On Wed, Jan 17, 2018 at 6:11 PM, Hans Ulli Kroll <ulli.kr...@googlemail.com> wrote: > Hi Linus
>> I managed to boot a v4.16-ish kernel and OpenWRT rootfs >> on the D-Link DNS-313 >> (reference https://dflund.se/~triad/krad/dlink-dns-313/) > > interesting device, especially for the VBUS "solution", so I decided to > buy for testing. > I assume VBUS is only connected to GPIO. It's pretty easy to use. Some twists to get the console soldered but can hopefully soon be used with a tailored harddrive and just network access. >> I used the raidsonic rootfs built from scratch (the prebuilt >> images on the site seem broken, just contains zeroes). > > OpenWRT is currently in (re)merging status from LEDE > maybe LEDE images can work. > > I've done a testbuild with current LEDE and ext4 target which fails, > make be a > make -j1 V=s > or a testbuild for my ALIX6F2 give me some light here. I got it working I think ... the git is a mirror of LEDE these days so should be the same. >> sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) >> sd 0:0:0:0: [sda] Write Protect is off >> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't >> support DPO or FUA >> sda: sda1 sda2 sda3 sda4 >> sd 0:0:0:0: [sda] Attached SCSI disk >> EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities >> EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities >> EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) >> VFS: Mounted root (ext4 filesystem) readonly on device 8:4. > > read only ? I fixed it with "rw" in the cmdline, but still the same problem... :( > I think this must be read write, must verify this with my ALIX6F2 running > openWRT on a CF card with ext4 as rootfs. Sadly this doesn't solve it... I confirmed the problem is something with OpenWRT because a flat, dirt-simple Busybox rootfs boots fine. It's probably my fault anyways, just need to figure it out. Yours, Linus Walleij _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
