Signed-off-by: Bjørn Mork <bj...@mork.no>
---
.../linux/ramips/base-files/etc/board.d/02_network | 4 +
.../ramips/base-files/etc/board.d/03_gpio_switches | 3 +
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 6 +-
target/linux/ramips/dts/WAP6805.dts | 142 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 24 +++-
6 files changed, 179 insertions(+), 3 deletions(-)
create mode 100644 target/linux/ramips/dts/WAP6805.dts
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 9e9ecbcb51df..f53bf02d221f 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -404,6 +404,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan:2" "1:lan:1" "4:wan" "6@eth0"
;;
+ wap6805)
+ ucidef_add_switch "switch0" \
+ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "6@eth0"
+ ;;
*)
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
if [ -n "${RT3X5X}" ]; then
diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
index a847a64d6bb0..9753d5d69df8 100755
--- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches
@@ -17,6 +17,9 @@ ubnt-erx-sfp)
ucidef_add_gpio_switch "poe_power_port3" "PoE Power Port3" "499"
ucidef_add_gpio_switch "poe_power_port4" "PoE Power Port4" "500"
;;
+wap6805)
+ ucidef_add_gpio_switch "qtn_power" "Quantenna Module Power" "16"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 5741cbd2ee13..5afae99cd41e 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -718,6 +718,9 @@ ramips_board_detect() {
*"ZyXEL Keenetic Viva")
name="kng_rc"
;;
+ *"ZyXEL WAP6805")
+ name="wap6805"
+ ;;
*"YK1")
name="youku-yk1"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 7558b4e3168a..238290c7ea37 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -304,7 +304,8 @@ platform_check_image() {
mir3g|\
r6220|\
ubnt-erx|\
- ubnt-erx-sfp)
+ ubnt-erx-sfp|\
+ wap6805)
nand_do_platform_check "$board" "$1"
return $?;
;;
@@ -361,7 +362,8 @@ platform_do_upgrade() {
mir3g|\
r6220|\
ubnt-erx|\
- ubnt-erx-sfp)
+ ubnt-erx-sfp|\
+ wap6805)
nand_do_upgrade "$ARGV"
;;
*)
diff --git a/target/linux/ramips/dts/WAP6805.dts
b/target/linux/ramips/dts/WAP6805.dts
new file mode 100644
index 000000000000..53ef7301d13b
--- /dev/null
+++ b/target/linux/ramips/dts/WAP6805.dts
@@ -0,0 +1,142 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,wap6805", "mediatek,mt7621-soc";
+ model = "ZyXEL WAP6805";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ aliases {
+ led-status = &led_system;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ system_red {
+ label = "wap6805:red:system";
+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_system: system_green {
+ label = "wap6805:green:system";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "MRD";
+ reg = <0x100000 0x100000>;
+ read-only;
+ };
+
+ factory: partition@200000 {
+ label = "Factory";
+ reg = <0x200000 0x100000>;
+ read-only;
+ };
+
+ partition@300000 {
+ label = "Config";
+ reg = <0x300000 0x100000>;
+ };
+
+ partition@400000 {
+ label = "firmware";
+ reg = <0x400000 0x2000000 >;
+ };
+
+ partition@2400000 {
+ label = "Kernel2";
+ reg = <0x2400000 0x2000000 >;
+ };
+
+ partition@4400000 {
+ label = "Private";
+ reg = <0x4400000 0x100000>;
+ };
+
+ partition@4500000 {
+ label = "Log";
+ reg = <0x4500000 0x1000000>;
+ };
+
+ partition@5500000 {
+ label = "App";
+ reg = <0x5500000 0x2b00000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+ pcie0 {
+ mt76@0,0 {
+ mediatek,mtd-eeprom = <&factory 0>;
+ };
+ };
+
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&xhci {
+ status = "disabled";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uart3", "jtag", "wdt", "spi",
"sdhci";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk
b/target/linux/ramips/image/mt7621.mk
index a4a0f3d29382..cc37c53bad28 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -3,7 +3,7 @@
#
KERNEL_DTB += -d21
-DEVICE_VARS += TPLINK_BOARD_ID TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV
+DEVICE_VARS += TPLINK_BOARD_ID TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV
MITRASTAR_MODEL_ID MITRASTAR_CUST_ID
define Build/elecom-gst-factory
$(eval product=$(word 1,$(1)))
@@ -531,6 +531,28 @@ define Device/zbt-wg3526-32M
endef
TARGET_DEVICES += zbt-wg3526-32M
+define Device/wap6805
+ DTS := WAP6805
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ FILESYSTEMS := squashfs
+ IMAGE_SIZE := $(ralink_default_fw_size_32M)
+ DEVICE_TITLE := ZyXEL WAP6805
+ DEVICE_PACKAGES := \
+ kmod-mt7603 kmod-mt76x2 \
+ kmod-usb3 kmod-usb-ledtrig-usbport wpad-mini \
+ -swconfig
+ MITRASTAR_MODEL_ID := 8008
+ MITRASTAR_CUST_ID := ffff
+ KERNEL_SIZE := 4096k
+ KERNEL := $(KERNEL_DTB) | mitrastar lzma
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ UBINIZE_OPTS := -E 5
+ IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi |
check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += wap6805
+
# FIXME: is this still needed?
define Image/Prepare
#define Build/Compile
--
2.11.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
