Hi folks, I managed to boot a v4.16-ish kernel and OpenWRT rootfs on the D-Link DNS-313 (reference https://dflund.se/~triad/krad/dlink-dns-313/)
I used the raidsonic rootfs built from scratch (the prebuilt images on the site seem broken, just contains zeroes). I wonder what kernel requirements OpenWRT has? I have just enabled very basic hardware support so far. The boot hangs waiting for I guess udev so I would guess some event-related configs are required? Is there a list of required configs? My console: Booting Linux on physical CPU 0x0 Linux version 4.15.0-rc7+ (linus@fabina) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02)) #39 PREEMPT Tue Jan 16 23:09:18 CET 2018 CPU: FA526 [66015261] revision 1 (ARMv4), cr=0000397f CPU: VIVT data cache, VIVT instruction cache OF: fdt: Machine model: D-Link DNS-313 1-Bay Network Storage Enclosure Memory policy: Data cache writeback (....) ata1.00: ATA-6: ST3160023AS, 3.05, max UDMA/133 ata1.00: 312581808 sectors, multi 0: LBA48 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST3160023AS 3.05 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:4. Freeing unused kernel memory: 188K This architecture does not have kernel memory protection. init: Console is alive init: - watchdog - init: - preinit - procd: - early - procd: - watchdog - procd: - watchdog - procd: - ubus - random: crng init done I guess it is waiting for ubus events. Yours, Linus Walleij _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
