcal_extract "0:ART" 4096 12064 > ;; > zyxel,nbg6617 |\ > @@ -179,7 +180,8 @@ case "$FIRMWARE" in > ;; > compex,wpj428 |\ > openmesh,a42 |\ > - openmesh,a62) > + openmesh,a62 |\ > + qcom,ap-dk07.1-c1) > ath10kcal_extract "0:ART" 20480 12064 > ;; > zyxel,nbg6617 |\ > diff --git a/target/linux/ipq40xx/image/Makefile > b/target/linux/ipq40xx/image/Makefile > index 5cd11ca..bee2145 100644 > --- a/target/linux/ipq40xx/image/Makefile > +++ b/target/linux/ipq40xx/image/Makefile > @@ -207,6 +207,19 @@ define Device/qcom_ap-dk04.1-c1 endef > TARGET_DEVICES += qcom_ap-dk04.1-c1 > > +define Device/qcom_ap-dk07.1-c1 > + $(call Device/FitImage) > + $(call Device/UbiFit) > + BOARD_NAME := ap-dk07.1-c1 > + DEVICE_DTS := qcom-ipq4019-ap.dk07.1-c1 > + KERNEL_INSTALL := 1 > + KERNEL_SIZE := 4096k > + BLOCKSIZE := 128k > + PAGESIZE := 2048 > + DEVICE_TITLE := QCA AP-DK07.1-C1 > +endef > +TARGET_DEVICES += qcom_ap-dk07.1-c1 > + > define Device/zyxel_nbg6617 > $(call Device/FitImageLzma) > DEVICE_DTS := qcom-ipq4018-nbg6617 > diff --git > a/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap > .dk07.1-common-data.patch > b/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap > .dk07.1-common-data.patch > new file mode 100644 > index 0000000..bcc109f > --- /dev/null > +++ > b/target/linux/ipq40xx/patches-4.14/902-ARM-dts-ipq4019-Add-ipq4019-ap > .dk07.1-common-data.patch > @@ -0,0 +1,99 @@ > +From f97b2aaaf0734a3a6dd6effff6ee0aaa0a69cab5 Mon Sep 17 00:00:00 > +2001 > +From: Sricharan R <sricha...@codeaurora.org> > +Date: Fri, 25 May 2018 11:41:17 +0530 > +Subject: [PATCH] ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data > + > +Add the common data for all dk07 based boards. > + > +Reviewed-by: Abhishek Sahu <abs...@codeaurora.org> > +Signed-off-by: Sricharan R <sricha...@codeaurora.org> > +Signed-off-by: Andy Gross <andy.gr...@linaro.org> > +--- > + arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 75 > +++++++++++++++++++++++++++ > + 1 file changed, 75 insertions(+) > + create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi > + > +diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi > b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi > +new file mode 100644 > +index 0000000..9f1a5a66 > +--- /dev/null > ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi > +@@ -0,0 +1,75 @@ > ++// SPDX-License-Identifier: GPL-2.0 > ++// Copyright (c) 2018, The Linux Foundation. All rights reserved. > ++ > ++#include "qcom-ipq4019.dtsi" > ++#include <dt-bindings/input/input.h> #include > ++<dt-bindings/gpio/gpio.h> > ++ > ++/ { > ++ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1"; > ++ > ++ memory { > ++ device_type = "memory"; > ++ reg = <0x80000000 0x20000000>; /* 512MB */ > ++ }; > ++ > ++ aliases { > ++ serial0 = &blsp1_uart1; > ++ serial1 = &blsp1_uart2; > ++ }; > ++ > ++ chosen { > ++ stdout-path = "serial0:115200n8"; > ++ }; > ++ > ++ soc { > ++ pinctrl@1000000 { > ++ serial_0_pins: serial0-pinmux { > ++ pins = "gpio16", "gpio17"; > ++ function = "blsp_uart0"; > ++ bias-disable; > ++ }; > ++ > ++ i2c_0_pins: i2c-0-pinmux { > ++ pins = "gpio20", "gpio21"; > ++ function = "blsp_i2c0"; > ++ bias-disable; > ++ }; > ++ > ++ nand_pins: nand-pins { > ++ pins = "gpio53", "gpio55", "gpio56", > ++ "gpio57", "gpio58", "gpio59", > ++ "gpio60", "gpio62", "gpio63", > ++ "gpio64", "gpio65", "gpio66", > ++ "gpio67", "gpio68", "gpio69"; > ++ function = "qpic"; > ++ }; > ++ }; > ++ > ++ serial@78af000 { > ++ pinctrl-0 = <&serial_0_pins>; > ++ pinctrl-names = "default"; > ++ status = "ok"; > ++ }; > ++ > ++ dma@7884000 { > ++ status = "ok"; > ++ }; > ++ > ++ i2c@78b7000 { /* BLSP1 QUP2 */ > ++ pinctrl-0 = <&i2c_0_pins>; > ++ pinctrl-names = "default"; > ++ status = "ok"; > ++ }; > ++ > ++ dma@7984000 { > ++ status = "ok"; > ++ }; > ++ > ++ qpic-nand@79b0000 { > ++ pinctrl-0 = <&nand_pins>; > ++ pinctrl-names = "default"; > ++ status = "ok"; > ++ }; > ++ }; > ++}; > +-- > +1.9.1 > + > diff --git > a/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq40 > 19-ap.dk07.1-c1-board-.patch > b/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq40 > 19-ap.dk07.1-c1-board-.patch > new file mode 100644 > index 0000000..655a372 > --- /dev/null > +++ > b/target/linux/ipq40xx/patches-4.14/903-ARM-dts-ipq4019-Add-qcom-ipq40 > 19-ap.dk07.1-c1-board-.patch > @@ -0,0 +1,99 @@ > +From 5ade893ec03c6612a38d53eaf4324f21e18eeef5 Mon Sep 17 00:00:00 > +2001 > +From: Sricharan R <sricha...@codeaurora.org> > +Date: Fri, 25 May 2018 11:41:18 +0530 > +Subject: [PATCH] ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 > +board > file > + > +Reviewed-by: Abhishek Sahu <abs...@codeaurora.org> > +Signed-off-by: Sricharan R <sricha...@codeaurora.org> > +Signed-off-by: Andy Gross <andy.gr...@linaro.org> > +--- > + arch/arm/boot/dts/Makefile | 1 + > + arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts | 64 > +++++++++++++++++++++++++ > + 2 files changed, 65 insertions(+) > + create mode 100644 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts > + > +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > +index 2c002b3..eede5df 100644 > +--- a/arch/arm/boot/dts/Makefile > ++++ b/arch/arm/boot/dts/Makefile > +@@ -708,6 +708,7 @@ > + qcom-ipq4019-ap.dk01.1-c1.dtb \ > + qcom-ipq4019-a62.dtb \ > + qcom-ipq4019-ap.dk04.1-c1.dtb \ > ++ qcom-ipq4019-ap.dk07.1-c1.dtb \ > + qcom-ipq4028-wpj428.dtb \ > + qcom-ipq4029-gl-b1300.dtb \ > + qcom-ipq4029-mr33.dtb \ > +diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts > b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts > +new file mode 100644 > +index 0000000..8c7ef65 > +--- /dev/null > ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts > +@@ -0,0 +1,64 @@ > ++// SPDX-License-Identifier: GPL-2.0 > ++// Copyright (c) 2018, The Linux Foundation. All rights reserved. > ++ > ++#include "qcom-ipq4019-ap.dk07.1.dtsi" > ++ > ++/ { > ++ model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; > ++ compatible = "qcom,ipq4019-ap-dk07.1-c1"; > ++ > ++ soc { > ++ pci@40000000 { > ++ status = "ok"; > ++ perst-gpio = <&tlmm 38 0x1>; > ++ }; > ++ > ++ spi@78b6000 { > ++ status = "ok"; > ++ }; > ++ > ++ pinctrl@1000000 { > ++ serial_1_pins: serial1-pinmux { > ++ pins = "gpio8", "gpio9", > ++ "gpio10", "gpio11"; > ++ function = "blsp_uart1"; > ++ bias-disable; > ++ }; > ++ > ++ spi_0_pins: spi-0-pinmux { > ++ pinmux { > ++ function = "blsp_spi0"; > ++ pins = "gpio13", "gpio14", "gpio15"; > ++ bias-disable; > ++ }; > ++ pinmux_cs { > ++ function = "gpio"; > ++ pins = "gpio12"; > ++ bias-disable; > ++ output-high; > ++ }; > ++ }; > ++ }; > ++ > ++ serial@78b0000 { > ++ pinctrl-0 = <&serial_1_pins>; > ++ pinctrl-names = "default"; > ++ status = "ok"; > ++ }; > ++ > ++ spi@78b5000 { > ++ pinctrl-0 = <&spi_0_pins>; > ++ pinctrl-names = "default"; > ++ status = "ok"; > ++ cs-gpios = <&tlmm 12 0>; > ++ > ++ m25p80@0 { > ++ #address-cells = <1>; > ++ #size-cells = <1>; > ++ reg = <0>; > ++ compatible = "n25q128a11"; > ++ spi-max-frequency = <24000000>; > ++ }; > ++ }; > ++ }; > ++}; > +-- > +1.9.1 > + > diff --git > a/target/linux/ipq40xx/patches-4.14/904-Fix-rootfs-conflict-with-OpenW > rt-auto-mount.patch > b/target/linux/ipq40xx/patches-4.14/904-Fix-rootfs-conflict-with-OpenW > rt-auto-mount.patch > new file mode 100644 > index 0000000..0b2397f > --- /dev/null > +++ > b/target/linux/ipq40xx/patches-4.14/904-Fix-rootfs-conflict-with-OpenW > rt-auto-mount.patch > @@ -0,0 +1,33 @@ > +From ca96c645d61b4462fe6ee3d815717335214f27c2 Mon Sep 17 00:00:00 > +2001 > +From: Ram Chandra Jangir <rjan...@codeaurora.org> > +Date: Sat, 9 Jun 2018 20:31:50 +0530 > +Subject: [PATCH] Fix rootfs conflict with OpenWrt auto mounting > + > +Signed-off-by: Ram Chandra Jangir <rjan...@codeaurora.org> > +--- > + drivers/mtd/mtdpart.c | 9 ++++++--- > + 1 files changed, 6 insertions(+), 3 deletions(-) > + > +diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index > +c87b71c..4980f93 100644 > +--- a/drivers/mtd/mtdpart.c > ++++ b/drivers/mtd/mtdpart.c > +@@ -831,9 +831,12 @@ static void mtd_partition_split(struct mtd_info > *master, struct mtd_part *part) > + return; > + > + if (!strcmp(part->mtd.name, "rootfs")) { > +- run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS); > +- > +- rootfs_found = 1; > ++ if(mtd_type_is_nand(master)) { > ++ part->mtd.name="ubi"; > ++ } else { > ++ run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS); > ++ rootfs_found = 1; > ++ } > + } > + > + if (!strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) && > +-- > +2.7.2 > + > diff --git > a/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-ena > ble-nodes.patch > b/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-ena > ble-nodes.patch > new file mode 100644 > index 0000000..9a32719 > --- /dev/null > +++ > b/target/linux/ipq40xx/patches-4.14/905-dts-qcom-ipq4019-ap.dk07.1-ena > ble-nodes.patch > @@ -0,0 +1,79 @@ > +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts > ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts > +@@ -5,7 +5,7 @@ > + > + / { > + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1"; > +- compatible = "qcom,ipq4019-ap-dk07.1-c1"; > ++ compatible = "qcom,ap-dk07.1-c1", "qcom,ipq4019"; > + > + soc { > + pci@40000000 { > +--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi > ++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi > +@@ -13,15 +13,6 @@ > + reg = <0x80000000 0x20000000>; /* 512MB */ > + }; > + > +- aliases { > +- serial0 = &blsp1_uart1; > +- serial1 = &blsp1_uart2; > +- }; > +- > +- chosen { > +- stdout-path = "serial0:115200n8"; > +- }; > +- > + soc { > + pinctrl@1000000 { > + serial_0_pins: serial0-pinmux { > +@@ -67,9 +71,49 @@ > + }; > + > + qpic-nand@79b0000 { > ++ compatible = "qcom,ipq4019-nand", "qcom,msm-nand"; > + pinctrl-0 = <&nand_pins>; > + pinctrl-names = "default"; > + status = "ok"; > ++ > ++ nand@0 { > ++ compatible = "qcom,nandcs"; > ++ reg = <0>; > ++ #address-cells = <1>; > ++ #size-cells = <1>; > ++ > ++ nand-ecc-strength = <4>; > ++ nand-ecc-step-size = <512>; > ++ nand-bus-width = <8>; > ++ }; > ++ }; > ++ > ++ mdio@90000 { > ++ status = "okay"; > ++ }; > ++ > ++ ess-switch@c000000 { > ++ status = "okay"; > ++ switch_mac_mode = <0x0>; /* mac mode for RGMII RMII */ > ++ switch_initvlas = < > ++ 0x0007c 0x54 /* PORT0_STATUS */ > ++ >; > ++ }; > ++ > ++ ess-psgmii@98000 { > ++ status = "okay"; > ++ }; > ++ > ++ edma@c080000 { > ++ status = "okay"; > ++ }; > ++ > ++ wifi@a000000 { > ++ status = "okay"; > ++ }; > ++ > ++ wifi@a800000 { > ++ status = "okay"; > + }; > + }; > + }; > -- > 1.9.1 > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
